Reviews
Exhaust SystemExhaust pipes that may be touched.
I bought this to prevent my heel from hitting the Exhaust pipe part of the Exhaust System. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Not suitable for painting.
In a completely unnecessary place as a Heat Guard.
It is installed at One point.
On Material, even if the contractor scratches the material considerably, the groove is not so good.
The paint was crystalline and did not shrink.
I don't think it's the right choice; it's been in use for about two years.
I also managed to get a crystal coating that didn't shrink.
It is starting to peel.
View detail
Prevent the Body Cover from melting in the heat & standing up!
If you don't have this, you can't put on the Body Cover until you get home from touring for more than an hour!
A must have! The design is cool without being obnoxious.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
The over racing / 2-1 stuck to yamaha dsc400 Slash muffler It was exactly at the size. however, since it came out to a slight degree in respect of the heatproof and carried out, the heat resistance sheet was inserted under the muffler guard.
The over racing / 2-1 stuck to yamaha dsc400 Slash muffler It was exactly at the size.
however, since it came out to a slight degree in respect of the heatproof and carried out, the heat resistance sheet was inserted under the muffler guard.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Fallen cannibals
[How is it used?
It's been 9 months since I bought my FZS600, and although I haven't had any standing fender benders yet, I'm taking precautions to prepare for that eventuality. After all, it is a 19-year-old motorcycle, and Silencer is no longer manufactured and out of stock.
Was the one you received as per Image?
I thought it would be a bit larger than I expected, but when I tried it on Silencer, it seemed to be a reasonable large size. It is supposed to be used as a heat guard, but I think it is a little too large for that.
Was the installation difficult?
Attaching it to Silencer is technically less difficult, but the Stainless Steel Band is too long, so it would be Large strange if you don't have the right tool to cut it. I had a wire cutter (a large nipper), so I could easily cut the band with it. Incidentally, the Silencer of FZS600 has a diameter of 120mm, but the Stainless Steel Band is still 5mm long. I had about 0mm left over.
How was your experience with it?
I decided on the mounting position based on where it would be damaged in the event of moss, but I'm not sure if it will work as expected.
[Included Parts:were they on?
A complete set of parts necessary for installation is included as shown in the product photo.
[Was there anything that disappointed you?
I won't know if it works as well as I hope until I actually mock it up, but I hope it doesn't! (Lol)
Other items that would be helpful
Installation point or hang:Tightening the screws of the Stainless Steel Band should be done last; temporarily fasten the Stainless Steel Band and Guard Mount to the Silencer, and then screw the Heat Guard to the Mount. After fixing and positioning the Heat Guard, tighten the screws of the Stainless Steel Band last. If the mounting position of the Stainless Steel Band and Mount is determined first, it will be difficult to position the Heat Guard horizontally.
View detail
spontaneity
It's not a bad idea to have a large size for a large number of people. View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Heat Guard (because it's a small exhaust system) which can kill two birds with one stone
I installed it on the YoshimuraExhaust System Up Type which was changed by MONKEY125.
I've replaced the Exhaust System.
When stopping:lower your foot and your inner thigh hits Silencer.
When driving:When you kneel, your knee grip hits the exhaust pipe.
So I was having trouble using it on a daily basis.
YOSHIMURA's Exhaust Pipe Guard cannot guard Silencer part.
However, adding the Guard to Silencer is not a good idea because of its cost and appearance.
While I was looking at the Heat Guard of each company, I was wondering what to do.
You can slip it on.
I realized that this was the case.
As you can see in the resultant photos, it protects my feet when I stop and drive.
It's sturdy and sturdy because it's supported at two points by a wide band and doesn't freak out when you tighten your knee grip with your shins.
Moreover, I think that it is functionally superior to other products because the protective Seat to Silencer side is attached as shown in the product photograph.
Just one point.
The Silencer portion is approximately φ90-95 [mm] And since it is thin, the included Band was too much for the Large amount to fit.
I couldn't cut the Stainless Steel Band to protect the end faces with my handheld tools, so I had to use
Separateφ100 [mm] I bought a Band of (extra 3 [cm] (The degree is to the inside of Heat Guard).
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
We protect Side bag from Exhaust System
Saddlebag of Enduris Tan purchased for Silencer because it has partially melted.
Originally, Silencer heat guard was attached, but the length was only 12 cm, and in the forest road Saddlebag gradually moved and hit the Silencer. Although I have not yet gone to the forest road after attaching this Guard, it is probably Large enough to cover the entire Silencer, so I think probably Large is durable.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
I am using it with Heat Insulating Material.
It attached to the Exhaust pipe by preventing melting of Bike Cover.
Band seems to hurt Exhaust pipe
We have installed a Heat Insulating Material.
Heat that gets in the Guard was to the touch with the hand.
