Reviews
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
For weight reduction
I never tandem with RR-R, so I installed this one to save weight, and it is compatible with both Normal muffler and Slip-on Silencer. I installed Babyface racing hooks with it and had no problem. The quality of AXIS Lapo is the best. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Mounted on NORMALAXIS Lapo
I installed it on my OEM exhaust system because it was listed as "All CBRExhaust Systems" and I had no problem with fitting. The weight was reduced by about 160g. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R RR, KAWASAKI ZX-10R SE
WSBKStyle!
Purchased to bring 10R closer to SBKStyle, looks great.
In terms of weight, it is about 400g lighter.
The bracket itself is good, but the surface treatment of the attached Bolt is cheap and I am considering replacing it.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
For AXIS Labs fans....
The AXIS Labs Bracket was installed to match the OEM AXIS Labs Exhaust System, and if you don't need a tandem bracket, you should definitely install one. The price is a bit expensive, but it is a good deal. The price is a little bit expensive, but it is a reasonable price considering the fact that the installation is very easy since it is just a matter of replacing the OEM tandem footpeg. However, when removing the tandem footpeg, you will need to remove the tandem footpeg on the opposite side of the exhaust system, so you will need a racing hook and a blind cover separately. View detail
AKRAPOVICSilencer bracketKAWASAKI ZX-10RR
The shape is good
The Carbon one is more expensive and has the same shape as the NORMAL part.
I chose this one for its Design nature.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
It can be used for OEMExhaust System without any problem.
[How is it used?
The OEM Tandem Footpeg is removed and installed.
Was the one you received as per Image?
It's a simple Aluminum Bracket and it looks exactly like the Image.
Was the installation difficult?
It's very easy.
Just remove a total of 3 Bolts from the body side and the Silencer side.
It takes less than 10 minutes to replace.
How was your experience with it?
The OEM Silencer is also AKRAPOVIC, so I think it's Exactly the right product.
If you remove the Tandem Footpeg of Both Sides and replace it with this product, it will look quite Race ish.
It is a little bit lighter.
The Tandem Footpeg will be gone, so you will not be able to ride with two people.
[Included Parts:were they on?
All the necessary parts for replacement are included and even the screw lock agent is included.
[Was there anything that disappointed you?
Not disappointing, but a little pricey for what it is.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quintessential AKRAPOVIC!
This is the product of AXIS La! The OEM Exhaust System and the Parenthesis are perfect, but the price is too high … but it is one of the products that can satisfy the owner's feeling! 。 The installation does not require any special tools as it is just a replacement for the OEM Passenger FootpegBracket, but it does require a tool (star shaped) to tighten the bolt that stops the exhaust system, so you will need to check your tools before purchasing.
The Torque for the bracket is 27Nm, which is a very high Torque value, so make sure you put some effort into it. Just be careful not to lick the bolt, and make sure the tool is tight. If you are not sure, after tightening the bolt, you may want to use a mackie or marker to mark the bolt and clasp vertically to make sure the bolt is not loose. I hope it will be helpful for you.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Complete Bolt On
Perfect compatibility with the OEM AXIS La Exhaust System! I was able to install it without any trouble. …But you need Torx wrench because the Bolt is Torque (star shape), so you need to be careful. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Fits to Normal muffler
Exactly fits the AXIS Lab Bitch in NORMAL. Other company's products are expensive or the design is not so good.
It fits without a problem because it is the same manufacturer.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Replace the Exhaust Bracket.
The OEM Exhaust System for the CBR 1000RR-R is also AXIS La, so the Exhaust Bracket also has AXIS La logo on it, and it looks and feels very solid, and I like it a lot! View detail