Reviews
T&F Wrap around Drag pipe
It has 5m compared to other peaches (4.5M is the most common) I can wind it up pretty good!
The fiber is of high quality and I handled it without gloves!
It looks GOOD!
View detail
Vantage
It's good in terms of feel, the exhaust pipe area was burned and dull in color, so it did a good job of hiding that. View detail
Fits: HARLEY-DAVIDSON Universal
The ideal finish.
The exhaust pipe has a high heat insulating effect which helps to prevent burns from the exhaust pipe. It takes some effort to wrap the pipe around the exhaust pipe, but it looks great on the American. View detail
It's itchy.
It's a copper color, but when heated, it becomes a shiny olive color with a blue tint.
This is so cool, it's Military chick.
If you want to roll it up nicely with a 25mm width, you'll have to roll it up pretty dense.
I wanted to cover the area from the bottom of the oil pan to the exhaust system, but it didn't seem to be enough even with 5M, so I didn't pile it up and rolled it up properly.
Even if it's a proper winding, it's effective enough to lightly touch the hem of the rain jacket right after the Engine is stopped.
View detail
Buy it if you don't want to roast your own feet.
Car models installed
This is a 2004 250SB
It is said to be 250SB, and the one who does not have a pin is considered to be Large and a half, so...
In a nutshell, it's a D Tracker with a SEA BASS Cowl
Purpose of purchase
I bought it to prevent my feet from getting roasted.
[Product Information]
1 meter per 1 pc of product sold, so if you want to buy 5 meters, you can buy Quantity:Buy 5pcs. and you will receive one Vantage of 5 meters.
【Impressions】
The smell of baked potatoes during the touring.
Just when I thought I was getting hungry or something, I saw White smoke coming from my Right foot!
Yes! The smell of a baked sweet potato is the smell of burnt pants on the Exhaust System! Ta!
If you're riding an off-road motorcycle or the exhaust pipe is in contact with the exhaust pipe, it's not a good idea. I think everyone who is in a position to do so has experienced this.
YOSHIMURAFull Exhaust System was originally installed on this car, so it is Heat Guard was also ironclad.
I thought that if I didn't, I would have the branding of Yoshimura on my right foot. Purchased at Meter.
There are some people who wrap it over the Heat Guard, but I took off the Heat Guard and wrapped it directly over the Heat Guard. I wound up.
The key points for installation are
Soak them in water before rolling them up.
Decide where you want to start winding and stop at the band first, then wind it up.
I'm going to curl it up while tightening it up.
Be sure to wear gloves when performing this work as your hands will get extremely itchy if you don't wear gloves.
And so on
When I rolled it up, the pants didn't get burnt, but the raincoat and the fiberglass ones that are weak to heat (Rucksack strings etc.) will still melt, so be careful.
View detail
I like it wide
I didn't have it in stock and it was only available in a narrower width, but I still preferred the wider width
There is a smell at the beginning of use, but the smell goes away after a while, so no problem
What are the benefits of doing this? But I'm doing it somewhat to protect the exhaust pipe
View detail
Easy to roll
At first I purchased it for MONKEY,
Because I wound a different Vantage, now I am wrapping around BW'S for the purpose of hiding rust.
It is easy to wind as much as the width is thin.
I do not know about performance,
Rust hid, and maybe a little bit like a mess.
BW 'S does not see much Exhaust pipe ? ? ?.
View detail
Fade quickly
Picking Black attracted by Cost performance.
With regard to installation, there is no problem as it can be confirmed on HP of GOODS.
Odor comes out until it gets familiar with color fading early..
View detail
Fall colors pretty quickly
I installed it in the SR 400.
How to wind is in Goods' Homepage.
I wound with bare hands, but as Glass fiber tingling, I recommend that you wear gloves and roll.
I fade pretty well just by running 15 km.
It is pretty smelly until it gets burnt..
View detail
Oh well, okay
I bought it last time in September 2016 and is installing it. Since it is a commuter rider, if it is rain or a typhoon of Small scale, it is a Motorcycle chronology. It will be replaced in about a year and a half, but taking into consideration the burn with the Left foot shank, I think that it is a mere compromise point. If you are cheaper 700 yen further, I will bid both hands.
I trust the Manufacturer called DAYTONA, and I also have the next opportunity (One and a half years later) I will probably like this product. I hope that it will be helpful for everyone.
In addition, although it is a mounting method, as you know, Liang Maintenance - P. I am using KITACOCrimp at both ends because I can not stand it. If it is the original 90th Rider, the needle Gold GRUGRU is the royal road, but it is opportunistic of preventing yourself burn injury rather than aiming for performance up by heat resistance of the Exhaust pipe part, so charming, nice sorrow. In the vocabulary understood by the understanding person (Snake feet (lol) )
View detail
1 m is short
I used it for the external exhaust system of CYGNUS1yp.
I do not know the extent of the effect, but I feel a sense of something.
At the beginning of use I have a strange smell. 1 m is short-lived so be careful, you need it.
View detail
Well, it's okay ... it's rolling!
SR400 (2003 year) As the Exhaust System of the Left soup is set as the Up Exhaust System, if the Exhaust System touches the calves of the Left feet it burns.
Thanks to that, hole has opened in Rain jacket too.
