Reviews
Exhaust pipe stepping stone injury prevention
I installed this Guard as a measure to prevent mud stains and scratches from stepping stones on the exhaust pipe. I am satisfied with the workability and cost performance of the Guard.
The only complaint is that the paint color of the Guard adheres to the exhaust pipe. Although I have some dissatisfaction with the product, I am satisfied that I have achieved my goal.
View detail
Used to replace Exhaust System of CRF125F
We have replaced the Exhaust System of CRF125F with DELTA products.
Installed; NORMAL Guard will not work.
Therefore, we installed the same product as recommended by the manufacturer? The same product recommended by the manufacturer was installed.
Exchange is Quantity:It is easy as it only requires 2pc Bolt and Band.
I thought 15 minutes would be enough time to work on it.
It is also effective in blocking exhaust heat and idles for a while.
After turning the Engine with Ring, put on the Gloves.
I've tried touching it, but it doesn't feel hot enough to melt.
It was
(If the Engine is heated by Race or other means by continuously turning the Engine.
I haven't tried to see what happens.)
The texture is solid, and even a slight bump is not enough.
I am relieved that it does not seem to be broken.
View detail
Recommended
We installed this product to replace an external Exhaust System on a CRF-125F.
The price was lower than other manufacturer's products, which was the deciding factor in my decision to purchase this product.
View detail
Exhaust pipe protection
I installed it to protect the exhaust pipe of SEROW250 and to dissipate the heat.
The material is aluminum, so it can be bent and adjusted.
I am a little worried about the durability of the hose band since it is fixed with a hose band, but I will be observing its durability.
The coloring of Aluminum is also very Gun meta-like and austere.
View detail
To avoid scorching Pants.
The exhaust pipe of EXC-F has no guard at all, so the moto pan will soon be burnt and perforated. Guard is necessary because the exhaust pipe also gets burnt and dirty.
OEM is a high-end product that costs more than 10,000,000 yen, so it is hard to afford, but this is a commendation at a reasonable price.
View detail
Too strong to bend. (Lol)
I bought it to bend and install it on the exhaust pipe of the Left Side of my YZ250FX, but in the end I installed only the Clamp.
Well, it's good because it prevents the Moto pan from melting on contact with the Motorcycle when pressing the Motorcycle with the Saka.
The cover is sturdy like an OEM Product, and the Clamp is equally sturdy and probably Material:Stainless steel is rust-resistant and has a shiny and beautiful appearance.
View detail
Burn Prevention
[How is it used?
It is used on a 2022 CRF250RX.
The Exhaust pipe is directly on the side of the body, so if it falls over and gets caught between the legs, it will likely not be hot enough.
I heard that if the Jersey was melted, it would be enough, but if not, the nerves would burn out and there would be no way to recover.
Was the one you received as per Image?
It was more solid than I expected.
Was the installation difficult?
Very easy to install, just adjusting the angle to allow for the slotted screwdriver.
How was your experience with it?
Fortunately, I haven't been pinched yet, but when I touched it to try it out, it wasn't hot at all, so I knew it would work. Relieved.
[Included Parts:were they on?
Body and Band for fixing.
[Was there anything that disappointed you?
None!
If I had to say something, I would say that when the exhaust pipe rubs against the body, there is a very unpleasant sound of the gold material rubbing against each other.......
View detail
Exactly to FMF
Used for FMF exhaust pipe.
The Large is perfect and does not get hot, so it will not burn clothing on contact.
The product is not bad looking, and I think it is functional & well-designed.
View detail
Installed on DG32JXG250 TRICKER
I replaced the exhaust pipe with a Specht exhaust pipe and the OEM Heat Guard moved outward a bit. Sometimes Jeans gets hot so I change it before I get burned.
As you can see in the picture, the heat seems to be avoided as it is back to near normal exhaust pipe.
The length seems to be more than 5cm shorter than Normal heat guard, but I think it's OK at first.
I like the looks of the NORMAL better, but I think this is the one.
View detail
good-looking
OEM Product is not so good, but I'm glad I bought this Heat Guard because it looks great.
However, it is thinner than I had imagined and I would like it to be made more firmly.
View detail
Prevention of burning of Up Exhaust Pipe
It is easy to install because it can be bent freely along the exhaust pipe. It is easy to install because it can be bent freely along the exhaust pipe. View detail
I processed and installed it.
I machined and attached it to the BEAMS front pipe.
The standard Guard melted the hem of the Pants.
Since it is a commuter main, I decided to float it from the pipe to increase the effect as Heat Guard.
Do not use the supplied band, use the screw holes on the Exhaust Guard that comes with the front pipe.
I used the holes in PipeGuard as they are on the front side and drilled holes in PipeGuard to secure the rear side.
The front side is gradually bent at an angle to match the curve of the exhaust pipe and the rear side remains straight.
The Guard is all floating from the Pipe.
I've run it on the road and it doesn't seem to have any problems with vibration.
View detail
It's better than the OEM Guard.
When I replaced it with the 4 Strike Competition Exhaust Pipe of RSV, I installed it for the purpose of heat protection and shielding.
important item
[Was there anything that disappointed you?
