Reviews
Used for Overhaul
It was used for Overhaul in conjunction with the disassembly of Silencer, which was suspect.
As described in the product description, the stinging when wrapping was kept to a minimum, and the work proceeded smoothly.
However, it is just hard to stick, but not totally impenetrable, so I think working quickly is HANG.
However, the work efficiency is a world of difference, so although it is a bit expensive, it is recommended.
View detail
The volume and sound quality is about what I imagined.
Used for SpenserMODEL by Mizuno Motor.
I used this product to take care of warming up first thing in the morning, but to be honest, I wanted it to be a little quieter.
There is some resignation because it is unavoidable due to the structure (^-^;)
Construction is at Beginner Level, Band for fixing (Needle Gold) The product also comes with a "M" and I think it is safe to buy it.
View detail
Toshi TECSilencer.
It fits Toshi TEC's Carbon silencer. The bore fits perfectly without any problem and without any need for fixing. I was able to restore the original quiet and light sound of the Titanium without any trouble since I could easily finish the prickling work just by trimming the length. Bean-jam-filled wafers in two pieces vertically (Monaka) The time and work required to push the material into the mold was reduced. The structure and material shape make it virtually impossible to push in the material. View detail
I was concerned about the volume and hadn't replaced it in a long time.
Used for Silencer of AfterMarket's Exhaust System that is being replaced.
Silencer Full Length (Cylinder part) Used for 470mm, Silencer outer diameter 110mm, Inner pipe outer diameter 54mm.
Quantity of this item:1 pc. Min (500mm×1100mm) The guideline for the amount to be used in the "Punching pipe 54mm, 120φSilencer" was the same as that for the Wool, but the Wool was able to fit without excess. The total length could also be fit without any problem by lightly pushing it in.
As described in the description, it is in the shape of a seat and easy to wrap around inner pipe. I worked with bare hands, as it says it is non-scattering, and it was easy to work with, with almost no stinging pain characteristic of glass wool.
If durability is not a problem, I would use this product again next time.
View detail
Acoustafil is easy to handle and great!
It doesn't tingle, it doesn't fly around, is it really Glass Wool?
It is so easy to handle that
I used protective Glasses, Mask and Vinyl gloves just in case, but I didn't need them!
However, when cut, fiber ends will come out, and if this happens, it is no different from regular Glass Wool. Be careful to cut as little as possible.
The price is much higher than other products, but the ease of handling is unmatched, so I think the cost performance is high.
I will definitely use Acoustafil again next time!
View detail
It was harder to put on than I expected.
I used to use the hand-wrapped type for the replacement Glass Wool, but I bought this one-piece molded type to try it out.
However, it does not fit well in the Silencer I have.
Something like Large.
I managed to attach it by peeling off one roll of the outside.
I guess it was bad luck....
View detail
It was as advertised.
The original was Steel wool and Glass Wool, but only Glass Wool was available for vehicle inspection.
The heat from the exhaust air caused it to expand, so we didn't have to be too careful with the wrapping method to muffle the sound, and there was no stinging after the work was done.
There is also a quantity for two times.
View detail
Used for external Muffler baffle
[How is it used?
External Exhaust SystemSlip-on Silencer was used because of its explosive sound.
Was the one you received as per Image?
BaffleExactlySize is not available, so it is processed and used
Was the installation difficult?
It was a little difficult because of the special Baffle shape.
How was your experience with it?
Volume dropped moderately.
[Included Parts:were they on?
With Wire for fixing
[Was there anything that disappointed you?
I wanted more Wire.
The excess was sealed with zip-lock to prevent shattering.
View detail
Purchased because I wanted to make the Exhaust System sound smaller.
I felt that the sound of the replaced Exhaust System was a little too Large, so I wrapped it around the inside Baffle.
The attached needle Gold felt short.
Perhaps the winding was not done properly, but the exhaust pressure caused the Glass Wool inside to pop out through a narrow gap in the Baffle's mounting.
Did I put the wrong front and back on? I thought so and put a new one on the opposite side, but the same thing happened.
Not enough windings? The sound did not drop that much, but the effect is not entirely absent.
I don't think there were any instructions on how to install it.
We'll see how it goes for now.
I haven't run 50 km since then, but the Glass Wool stopped coming out of the inside, so I looked inside and the Glass Wool is thinner than the amount that came out. (Lol)
It didn't seem to have much durability. (It could be because of the way I wind it.)
