Reviews
Reliable OEM Product
I wanted something short in terms of length, but YOSHIMURAOEM had just the right length, so I bought it.
The Yoshimura logo is also on the anti-vibration rubber, which is highly satisfactory.
However, it is more expensive than other Springs. Quality is very good.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Spring
I am repurchasing to use for Spring for Flange fixation in Chamber.
It is a single-neck swing, so it seems to pull at a good angle overflowing. Black is not bad looking, but it is not completely black. There are some areas where the color is light.
Is it easy to rust since it is steel? I would like to see how it looks for a while.
View detail
Decent Exhaust Spring
Used for external exhaust system of GSX1300R GSX1300R HAYABUSA
When the exhaust system was replaced with an external exhaust system, the chatter sound of the Gold genus became more loud when the RPM was raised, so it was introduced as a countermeasure against resonance/interference noise.
This product is a type of spring whose Hook rotates freely, just like the springs that come standard with AKRAPOVIC and YOSHIMURA.
It also comes with a Rubber for sound control.
(Although it is shiny and the texture is not so good.)
It seems to have good heat resistance for normal use, but if it is pressed against Cowl or other parts and directly hits the exhaust pipe, it will melt, so care is required.
The spring itself is SUS with a relatively large wire diameter, so it can be tensioned firmly and is rust-resistant and solid.
The Spring is generally as it looks, but one thing to note is the installation length.
Size100mm" means the free length is 100mm.
Note that Tension is not applied unless it is used with some extension.
As per Q&A, it seems that the mounting length is intended to be 120mm.
I tried to install it, but it was a little loose, so I went with the company's M size. (85mm) I bought a new one.
Neck would be the price.
I understand that it is a solid product, but it is a little expensive.
A 4-cylinder Full Exhaust System uses more than 10 springs depending on the type, so the spring alone will cost more than 10,000 yen.
It's a little tough, as you'd expect.
However, the product is solid, and from a quick search, it seems that this size cannot be diverted from AKRAPOVIC or YOSHIMURA's Repair products, so it would be the best solution for those who seek quality over cost.
View detail
No comparison with fake
Quality and Texture Information Yoshimura Quality is Good It keeps the muffler right for the feeling of use Products to buy together yoshimura muffler Installation Difficulty Spring Tool is available Cost performance and comparison with other products Good for Yoshimura muffler WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you can replace it with a good product, it is okay to use another product, but it will suit Yoshimura muffler View detail
Black color is good
[How is it used?
Spring at the middle pipe joint of Demon150GR external exhaust system was replaced because it started to rust.
Was the one you received as per Image?
2Quantity of Anti-Vibration Rubber on Black Spring:Set。
As per Image.
No Instruction Manualetc. as shown in the photo.
Measured the length and used one that just fit the mounting length of 100mm.
Was the installation difficult?
The only difficulty I had was attaching the Anti-Vibration Rubber to the Spring.
If you have the proper spring hooks, mounting on the car body itself is as simple as hooking the One Side, pulling it, and applying the tension.
I have LargeSmall3Type Spring hooks available based on my past experience fighting various Springs lol.
The Spring hook is used only occasionally, but it is a good thing to have.
My latest favorite is Tone's Spring hook [TSH-165]
How was your experience with it?
I was worried that the anti-vibration rubber would melt because it was in contact with the exhaust pipe, but I checked it after driving and found that it seemed to be large and strong, so I decided to see how it would look.
Since the original SilverSpring has been replaced with a black surface finish, we expect that it will be more resistant to rust!
Above all, it looks Fashion.
When running on previous Spring as well, Beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!" I was hearing a contact sound with the RPM, but now that I have this Spring, is the sound muffled by the Rubber? Gwynn." changed to a The volume is about the same. It may be a little quieter … about the same. The contact is within my expectation as it is a self-inflicted disease from the original.
View detail
A little stiff.
It is used as Chamber spring with a mounting length of 95mm.
Before this product. MORIWAKI ENGINEERING MORIWAKIEngineerRing:0A02-08709KK11[Exhaust System Replacement Parts] Spring Long I used to use a 1 pc but it came off and went somewhere else, so I bought it.
It was stiffer than MORIWAKI's Spring and could be installed with firm tension.
To compare the hardness, MORIWAKI can be pulled with one hand, but this Spring is a little tougher with one hand.
It is a well-made and good product, but it seems to take a little time for delivery because it is an imported product.
View detail
Silencer and Joint
It has been 6 years since the last replacement and the Exhaust System was replaced while painting the Exhaust System.:I think Stainless Steel ones are good. I am not sure if it is effective in preventing rust, but I use it with silicon spray. View detail
Exquisite thickness and length is Point
Exhaust Spring is Large 80mm, 85mm, 90mm or 5mm increments.
It pulls pretty hard and often doesn't stick if there is a 5mm difference.
If it's too short, it won't grow even if you try, and if it does, it's pretty dangerously tight.
If it's too long, the exhaust pipe will move and shank, and soon it will fly off somewhere and disappear….
The length of MORIWAKI Spring is 87mm, and the point is that the length is exquisite.
Moreover, since it has a winding diameter of 9mm, it is hard when pulled, and it doesn't stretch and not return like cheap products.
