Reviews
Fits: HONDA CRF450R, HONDA CRF450RX, BETA RR 4T 350, BETA RR 4T 390, BETA RR 4T 430, BETA RR 4T 480, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FX350, HUSQVARNA FX450, KTM EXC-F250, KTM EXC-F350 , KTM EXC-F450, KTM EXC-F500, KTM SX-F250
I put it on my EXC-F250.
In the product photo, I think it is on the one that is not F.
I was able to put it on EXC-F250.
View detail
Second piece!
A second one is installed as a talisman!
The design is so good that I don't feel too uncomfortable with two pieces on.
View detail
Exhaust System Protection
Purchased for Exhaust System protection.
The Tie Band that came with it was fine, but I installed it with a Stainless Band that I purchased separately, just in case.
I haven't made any moss yet, so I don't know how effective it is, but it is definitely better than nothing.
Design is also good for Race ish.
View detail
Fits: HONDA CRF450R, HONDA CRF450RX, BETA RR 4T 350, BETA RR 4T 390, BETA RR 4T 430, BETA RR 4T 480, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FX350, HUSQVARNA FX450, KTM EXC-F250, KTM EXC-F350 , KTM EXC-F450, KTM EXC-F500, KTM SX-F250
It's ok for universal fitment.
This Acerbis pipe guard is a ok fit on acrf450r. It doesn't really follow the pipe conture to well. It's better than nothing at all. View detail
Burn & Handle Measures
[How is it used?
It is used for CRF250RX.
Exhaust systems are not limited to this car model, but they are parts that get quite hot.
In the event of a fall, the Exhaust System is designed to prevent the body from being hit by the Exhaust System when it is stuck in the body of the vehicle.
Also, CRF250RX of 2022 model has no handle-like part on the Right Side of the body, and the cause of the problem is Large and strange.
By installing this, we can have an Exhaust System so that we can cause the Motorcycle to fall to the Right without difficulty.
Was the one you received as per Image?
As shown in the Image.:I was worried that it might melt because it is rubber, but as expected of Exclusive Design, there is no problem at all.
Was the installation difficult?
It's easy:Tie WrapQuantity:Just wrap it around with 2pcs and stop.
How was your experience with it?
It is much easier to cause. What would I do without it? I feel like, "What would I do if I didn't have it?
[Included Parts:were they on?
It came with a body, a Tie Wrap to hold it in place, and an ACERBIS Sticker.
[Was there anything that disappointed you?
No, I don't!
View detail
Mounting on WR 250X
I have a FMF Q4 and it hits the Silencer when it falls to the Right, so I installed it as a protection in case it falls over. View detail
Good or bad fixation method.
Since the Tie Wrap is used to secure the product, you have to tighten it very tightly to prevent it from coming off, but once it is tightened, it cannot be removed, so you cannot fine-tune the mounting position.
When I try to remove it, the Tie Wrap breaks. The length of the tie wrap is like a monster, and I can't find a replacement at my local home center.
View detail
I bought it.
So far, I bought the POWER BOX SUS Slip-on Silencer because it is Beautiful.
I don't think this Protector will completely protect the exhaust system, but it might help hide scratches if they occur.
Some people put it on the front of their Slip-on Silencer, but I think it's more likely to hit the back of the car when it falls.
View detail
You protect Silencer from Wound.
[How is it used?
I did not want to damage as much as possible the PowerBox of SP Tadao for SEROW250 which I purchased with a feeling of resignation, and installed it.
Was the one you received as per Image?
Heat-resistant material for easy installation on Silencer of any cross-section:It was as Image without discomfort for Rubber.
Was the installation difficult?
It can be easily installed by anyone because it is only wrapped around the part that wants to be protected from the fall Wound and fastened to the front and back evenly etc. with Tie Band of the attachment.
How was your experience with it?
I have fallen over more times than I can count since I installed it, and the Silencer has not been scratched, and has been well protected with the other Guard (the Silencer mounting bracket has been bent inward from too many falls, but the surface of the Silencer is intact).
[Included Parts:were they on?
Tie BandQuantity for fixing in addition to Body:Comes with 2pc.
[Was there anything that disappointed you?
After purchasing this product. "It's a fake, as close to the same shape as you can get. I was disappointed in the price difference too much.
0Other items that may be useful include
Point and hang of installation
Wrap it around where you don't want it to hurt and secure with Band! It's very easy, so don't hesitate to try it.
[With or without Instruction Manual
I don't think there is an Instruction Manual, sorry if there is.
[Easy to understand]
I think it's very clear that the product is exactly what it looks like.
Personally "Good thing I kept it on." This is a product that I can truly believe in.
[Notes]
It depends on how you fall, but if you fall hard you might be able to wear a Tie Band to secure it.
[ITEMS TO BUY TOGETHER
This product alone will not cover the entire Silencer, so you may need additional guards depending on how your motorcycle is used (I have them on the front and back of the Silencer).
[Opinions and requests to Manufacturer
Do you think a cheaper price would stop customers from drifting to the fake ones?
View detail
Stylish Protective Parts
I installed it on my RSV Silencer.
It's so easy to wrap and tighten with Tie Wrap.
Material:Silicon is thick enough to provide protection in the event of a fall.
I also like that the Design is Stylish.
View detail
Silencer becomes a bumper
This is a great choice for MOTARD! View detail
Install it on a slender exhaust system
SEROW250, attached to Tadao Slip-on Silencer, how to use it to roll around in the mountains It was It's a good product that absorbs Damage in the event of a fall. serow is Exhaust Since the system is bare, there is no escape from the exhaust system's dent It is not
However, Tadao's exhaust system has a thicker warp and a structure that protrudes inward After about a month or so, the Tie Wrap on the installation was scraped off by the Tire
If it is FMF, DirtFreak, power construction, or dB`s slender exhaust system, it is a problem If you don't want to damage the exhaust system, by all means
View detail
No other SilencerProtector products are available, so I have to be patient
Designed by Hard and Co-Leverte in appearance; no RefreshingDesign The Material will not dissolve in the Exhaust System Stones can get stuck in the gap between the Exhaust System and Cover before they can be scratched Move it out of place Because of its high plasticity, it can be displaced and remains in its original position
Beware of the CHINA imitation shoddy products that are available on Amazon
View detail
Ideal for preventing scratches on the exhaust system
SEA BASSSV650ABS (2016) It is installed on Earls Gear's WYVERN Exhaust
Originally, I had a One-off Exhaust Guard on it, but I had to get it to Repair I had to wear it instead during that period of time because I had to
Simply wrap it around Silencer and secure it with Tie Wrap
In case of a fall while driving, you may end up with a Gap, but if you are on a standing level, it's enough It seemed to protect the Exhaust System
These are items for Motocrosser, but they are used for a normal road motorcycle I think it's also possible
View detail