Reviews
Ladybird exhaust bracket
Great upgrade for the cb13 if your running without pillion pegs this looks good and is well made,it didn't take long to fit very pleased with this hanger View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Ladybird excellent upgrade
Very pleased with overall appearance and quality. Installation was very quick and allowed me to remove passenger pegs. This gives a much 'cleaner' look than stock! View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Repurchase
Until recently, I had been using KFACTORY's CLRAluminum Exhaust Bracket, which is a bracket that is attached to the top of the RightRear suspension, but when driving at low speeds, the bracket vibrated and made me uneasy. I was going to replace it with BirdParts' Normal position type bracket, but the stainless steel bolt and nut that fixes the Muffler silencer got damaged and I couldn't remove it. I had no choice but to cut the bracket with Grinder and it became unusable. The bending and welding is beautiful, the strength is perfect, and the price is not too expensive.
However, if the bolt for the exhaust system is made of Stainless Steel, it will be easy to get damaged, so it is safer to apply Thread Compound or to use a normal steel bolt.
View detail
Fits: HONDA VTR1000 SP2, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VTR1000 SP1
ladybird exhaust hangers.
These hangers are fantastic !!, no one rides a passenger on a RC51 for any time or long before they say thats enough, this is the route to go !!! and are so trick looking and light weight, TOO bad we cant get the titanium ones any more. Will go great with the exhaust which in their selves are in a league of their own, Thank you Jose View detail
It's pretty good!
It is very lightweight and beautifully made, but it needed a color to be installed, probably because of the compatibility with WYVERN Exhaust.
Installation is easy, so even beginners will find Large sturdy.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
image
I couldn't post a picture in my last impression, so I'll post it here. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Installed on ZrX1200 DAEG
This is the impression after using it for about one year after purchasing and installing it.
I installed this Lady Bird's Aluminum Exhaust Bracket on my previous ZrX1100, and it was good parenthesis. I think the surface is Aluminum with Buffing, but even if I polish it well, it is oxidized to white. It is a single rider spec. to replace the normal tandem stepBracket on the exhaust system side, but the shape is good and the parenthesis is good. It is Recommendation.
View detail
It's a SMART look.
Changing the Silencer will also change the Silencer Bracket to give it a more custom look.:Aluminum makes it lightweight and buffed, so it looks great and has a SMART finish. View detail
Beautiful piece, good price
Perfect fit and quality. Installed in under 5 minutes. Also 5.1oz weight reduction from stock passenger peg. I really enjoy the polished look. Also it comes with x3 stainless steel bolts and washers and a nut. View detail
Fits: HONDA VTR1000 SP2, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VTR1000 SP1
Nice Product
I have an RC51 SP2 (VTR1000RR SP2 in the rest of the world I think), and bought these to eliminate the stock exhaust hangers and passenger pegs. I have Sato Ti low mount exhaust, and the Sato titanium hangers I wanted are no longer available. There are a couple other offerings, but they are machine cut pieces made from sheet aluminum. These are very pretty pieces, made from machine bent aluminum rod, that really cleaned up the look of the bike. They fit exactly like the stock OEM hangers, so don’t buy these for high mount or Banzai mounted systems. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR750, SUZUKI GSXR600
High cost performance
I tried the cheap CHINA
I've been looking for a new one because of its accuracy and texture
I am satisfied with the quality and accuracy of the product, which is beyond the price!
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR750, SUZUKI GSXR600
High cost performance than expected
I installed it on the GSX-R1000 K1
It's an old motorcycle now, and it took me a while to find one bracket
I was struggling with it So I had no choice but to go for a very cheap Chinese one
I used to order it from overseas
But, as you can see, strength and precision
And I found this here
The accuracy is Exactly, and the rigidity seems to be no stronger than it has been in the past
The look and feel of Parenthesis has improved and Large is satisfied
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR750, SUZUKI GSXR600
Is good
It is quite good for the price, I installed it in the GSXR-1000K4. This is enough because it does not ride for 2 people, Buffing is also hung and it looks pretty, the mounting hole is also Exactly, Recommendation. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Frankly Parenthesis is nice !!