Above all, Parenthesis is good in Slim.
The tube is thin and parenthesis is good. used in YOSHIMURA.
It is similar to Tube.
If you are not sure whether to buy 85mm or 90mm, buy MORIWAKI's 87mm.
I can recommend it because it is inexpensive.
There is only one drawback. It is easy to rust.
The Left Side in the picture is made by MORIWAKI, but without the Motorcycle Cover, it will rust like this in 2 to 3 years.
(The Right is a DRC product that I added in a hurry, but you can see the difference in thickness, product texture, and shape.
(DRC just looks like a pulled Spring, a bit cheesy)
It just rusts but has never broken. I've used many of these and only one has lost Spring strength and stretched out.
I have, but rarely.
The only thing I can't help is rust, but I was wondering if the manufacturer can change the plating or something.
I think
View detail
Stainless Steel Spring
I bought it last time and installed it, but on this touring one of the Springs was missing. I've been pulling on it a lot, so I can't imagine it coming off, so did it break? I hope it will not go missing this time. View detail
Is the Anti-Vibration Rubber too short?
[How is it used?
I had to replace the Spring at the exhaust pipe connection because it corroded heavily after stepping on a salt cull last winter.
The last time I replaced it was in June 2017. I was still concerned about corrosion so I replaced it.
So far, I've been using the bare Spring, but this time I'm trying the Spring with Anti-Vibration Rubber.
I sprayed it with AZ's quick drying silicone spray to make it easier to cover the rubber and to prevent rust.
Assembly part 4pcs, Center pipe and Exhaust System part Quantity:I need 2pc, Exhaust System part Quantity:The 2pc was not workable and was abandoned.
The first step is to replace the four assembly parts.
How was your experience with it?
I think it's good that I no longer hear the Spring sound when I hit something with Maintenance.
How did it compare to other products?
I don't know the products of other companies. I am sorry.
[Points to note]
LargeIn the past, I was able to detach it by pinching it with a radio pen, but it is still convenient to have a tool. I use a hook type pick tool.
I think the Anti-Vibration Rubber is too short, it's a Rubber hose so I should buy it separately and fit it to the right length.
Other items that would be helpful
Presence of Included Parts:/・・・3Quantity:I've purchased a Set, of which Quantity:1 Set comes with 1 pc of Anti-Vibration Rubber as an extra.
View detail
Very good quality.
The stainless steel material is very strong and resistant to rust, so it will stay clean forever. View detail
Firm Spring force.
The spring is very firm and connects the joints of the exhaust pipe, it is convenient to use for repair and the price is cheap and the quality is good. View detail
To prevent squeaking
I was looking for a replacement for the exhaust spring because of the rattling noise and this product came to my attention.:1 Set of 10pcs. is enough for you to stock if you have extra. The heat resistant rubber will reduce the vibration and rusting sound. View detail
for Replacement
This is a purchase for replacement of ChamberFlange part.
Quantity:1 Set of 2pcs. for a great deal?
The cut of the Rubber tube was beautiful on this purchase as well.
What was the slant and bad look the first time, when I bought it…
View detail
for Replacement
This is a purchase for Replacement.
I was wondering if it would be more economical to purchase the Spring and Anti-Vibration Lara Bar set. This time, the cut end of the rubber is straight, and I wonder if the previous purchase was strange.
View detail
I bought it because the Spring that came with the Chamber flew away.
The Spring to prevent the Silencer from falling off that came with the Chamber flew off, so I bought a Spring with Anti-Vibration with Rubber.
When I put the Rubber on the Spring, it was a little Large strange because it was quite tight.
So far, I'm happy to say that they've stayed on without coming off properly.
View detail
For maintenance.
It is purchased as a maintenance part for the Exhaust System fixed part.
The shape of the rubber cushion part where the spring hook part rotates is not oblique compared to the other ones, and it is good because it is beautifully cut.
At 1pc. it's a bit expensive, though, since it's this price.
View detail
Okay.
It is a purchase for Spare, for Replacement.
The shape and length are different from the original one, but no one seems to be the same.
The cut end of Rubber is a bit slanted, although I personally prefer it straight.
The original doesn't seem to be that clean either, so I thought it was good.
View detail
Expectation of lifetime
We are on the 90th year GSX-R1100 but since Spring was out, I purchased it, but Size was supposed to have matched but it was not before.
View detail
Because it is MORIWAKIOEM Product, it can be relieved.
MORIWAKI muffler purchased it because I was concerned about rust occurred in the Spring part.
When purchasing Spring as Single Item from Manufacturer MORIWAKI, shipping fee Gold will be charged in addition to merchandise cost Gold.
Because shipping fee Gold is unworthy, we purchased Wee Big.
(Since it becomes over 3000 yen as soon as purchasing along with the Small things relationship, it was free shipping. )
Spring is rising little by little from the beginning of the Exhaust System purchase.
The quality aspect of Spring is rusted as the material is iron because it is iron, but if it is ReplicaMotorcycle, I think that it will not be seen with Cow even if it rusts.
Because it has a resonance prevention Rubber cover, it can prevent abnormal noise.
View detail