It's not a disappointment, but since you can cover a wide range of the exhaust pipe, the Material:It's a little disappointing that the beautiful burn color of the Stainless SteelExhaust pipe is hidden from view.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There was nothing in particular
[Do you have any products to compare it to?
The Exhaust Pipe Guard for 2Cycle is too large and expensive, so this is the only one I could find.
Frequently Asked Items
What made you decide to buy?
As a 4Cycle exhaust pipe UniversalGuard, I bought it because it is the cheapest and longest I have ever seen and it can cover a wide area.
Was the installation difficult?
There is a method of attaching the guard directly to the exhaust pipe, but it does not work for the purpose of heat shielding because the heat of the exhaust is transferred to the guard, so you can install the guard away from the exhaust pipe in the same way as the OEM. Quantity of the ReplacementMount Kit (item number:ZC31-3901):I used 2 sets and installed it. Technically, there is nothing difficult, but because the clearance between the engine cylinder and the exhaust pipe is narrow, I had to use my head to decide the position of the Band and the direction of the Screw to attach the Mount to the exhaust pipe.
【Please tell me the installation point and hang】
Guard is Material:Because it is aluminum, it can be bent to some extent, but extreme bending is not possible, so it is necessary to decide the position of the Mount so that the Guard will fit the shape of the exhaust pipe well.
How was your experience with it?
By using the Mount Kit to mount the guard away from the exhaust pipe, the heat from the exhaust pipe is not transferred to the guard as it should be, and the temperature is high enough that you can touch the guard with your bare hands without getting burned.
[Was the Instruction Manual easy to understand?
The instruction manual is not included, which makes it even more important to have the proper knowledge, skills and tools is required
[Included Parts:were they on?
Stainless Steel Band for Exhaust pipe installation is Quantity:2pc. Set was on.
View detail
I'm not getting hot
Installed on YOSHIMURAExhaust System Up Type
Before the installation, the base of the exhaust system was so hot that it melted the Pants, but it was He was wearing it, so it doesn't seem to matter
View detail
FMF Mega bombThailandThey are just the right size for a large portion of the bomb
I bought it to fit the FMF Mega bomb At first, I put it on the back of the Thai Co-part and on the part that interferes with the raising and lowering of the legs (Band is best for this part of the exhaust pipe, which is of uniform thickness.) However, the Heat Guard that came with the Normal muffler was replaced by the Grinder Cut the Heat Guard of the DRC to the length of the machine and put it on and move it to the Thailand part It's a barrel shape It's a barrel-shaped, so the band is a bit like a "C" shape, but it arrives somehow I was able to cover the whole thing Takana … I think View detail
I installed it in the Mega bomb with no additional parts
I'm not going to mention its performance as a Heat Guard since it's known
This time I tried to install it on the Mega Bomb
It was not possible to install it as it was, but I bent it to widen the Band attachment part of the Body By the way
I was able to install it with the Band that came with it
View detail
That's pretty good!
When running a Dirt, the exhaust pipe is full of small stones, etc Installed
It is easy to install because it can be bent along the curve of the exhaust pipe
It's good for dressing up as well as protecting the exhaust pipe
View detail
I have been using it for about 7.5 years
D I have it attached to the Tracker
It has been about seven and a half years since I installed it
The thing itself is sturdy and doesn't bend or dent when it falls over
When you wear Boots, the exhaust pipe section may be suppressed as well, but it's strong So you can suppress Gun Gun Gun Gun
The good thing about this Guard is that it has a Chamber of FMFPower bombs etc The exhaust pipe is also a place where you can add an exhaust pipe depending on your ingenuity
I was able to pimp the Power Bomb
The downside is that the heat from the exhaust pipe is transferred directly to the legs as it is to the Direct Pants made of polyester get burnt the moment they are hit
I ruined 1 pcPants
Also, the mounting bracket is broken by vibration I tried to look for Repair Parts last year but DRC doesn't offer them I diverted ZETA Repair Parts and repaired it
Pants1 pc ruined, but if you have the Guard, some Exhaust If you have replaced the exhaust pipe, you should install it because it will protect your legs from the heat of the pipe Good
View detail
The claim is amazing!
I installed it because it can be expected that Wear will melt with Exhaust pipe.
Bending can be done according to the shape of Exhaust pipe so it was easy to install.
There was no resonance due to the vibration at the time of traveling, and there was no chattering noise.
I like the likes and dislikes because the shape is unique.
View detail
Function, good, reed
Mounting to RMX 250. Since it is not so hard material, I will bend it according to the shape of Exhaust Chamber. It is not good looking along with the Exhaust Chamber and it took time to make it fit.
Band of installation is also LargeQuantity : 2 pc, SmallQuantity : It comes with 2pc and can handle any thickness.
Just for Length 125ccClass? Well, it's obviously not enough length for the RMX's Exhaust Chamber that I decided to be cunecne. You can covert Right Side but Left Side is in a state where you can not cover at all.
The previous External Chamber outside the company also became Bekobeko and replaced this time so I installed the Guard, but in intense Hit it seems Dent again. It seems that there will be no strength up to that but it seems that Dent can cover when it falls down.
Gray alumite looks also chic so texture is also GOOD.
View detail