Reviews
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
I tried exhaust pipe, Silencer, Bracket with Titanium.
I only came up with K-FACTORY so decided here.
Titanium baking is on and stands out!
It is a little expensive so it is a star Minus 1.
View detail
Purchased for Repair
Since I did not have Lever, Wire in the second-hand Exhaust System, I ordered it, but it took 1 month to arrive
Finally I thought about installing and installing Wire handling problems etc. etc. I cut the Lever part half and put it on. It became Short lever but it can be used without problems
I thought it would be heavier to move, but I am fine at all.
Since Lever part is resin, it deteriorates with ultraviolet ray etc etc. I am concerned
View detail
Appearance Refreshing Surprisingly sturdy
I was worried about strength by saying Aluminum, but no particular problem.
OEMTandem Footpeg's Exhaust Bracket position and a little gap, but installation can be done without difficulty.
Basically it is satisfactory, but the price is a bit high, so four stars.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R
This Stay was found when the left Stay thought halfway whether we could do something not at all, after exchanging the Muffler for the one right taking out.Since it had become the structure where the Stay part of the Tandem step and the Stay part of a Glov
This Stay was found when the left Stay thought halfway whether we could do something not at all, after exchanging the Muffler for the one right taking out.Since it had become the structure where the Stay part of the Tandem step and the Stay part of a Glove bar could be removed, according to its use, it attached to the Simple as much as possible.
The useless thing was lost entirely, appearance felt it refreshed, finishing and accuracy of the product itself are very high, and it is large satisfaction at the effect as expected.Although the price of a Neck is high, it is the impression from which considering structure it suffers of being nothing.
View detail
We recommend you as a ZX-10R 04 Dress-up parts. I think that it is almost attached also by an external Muffler if an angle is the same as a pure Muffler. Although he had followed the Trickster, since the fixing position had become far for a while
We recommend you as a ZX-10R 04
Dress-up parts.
I think that it is almost attached also by an external Muffler if an angle is the same as a pure Muffler.
Although he had followed the Trickster, since the fixing position had become far for a while, when a Bolt and color were extended, it was decided perfectly.
View detail
Only by processing and attachment which thinks it is beautiful and are good also for appearance removing and exchanging a NORMAL, the Screw of easy free attachment, I think that it will be perfect if the Silencer side excels even back 5 mm to
Only by processing and
attachment which thinks it is beautiful and are good also for appearance removing and exchanging a NORMAL, the Screw of easy
free attachment,
I think that it will be perfect if the Silencer side excels even back 5 mm to a slight degree -- as [ reach / although the Silencer band of the
Carbon band is used / with an attached Screw / a special Lock nut ]
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although he bought an external Exhaust pipe, uneasiness to fixation -- Are such parts sold too? Although making is solid and safe, only a few becomes outside and interference of management of a Muffler only a Rear brake pedal and a few (it is -
Although he bought an external Exhaust pipe, uneasiness to fixation --
Are such parts sold too?
Although making
is solid and safe, only a few becomes outside and interference of management of a Muffler only a Rear brake pedal and a few (it is --, as it fell before and the Pedal had bent.)! The Pedal was reconstructed more highly and it became good for the time being.
View detail
[Webike Monitor] It purchased in order to also remove a Tandem step simultaneously, since the Muffler is changed. The circumference of rear one felt it refreshed only by exchanging, and appearance also became light. Good shoppi
[Webike Monitor] It purchased in order to also remove a Tandem step simultaneously, since the
Muffler is changed.
The circumference of rear one felt it refreshed only by exchanging, and appearance also became light.
Good shopping was carried out.
View detail
[Webike Monitor] attachment vehicles are set to CB1300SF (SC40). In removing a Tandem step, since it seldom rode in twos, purchase and attachment were carried out. I think that finishing of the products and a Cost performance are the
[Webike Monitor]
attachment vehicles are set to CB1300SF (SC40).
In removing a Tandem step, since it seldom rode in twos, purchase and attachment were carried out.
I think that finishing of the
products and a Cost performance are the highest.
If it attaches as it is, the Silencer would approach the car-body side too much, and the inner side will have interfered in the Rear shock etc., so that the affinity with the collecting pipe (product made from Nojima) which he has merely attached may not be so good.
The suitable color was found there, and it inserted between the Stay and the Band, and canceled by taking out a Silencer outside.
Since finishing is really beautiful also at
, it is very much satisfied.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since I exchanged for the external exhaust pipe, a three-point stop was used just to make sure. I think that it is effective since it is a large motorcycle of vibration. The vibration after attachment decreases and it is good. In the case of the exhaust p
Since I exchanged for the external exhaust pipe, a three-point stop was used just to make sure. I think that it is effective since it is a large motorcycle of vibration. The vibration after attachment decreases and it is good. In the case of the exhaust pipe of the same length as genuine, the band and stay which stop an exhaust pipe and a muffler are fastened together, but it was somewhat difficult to insert stay in a band. View detail
Although I thought that appearance was quite good, it was felt as the kana ? heavier than a somewhat pure tandem step.
Although I thought that appearance was quite good, it was felt as the kana ? heavier than a somewhat pure tandem step. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
It is charm that 笙ｪ normal which the tandem step was lost and was felt refreshed, and a fixing position do not change!
It is charm that 笙ｪ normal which the tandem step was lost and was felt refreshed, and a fixing position do not change! View detail