Attached to ZrX 1100.
I purchased it because I wanted to Refreshing around Rear.
I think that it is a feeling that there is no personality in a common Bracket, I like this shape and it is purchase.
Although I did not have much difficulty in installation, the work went smoothly, but as it is, the Exhaust System and Shock interfere with each other, so I added Rubber Bush between and attached it.
It looks refreshing and I'm satisfied to see Rear shock well.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
If you mention the type of Exhaust System, one item without complaint.
I bought this Bracket because I took Rear m footpeg for better appearance.
It was Bracket more than I thought.
Bead of welding is beautiful in Large, you can see that you just made it well just by watching this.
The surface finish is also very beautiful.
By the way, the Exhaust System is BESS's Nasato R.
With this Type, Bolt-on does not interfere with Shock. (About 15 mm with room)
Because there is moderate none, I think that absorption of vibration is also good. If there is not a certain degree of bending, stress will build up in the bracket and the possibility that the material will break easily on Aluminum will be higher, so I think that it is a well thought form.
After that, although it is only durability, only this is unknown, since it is not understood if it does not run.
However, things are good.
View detail
Appearance Refreshing Surprisingly sturdy
I was worried about strength by saying Aluminum, but no particular problem.
OEMTandem Footpeg's Exhaust Bracket position and a little gap, but installation can be done without difficulty.
Basically it is satisfactory, but the price is a bit high, so four stars.
View detail
Beautifully fabricated, the fit is excellent, a nice addition to any Hayabusa. Highly recommended. Ideal, if like myself you don't carry a pillion and have no real use for the pillion footrests and brackets.
Beautifully fabricated, the fit is excellent, a nice addition to any Hayabusa. Highly recommended. Ideal, if like myself you don't carry a pillion and have no real use for the pillion footrests and brackets. View detail
Although hardness of the AGRAS was high and being carried out firmly, this product bends very well.Does a Silencer shake?Is it a problem of a sense of values there?
Although hardness of the AGRAS was high and being carried out firmly, this product bends very well.Does a Silencer shake?Is it a problem of a sense of values there? View detail
Only by processing and attachment which thinks it is beautiful and are good also for appearance removing and exchanging a NORMAL, the Screw of easy free attachment, I think that it will be perfect if the Silencer side excels even back 5 mm to
Only by processing and
attachment which thinks it is beautiful and are good also for appearance removing and exchanging a NORMAL, the Screw of easy
free attachment,
I think that it will be perfect if the Silencer side excels even back 5 mm to a slight degree -- as [ reach / although the Silencer band of the
Carbon band is used / with an attached Screw / a special Lock nut ]
View detail
Fits: HONDA VTR1000 SP2, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VTR1000 SP1
[Webike Monitor] It does not get used to mind of putting people on the Tandem seat of VTR1000SP-1/SP-2, and it will become disagreeable once a Passenger also rides. Since it was unavoidable to have attached in the Tandem step which is not used, it de
[Webike Monitor] It does not get used to mind of putting people on the Tandem seat of
VTR1000SP-1/SP-2, and it will become disagreeable once a Passenger also rides.
Since it was unavoidable to have attached in the Tandem step which is not used, it decided to remove.
Although the
vehicles become production stoppage and pass considerably, it is gratitude at the lady Bird [ in stock / as exclusive elegance / Bird / Muffler stay ].
I can decide on a Stylish by favor and think that it contributes also to the weight saving of vehicles.
The position of the
Stay does not correspond to the external Muffler of a Up type.
It corresponds to the external Muffler of a Down type (although not equipped by a Normal muffler, it is the position same probably as a Normal muffler).
In the case of
wearing, I consider [ having made it better / to blow hard rubber between a Silencer and a Muffler stay /, and ] for the prevention from damage by vibration.
View detail