I think that using Heat Insulating Material is more effective.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
DAYTONA Silencer Heat Guard
This DAYTONA Silencer Heat Guard is the product that I looking for. Because it can use as Heat Guard and also use to protect exhaust when motorcycle sliders on the side of the bike. My exhaust is Yoshimura R-77. Although this exhaust not circular but it can fit well. View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
VTR 250 OEM Exhaust System to prevent burning
As the hem of the ride IngPants has melted by the heat of the Exhaust System, purchase as a measure.
As ordinary as shown in the photo, but it is not Visual White in the face so I stroked the Carbon Seat like a photo on the table. As the backing as shown in the picture? Put on the AluminumSeal for the kitchen for the purpose of preventing adhesion and peeling of the dirt at the Slit part. The state of the photograph? Which confirmed the positional relation and made this book. I am satisfied because the appearance is getting better and the function is also good.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Design is anxious, but the effect is certain
I bought a hole in Waterproof Bag and I purchased it surely that I will not physically touch it rather than struggling to suspend Bag. I felt like I installed a suitable iron plate purchased at Home center from color and shape, so I painted it with Black's heat resistant paint.
Because of the test, it was high speed, we felt that it was getting warmer in the place I touched after I ran about 30 minutes on one way along the way down, there was never a hole to open. It may be different when running for a few hours, but for the moment I feel that it seems likely that it will not become too nervous to touch the exhaust system of Side bag.
Installation is troublesome. It is good to preliminarily loosen the Heat Guard and the mounting band temporarily and attach them to the Exhaust System and align the protection seats and the Band while tightening the Band.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Easy installation
I changed to OEM's second-hand Exhaust System in certain Oaksu, but I bought it because Guard was removed for some reason.
It was better that you could easily install it because it was better than not being there.
I thought that it would be a bit cheaper.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Reduced waste heat
Slip-on Silencer of WR'S arrived from the beginning to GSR 250 I bought. It is lighter than OEMExhaust System and I like it coolly, but when the inside of the Right foot touches the Exhaust pipe part, Over Pants often melted (Photo Quantity : 1 Set of 4pcs. eye). As a result, Over Pants was melted in the Exhaust pipe section, and the appearance also became worse.
This item has protrusions on the inside (Photo 1st piece) , Because there is a space to be formed with Exhaust pipe, waste heat has drastically decreased compared to before. It is Level which you can touch with bare hands.
In my case, the installation site interferes with Spring because it is the connecting part of Exhaust pipe and Silencer. So it took a while to install LOL
Installation was Large strange but effect - I am satisfied with both appearance and Large. I could hide the traces made in the Exhaust pipe, and it is not hot anything! It is no longer melting Pants.
View detail
DAYTONA:Exhaust Guard Wire Type
Exchange MONKEY Silencer for DAYTONAUp Exhaust System, purchase this product because there is no Heat Guard of Exhaust pipe.
Adaptive Pipe diameter is too large, so 1 inside fixed base. Mounting with 5? Thick Aluminum plate in between. Aluminum spacer making was the most loud strange.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Burn It is escaping from hell! Because it has Punch, it looks nice too
Today's wearing! Slash cut wrapped heat-resistant Vantage, but it looks bad Quantity : 2pc. Set attached to each. He insulated it firmly. Use in conjunction with Vantage is effective. I think that it is hot without touching Vantage. It is made with DAYTONA and it is safe and because it is Stainless Steel, I do not mind rust and I think it is a good product.
I also decided to look neatly. The price is also convincing.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
I got a chimera!
I regularly consciously ride the heel on the tip of the Pedal, but since heels really hit the Exhaust System at the time of Breaking, I searched Guard and made it for DAYTONA made this.
Because it is Punching it probably that heat dissipation is good ....
Because the Band was a bit long, we measured the dimensions and cut it carefully.
Even if the heel hit the Exhaust System it is Large durable!
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
It has good appearance and heat resistance.
I bought it for the purpose of hiding and decorating Exhaust System and preventing melting of Bike Cover.
Installation was a little troublesome work of passing Bolt through Nut and winding a band on protective Seat.
Although it is heat resistant, I tried Bike Cover immediately after running a long distance, but Cover did not melt.
Although it does not guarantee reliable heat resistance, I thought that the reliability is high unless it is an Exhaust System with a little calorific value.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Can be attached to irregularly shaped Silencer
I bought it before I can finish it because I improve standing gore.
Since it is not attached after it is installed, the effect is unknown.
The shape of Silencer was triangular but not circular, but it could be installed.
I think that it is good for people with baggage because it is warm place even after touching.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Exhaust Guard
Purchase to release from the burning hell of Rear bank Exhaust System of V-type 2 cylinder Engine.
At first, we have wrapped heat-resistant Vantage on Rear bank Exhaust System, but because it looks bad as it is, we installed this item from above Vantage.
The result was very good looking and also attached, so it is very satisfying to be released from the heat of the Exhaust System.
In addition, this product Material : Because it is Stainless Steel, there is not worry of rusting. (Plating is cheap, but it rusts with aging)
View detail