I have never used Glass Wool from other manufacturers, so I have no idea if this product is bad or if Glass Wool itself is like this, but I will try to use a different manufacturer's product next time I buy one.
View detail
Not as durable as I thought it would be.
Used in Silencer, an Other Brand Product.
It's a personal subjective view, but it gets torn apart rather quickly.
The Punching of Silencer was clogged in the part where it was not wound.
Probably the keba on the surface has been burned off and peeled off.
As for muffling, you can adjust it by the amount and area of the roll, if you're willing to go through the trouble.
Rose, wind up, run and check the volume repeatedly.
In the meantime, I was able to get rid of the uncomfortable muffled sound in Silencer with the perfect amount and roll.
If you want, Material.:I would like the Stainless Steel needle Gold to be longer.
View detail
Does it work somewhat?
When I tried to use an external exhaust system, I bought it to counteract the unexpected noise. I thought it became a little small, but it didn't run at all unless I wound it up well. I put it back on several times and it settled down in its own way. View detail
Well, that's about it.
I used it to replace Silencer's Glass Wool.
This item comes with Glass Wool and Steel Wool so it can be rolled in layers.
But because I put it on the Smallish Exhaust System, it was quite crispy.
It's like I was forced to push it in.
The volume felt spread out and cohesive.
It's a consumable product and needs to be replaced regularly.
View detail
Easy to use
I wrapped it around the external exhaust system when I replaced the Baffle
The volume is well controlled, but the rest is durability
The Stainless Steel Wire is also included and is very useful
View detail
4.0
When I changed Shaffle's Baffle, I used this product because it was an explosion. The effect was absolutely Large, and it turned into an elegant sound quality. If the attached needle gold is a little longer it is none to say. View detail
The dimensions are Exactly
MC18 / It fits Exactly to Silencer's Length of Dog Fire Exhaust Chamber of NSR 250R. Is it the effect of Steel wool? The sound felt dry. It is very nice there is no waste. I used Aluminum Tape without dare to use the included Stainless Steel Wire because I did not want to wear it tightly due to muffling effect for fixing. View detail
You can exchange easily without having to wrap it in Inner pipe.
55Φ×250mmQuantity : Quantity with 2 pc and 30 missing : 2pc. SetCut
Set to Inner pipe 280 mm.
Stainless Steel Wire is attached and fixed in 4 places
is.
Can be exchanged faster and easier than wrapped Type.
View detail
Useable.
MONKEY I installed the Exhaust System outside the place I got more than I expected volume, so in the Silencer Exhaust pipe Space in the back of the plugging part, rounded StainlessPunching metal Wrapped Steel wool, Glass Wool around the outside Stainless Steel Wire and fixed it.
Because it is dislike when it comes to resistance, Punching metal wound Large more than the inner diameter of Exhaust pipe.
The sound is suppressed throughout the whole area, plosive sounds in the middle and high speed areas that I was particularly concerned have disappeared considerably Large satisfaction.
Stainless's Steel wool is saved because it is not placed in the home center etc..
Although I do not know about durability yet, as I did with another vehicle type the same way before, I did not scatter more than 4000 km, probably Large durable?
I will check if the sound becomes loud.
View detail
It will silently sound
External system outside the company is a bit annoying, purchase for the purpose of muting.
Description and Material : Because the needle Gold of Stainless Steel is also attached, it is appreciated that it is easy to set.
The Glass Wool has a direction to set, so that the fiber surface is brought to the downstream side of the exhaust, and then the needle gold is wrapped and the work is finished.
Set exhaust sound, it is silently muted and I am very satisfied..
However, although I do not know how long aged deterioration is, since the price is very cheap, I think that it is unnecessary to worry much about deterioration condition after exchanging since it got worse.
View detail
Why not?
Purchase for winding on Baffle.
With needle gold, scattering is difficult, if you match the price with Large price pear.
When storing it in excess, let's keep it with Zip lock.
View detail
Used for MORIWAKI muffler
Buy Size because it is not quite long.
After all it was not enough capacity (Lol)
MORIWAKI's Exhaust System has a long cylinder. I thought about attaching it firmly This is Quantity : I need 2 sets. This time we made it alone in time, but it became quieter than I thought.
View detail