Even a little, I tried rolling to alleviate the heat! The durability is about 2 years, after that, I will decay and decay. I think that you can refer to the image with this product, you can use it twice.
View detail
It is more advantageous than other items!
Used for Conversion Adapter connecting Silencer and Exhaust pipe with different diameters.
Exhaust pipe and Conversion Adapter use welding, Silicon gasket, VantageClamp and this product.
Silencer and Conversion Adapter use Silicon gasket, VantageClamp.
Because there was a gap in the welding which was done cheaply by a neighboring welding shop,
The gap was filled with Silicon gasket and wrapped around this product and fixed with VantageClamp.
This product itself is easy to process and easy to deform after sticking softly.
Moreover, although this Size has double the amount of other products, the price is 1. 5 times or less. It is a good deal..
View detail
It is used, four months pass and it reports progress.Since it was a Gray color, it was worried about whether it becomes white someday, but most decoloring cannot be found, there is also no fray and it is likely to say durability.A burn is not carried out
It is used, four months pass and it reports progress.Since it was a Gray color, it was worried about whether it becomes white someday, but most decoloring cannot be found, there is also no fray and it is likely to say durability.A burn is not carried out although a guide peg may hit an Exhaust pipe, and there is heat.An engine-performance difference is ?.I think that I will purchase again by that which texture says. View detail
Fits: HARLEY-DAVIDSON Universal
It wound around the external Muffler of the Scooter.Although it soaked in water and was serious to the Wiring, it expects that a Pants does not melt in a success and this somehow.
It wound around the external Muffler of the Scooter.Although it soaked in water and was serious to the Wiring, it expects that a Pants does not melt in a success and this somehow. View detail
[Webike Monitor] In order to suppress the heat of the Muffler It purchased. Since it was burning beforehand and was carrying out, compared with the Type of an old Glass, smoke hardly came out, either but was good. If it quenches, i
[Webike Monitor] In order to suppress the heat of the
Muffler It purchased.
Since it was burning beforehand and was carrying out, compared with the Type of an old Glass, smoke hardly came out, either but was good.
If it quenches, it changes white and is beautiful.
There is also
thickness. It is recommended.
View detail
It purchased to Chamber volume attachment of RGVgamma. I think that it is suitably effective although the price is also carried out so so. It will become easy to wind if it is made to become wet with water lightly as it is in the manner of use.
It purchased to Chamber volume attachment of RGVgamma.
I think that it is suitably effective although the
price is also carried out so so.
It will become easy to wind if it is made to become wet with water lightly as it is in the
manner of use.
It is recommended also in the
effect and appearance.
View detail
[Webike Monitor] Since it had heat considerably when it was a Muffler of CT110, it wound. attachment removes a Muffler guard, and if the Hose bands of metal currently sold at a Home center etc. are prepared, it can attach it comfortably. Alt
[Webike Monitor] Since it had heat considerably when it was a Muffler of
CT110, it wound.
attachment removes a Muffler guard, and if the Hose bands of
metal currently sold at a Home center etc. are prepared, it can attach it comfortably.
Although it is hot that it is hot, the
effect is completely Massey rather than there is nothing in a volume.
since a Muffler
is lightly touchable also after running --
-- I think that it is a Level which is not carried out although it burns even if a leg hits for a while.
View detail
It is used for WR250X! Since the portion of the exhaust pipe was contacted and it sometimes often melted when the motorcycle cover was applied, it twisted around the portion and the portion beside suspension! Adiabatic efficiency is wonderful! Heat is eas
It is used for WR250X! Since the portion of the exhaust pipe was contacted and it sometimes often melted when the motorcycle cover was applied, it twisted around the portion and the portion beside suspension! Adiabatic efficiency is wonderful! Heat is eased very much.
It will be stopped very much that a right leg gets hot, if it is this summer also! In the case of attachment, since it will adhere to other portions or becomes and becomes dirty although it is good in making it become wet a little and twisting, it is attention. --- It seems to be useless that a hand describes directly again.
They are goods which can be used very much! They are four stars!
View detail
When the muffler of DR-Z400SM is exchanged for the full exhaust of a yoshimura, Since the crevice between it and the left radiator bottom was almost lost since the torque head pipe became thick also in the pure twist, a yoshimura was not double and th
When the muffler of DR-Z400SM is exchanged for the full exhaust of a yoshimura,
Since the crevice between it and the left radiator bottom was almost lost since the torque head pipe became thick also in the pure twist, a yoshimura was not double and the pipe became an elevated temperature more further while an authentic positive one was a double pipe, the heat burden applied to a radiator was considered and this product was attached.
Before there being no telling whether the summer where a burden is placed on a radiator has an effect however since it attaches in winter and there is also still no between, but rolling a thermoprotection lap,
I think that there is probably adiabatic efficiency to a radiator since a cooling fan did not turn to the last when the place thermoprotection lap which carried out empty revving up in a similar manner in the state where it wound, respectively was rolled.
Since the glass fiber was contained, it had written that it worked carrying out a glove, but the empty hand in particular was also satisfactory.
After making it become wet with water lightly, it winds strongly, but a color moves to a hand and it becomes black.
Dirt comes off simply by washing in cold water.
Since a thing like the cable tie which winds with a cut water and stops the end, or wire is not enclosed, it is necessary to prepare it for according to.
View detail