Reviews
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Fixed
It is used for the Flange fixing part of the Chamber.
It swivels so the Hook angle at the time of installation seems to be a good hook for it.
Rubber, Silicon transparent mounting looks good.
View detail
Exhaust System Fixing
It looks Silver and beautiful, but I feel that the Black of Rubber does not suit me personally, so I plan to replace it with a transparent one.
This one looks better.
View detail
Spring
The swiveling design allows for installation without worrying about the angle at which it is mounted. Since it is silver in color, the silicon transparency seems to fit better than RubberBlack. View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel
The rust-resistant stainless steel and silver color make the transparent silicon rubber attachment look not so bad.
It can be installed with a good feeling without straining because of the double-swing swing.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel Spring
I think the black of Rubber does not match the silver of Stainless Steel, but it seemed to take a long time to order the one without Rubber, so I bought this one anyway because it was in stock and the delivery time was fast. I bought this one because it was in stock and the delivery time was fast. View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel
I would have liked to have gotten the one without rubber, but it seemed to take a long time to order, so I bought this one with rubber, which was in stock.
Stainless Steel, swiveling, and this length seems to be a good length for use.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel Spring
Used to fix Exhaust System.
The Black Cushion has a poor balance in appearance, so I replaced it with a transparent one.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel Spring
It is purchased for use in Flange fixing of Chamber.
I thought it should be rust-resistant, and this Stainless Steel Spring seemed to be a good length, so I purchased it.
It does not look bad and seems to be well fixed.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Spring
I am repurchasing to use for Spring for Flange fixation in Chamber.
It is a single-neck swing, so it seems to pull at a good angle overflowing. Black is not bad looking, but it is not completely black. There are some areas where the color is light.
Is it easy to rust since it is steel? I would like to see how it looks for a while.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
ChamberFlange Fixed
I purchased this product because it looked like it would have a good one-sided swivel for use in the ChamberFlange section.
The one without rubber was a little cheaper, and the one with rubber had a slanted cut edge, so I plan to use another rubber.
When pulling on the installation, it seems to be better to use a single swivel.
View detail
Flange Fixing
I am repurchasing to use for ChamberFlange.
It swivels, Black so it doesn't look bad, and the Hook on the Free one has some parts that are not colored.
It's not a pricey item, so it's not a bad idea. The color may peel off as it is pulled during installation, but for now, it is repaired and installed with Touch pan.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
MORIWAKI OEM Product
MORIWAKI LEGENDMONSTER S2Bean-jam-filled wafers (Monaka) The Spring that came with the product was replaced due to a broken Spring.
The length was optimal and the connection was secure.
I bought several bottles as spares and put them under Seat.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Fixed Chamber
It is used for fixing ChamberFlange.
I used to use Spring from other sales, but this one has more freedom with one side of the head swing, and it works better as a Spring fixture.
It is hard to tell from the picture, but the black color seems lighter than other companies' products. I am a little worried about the rust.
View detail
ChamberFlange Fixed
The Spring of the Flange fixing part of the Chamber section was old and had some play, so I wanted a slightly shorter Type. I was able to fix it with a little pull, and there was no problem in terms of diameter and length, and I was able to use it with a nice one-sided swivel.
The cut was a little short, and the cut end was slanted and did not look good.
View detail
Measure the length carefully.
[How is it used?
When I changed the silencer of YAMAHA XJR400R from MotoGEARΦ100 to K2tecΦ86, the original spring was too long to fix the exhaust pipe and silencer.
So I thought that around 65mm to 75mm would not be a problem and purchased this product.
Was the one you received as per Image?
It was as shown in the Image, but it was surprisingly short... However, I thought that Spring should be stretchable, so I installed it, but it was not surprisingly stretchable.
I was in a tight-fitting state.
How was your experience with it?
I put it on, but it was so tight that it looked like it was about to snap, so I stopped using it...
I think the product is well made and good.
[Points to note]
Everyone should measure the length carefully before purchasing.
View detail
Exquisite thickness and length is Point
Exhaust Spring is Large 80mm, 85mm, 90mm or 5mm increments.
It pulls pretty hard and often doesn't stick if there is a 5mm difference.
If it's too short, it won't grow even if you try, and if it does, it's pretty dangerously tight.
If it's too long, the exhaust pipe will move and shank, and soon it will fly off somewhere and disappear….
The length of MORIWAKI Spring is 87mm, and the point is that the length is exquisite.
Moreover, since it has a winding diameter of 9mm, it is hard when pulled, and it doesn't stretch and not return like cheap products.
Above all, Parenthesis is good in Slim.
The tube is thin and parenthesis is good. used in YOSHIMURA.
It is similar to Tube.
If you are not sure whether to buy 85mm or 90mm, buy MORIWAKI's 87mm.
I can recommend it because it is inexpensive.
There is only one drawback. It is easy to rust.
The Left Side in the picture is made by MORIWAKI, but without the Motorcycle Cover, it will rust like this in 2 to 3 years.
(The Right is a DRC product that I added in a hurry, but you can see the difference in thickness, product texture, and shape.
(DRC just looks like a pulled Spring, a bit cheesy)
It just rusts but has never broken. I've used many of these and only one has lost Spring strength and stretched out.
I have, but rarely.
The only thing I can't help is rust, but I was wondering if the manufacturer can change the plating or something.
I think
View detail
Generally good.
Purchased to adjust shipping costs.
The original Spring is badly rusted and I want to revive its appearance.
MORIWAKIOEM, so you do not have to worry about the length.
After the exchange, I am self satisfied.
View detail
Because it is MORIWAKIOEM Product, it can be relieved.
MORIWAKI muffler purchased it because I was concerned about rust occurred in the Spring part.
When purchasing Spring as Single Item from Manufacturer MORIWAKI, shipping fee Gold will be charged in addition to merchandise cost Gold.
Because shipping fee Gold is unworthy, we purchased Wee Big.
(Since it becomes over 3000 yen as soon as purchasing along with the Small things relationship, it was free shipping. )
Spring is rising little by little from the beginning of the Exhaust System purchase.
The quality aspect of Spring is rusted as the material is iron because it is iron, but if it is ReplicaMotorcycle, I think that it will not be seen with Cow even if it rusts.
Because it has a resonance prevention Rubber cover, it can prevent abnormal noise.
View detail
Existing Spring corroded and it got rusted and replaced
Although I got a second-hand external exhaust system, since all the Springs were rusted, I bought it as a replacement part. Because outside company Exhaust System was MORIWAKIZERO, I also wanted to unify Brand. View detail
Black Spring
I am cool with whole body Black. Because there was no Black Spring except for it, it is recommended for those who adhere to the color of details. I failed because I thought I would divert it as Brake's return spring ... View detail