Reviews
Itchy Items
Due to a worsening cervical hernia, I was unable to ride a motorcycle for about a year and had to dispose of all my motorcycles and equipment except for a scooter for commuting. However, thanks to hellish training and treatment, I have finally recovered to a certain extent. My wife gave me a 1997 klx250es as a present.
It was a good used car that had been used for a while, but the promised OEM exhaust pipe heat guard was completely lost from the welding point where it was fixed, a Kawasaki phenomenon. Of course, I bought it together with the OEM heat guard from Webig.
It is good. Thanks to Manufacturer's attitude to sell such Pinpoint Parts at a low price.
View detail
Universal and high quality
To make the 2007 WR250X a Course-only vehicle, we equipped it with the North American OEM GYTRExhaust system and DeltaTorque head pipe.
I chose this one to fit the DeltaTorque head pipe with the WR250XOEMHeat Guard.
It is cheap and high quality.
View detail
Perfect for DeltaTorqueHead
I used DeltaTorque head pipe and usYOSHIMURARS2 on my WR250X. I was worried about the heat of the exhaust pipe, so I chose this pipe for protection. Thanks to this, both zCarbon's Heat Guard and WR250X OEM Exhaust Pipe Guard can be installed.
Our 2007 WR250X will soon have its exhaust changed to Large width! (Now with YOSHIMURARS4J and OEM Exhaust pipe) I'll do it. (Combination of North American OEM GYTRSilencer and DeltaTorque head pipe) I would like to buy another one.
View detail
Perfection as shown in the image
To install the DRC Exhaust Pipe Guard4Cycle to the RSV's 4 Strike Competition Exhaust Pipe (exhaust pipe), this Mount Kit has been purchased by Quantity:I used 2 sets.
important item
[Was there anything that disappointed you?
There was nothing in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
Couldn't it be a little cheaper?
[Do you have any products to compare it to?
We have not found any other similar products.
Frequently Asked Items
What made you decide to buy?
There is a method of attaching the Guard directly to the exhaust pipe, but the exhaust heat is transmitted to the Guard and it does not serve the purpose of heat shielding.
How was your experience with it?
As I intended, the exhaust heat from the exhaust pipe is not transferred to the Guard, so it is now hot enough that you can touch the Guard with your bare hands without getting burned.
Was the installation difficult?
Technically, there is nothing difficult to do, but because the clearance between the engine cylinder and the exhaust pipe is narrow, I had to use my head to decide the position of the band and the direction of the screw to attach the mount to the exhaust pipe.
【Please tell me the installation point and hang】
Guard is Material:Because it is aluminum, it can be bent to some extent, but extreme bending is not possible, so it is necessary to decide the position of the Mount so that the Guard will fit the shape of the exhaust pipe well.
[Was the Instruction Manual easy to understand?
The instruction manual is not included, which makes it even more important to have the proper knowledge, skills and tools is required
[Included Parts:were they on?
This is the only item in the photo, there were no other included parts.
View detail
High Quality Universal Product
What made you decide to buy?
The welded Heat GuardMounting Bracket on the One Side was broken and the So I was rummaging around for usable parts
I wanted to use the OEM Heat Guard, so the only thing I wanted to use was the Mounting Bracket It was the product I wanted
How was your experience with it?
Easily repositioned and the Heat GuardBody hides the brackets, so you can easily change the position of the It looks good
Was the installation difficult?
All you need is a 1 pc slotted screwdriver and it's easy to install
[Others]
I only used One Side this time, because the Button head bolt looks great Bolt is Quantity:2pc. Set used
[Was there anything that disappointed you?
None
Do you have any wishes or improvements you would like to make for the Manufacturer?
It would be nice to have a few different colors of Blacketc
It is also fine to sell by the unit of 1pc
[Do you have any products to compare it to?
It's not a comparison of the product itself, but it's a comparison of gluing the Bracket to the Exhaust System Heat resistant Bond
View detail
Used for Repair of DRCHeat protector
It is used for Repair of DRCHeat protector
I purchased this because the base part of Heat protector was broken by vibration
The price is a bit high, but I'm happy with it
It would be nice if they could do a Single Body sale with just Base, but if Base folds I also changed the Band at the same time
View detail
I used it to install the OEM Heat Guard
When exhaust pipe was exchanged for BEAMS Head pipe, it was used to install OEM's Heat Guard.
Because it is Set 2 formula of Stainless Steel Band and BaseGold tool, I feel a little high, but Merit which can install OEMHeat Guard without machining is Large, I am satisfied.
Incidentally, "No processing" Although it was, Band is long, so I think about 5 cm cutting considering the appearance.
Also, when installing the OEM Heat Guard, a thin Gasket is used at the junction with the Exhaust pipe. Since this can not be reused if it is years old Motorcycle, I think that one who is worried should prepare OEMParts in advance.
View detail
It is expensive ('? Ω `?)
DR-Z400SM bought this and bought it because PipeGuard is not attached, but I can understand that it is not a thing suitable for a price.
I thought it was somewhat ... but thoughtfully.
Quantity : 2pc. I wonder if it takes 10 minutes to stop Set.
It's just a matter of turning Screw.
View detail
It is in play [ in D-TRACKER 125 ]. It is used in order to attach a pure Heat guard to the Torque head pipe of DELTA. Although it was 32g per piece, the Band surplus since the Pipe was thin in the case of the D tiger 125 was cut, and it was set
It is in play [ in D-TRACKER 125 ].
It is used in order to attach a pure Heat guard to the Torque head pipe of
DELTA.
Although it was 32g per piece, the Band surplus since the Pipe was thin in the case of the D tiger 125 was cut, and it was set to 31 g.
I think that structure of the
pedestal part and a Bolt is good.
The
band part is very common.
View detail
He thought that he would equip an external exhaust pipe without a heat guard's stay with a pure heat guard, and it purchased. It was able to use, although purchased [ whether since the picture of goods was not found, it can use, and ] by BAKUCHI.
He thought that he would equip an external exhaust pipe without a heat guard's stay with a pure heat guard, and it purchased.
It was able to use, although purchased [ whether since the picture of goods was not found, it can use, and ] by BAKUCHI.
A photograph is contributed so that it may become helpful in the direction which will consider purchase from now on.
Since the die length of a band is lacking when starting to the portion which is thick [ an FMF power bomb ], it is necessary to prepare a long thing separately.
View detail