Reviews
Fits: YAMAHA XT250X
enigma
It's not what I was expecting.
I bought this stuff because I put a PowerBox on my serow 250carburetor.
The pitch accuracy between the screws was not good, so it could not be installed and the hole was expanded.
(Maybe the PowerBox isn't accurate enough.)
I'm more concerned about...
I looked at it when I installed it.
The bolt is in contact with the exhaust pipe or pushing it.
On purpose? Really?
Because it is uncomfortable, I cut the tip of Screw a little and install it.
I guess it's just cheaper than OEM.
View detail
huge
The installation was easy to install.
It looks strong and secure in terms of quality.
Size was even bigger than I imagined it would be.
I can use it in place of Tandem Footpeg.
Now it's time to see if it will actually protect the Body when you take the Motorcycle down.
View detail
![[Repair / Optional Parts] Heat Shield](https://global.webike-cdn.net/photo/impression/2d/2d04c092c1f0359d5464fc8bd86c08b0L.jpg)
Quality is OK!
I think the quality is good
However, the price..
This price is import-Cost! And I can only tell myself that
Requires a slotted screwdriver or a wrench and a Hex wrench for installation It is
There is no Instruction Manual, and the shape of the underlying gold material is also slightly different, so the front and back I wish I had a brief description of either
It would be helpful if you could at least add a Copy of the photo
View detail
To hide the catalyst
I bought it to hide the catalyst at the time of Slip-on Silencer installation, and the installation is Slip-on Silencer it was installed without any modification by shifting the bunt of on Silencer
View detail
I installed it in the Mega bomb with no additional parts
I'm not going to mention its performance as a Heat Guard since it's known
This time I tried to install it on the Mega Bomb
It was not possible to install it as it was, but I bent it to widen the Band attachment part of the Body By the way
I was able to install it with the Band that came with it
View detail
No other SilencerProtector products are available, so I have to be patient
Designed by Hard and Co-Leverte in appearance; no RefreshingDesign The Material will not dissolve in the Exhaust System Stones can get stuck in the gap between the Exhaust System and Cover before they can be scratched Move it out of place Because of its high plasticity, it can be displaced and remains in its original position
Beware of the CHINA imitation shoddy products that are available on Amazon
View detail
Scale?
Because the Riding Pants melted and exchanged due to exchanger pipe exchange, I was looking for a Heat Guard, where I purchased it because Size was exactly right.
Since there is no problem because there is no direct contact, since Plate's terminal had BALI, the score is modest.
View detail
Advantage over Carbon
I installed it on DJEBEL 250 XC.
I tried installing ZETAUniversal Type, but it was not suitable for DJEBEL which was not bone and I installed this product.
Because it was thin SUS so I thought that the heat will definitely be transmitted and it will be cocksin
- Pasting heat-resistant cloth on the back side
- Installation of Yamaha OEM Parts Number Exhaust Pipe Guard Washer
Heat resistant Washer of Yamaha OEM emphasizes heat resistance like muffler? Gasket. Combined use is quite Recommendation.
Since it deviates by 10 mm from the installation pitch of DJEBEL, it was widened in width with the gold tool attached to One Side, and the jumping-out from Exhaust pipe was adjusted to the same height as OEM.
The supplied Band is too large for the DJEBEL and other thin model of the Exhaust System. I bought SUSBand at 100. The width of the Band is also narrower, and the degree of freedom of installation is also up..
It is a simple SUS board with a shape, so at least I want you to lack heat-resistant Washer like ZETA.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Can be attached to irregularly shaped Silencer
I bought it before I can finish it because I improve standing gore.
Since it is not attached after it is installed, the effect is unknown.
The shape of Silencer was triangular but not circular, but it could be installed.
I think that it is good for people with baggage because it is warm place even after touching.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
We protect the body and Back from the heat of Exhaust System.
When installing Side Back in an off-road car, the Side cover is pushed by the weight of Back, it makes contact with Silencer, so I tried purchasing this product.
The product consists of BodyPlate, Bracket, Bolt nut, Band, Protection Seat.
BodyPlate is a thick material : Aluminum has enough strength. Although others were also written with Impression, since the corner is standing at the end of the back side, when using it for occupant protection at Tandem, Fileetc. It seems better to do a chamfer with.
For Band, the diameter of the Exhaust System is not less than 95 mm and not more than 146 mm is conformity Size. In other cases, you will purchase Band separately and respond.
For mounting, fix Bracket to Plate with Bolt nut, then tighten up Bracket and Silencer with a bunt and fix it.
Body and fixed also Firmly, vibration etc during running etc.. It does not seem to be gapped at.
A little disappointing is that if Nut welded to Bracket it felt it would be easier to fit in the Large width. Mr. DAYTONA wishes improvement for the next product.
View detail
![KOSO Universal Exhaust Slider [Red]](https://global.webike-cdn.net/photo/article/43/1436097788143L.jpg)
Preventing falls
I also wrote it in my diary, but I purchased it with insurance at the time of falling.
Mounting Bolt also 8mm 10mm, each Color is also included, and it was possible to install without especially adding it.
Installation is also securely installed, I do not want it to be turned on, but it would be nice if I played the original role when falling down.
View detail
If it was installed as it was it was rather hot.
I attached a Titanium Exhaust pipe to the XG 250 TRICKER and purchased this Protector as a danger if I touch it.
Installation is easy, but the attached Band is long, so treatment such as Cut is necessary.
It is apparent that the XG250 TRICKER is Slim and it seems like a little protruding...
Since it is protruding again, it became easy for the leg to hit Protector.
It is better than touching the Exhaust pipe directly, but again Material : As Stainless Steel, Protector itself gets hot...
Therefore, when I pasted Heat Seat on the back of Protector, it did not get hot so much and it felt a good feeling.
View detail
Since a pure Heat guard could not attach with the Torque head pipe of the Delta, after wavering with Z-CARBON, the price was lost, and it purchased here.Since it was general-purpose, it was unavoidable, but since EX Pipe was thin, pains was taken over pro
Since a pure Heat guard could not attach with the Torque head pipe of the Delta, after wavering with Z-CARBON, the price was lost, and it purchased here.Since it was general-purpose, it was unavoidable, but since EX Pipe was thin, pains was taken over processing of the surplus Clamp.After all, it cut.I think that appearance may be felt refreshed. View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Probably, it will be better to do by two persons, although one person can also attach. It is satisfied although it is somewhat cheap ^^
Probably, it will be better to do by two persons, although one person can also attach. It is satisfied although it is somewhat cheap ^^ View detail
Fits: TRIUMPH DAYTONA675 [DAYTONA] TRIPLE, TRIUMPH DAYTONA675 [DAYTONA] TRIPLE
Although it was probably management of an Exhaust pipe, there was nothing, but since the guide peg was hot, it attached with the measure. Since it is a partial thing, although carried out, I consider anticipation so that it may not so much change by
Although it was probably management of an Exhaust pipe, there was nothing, but since the guide peg was hot, it attached with the measure.
Since it is a partial thing, although carried out, I consider anticipation so that it may not so much change by the grade which became Massey a little.
Although the front is also written, a Swing-arm portion is worn.
If you think and buy
appearance and a soothing grade, it will not be disappointed so, but I think that it seldom changes since heat is radiated from others even if it attaches this.
View detail
He wanted to attach the pure protector of DR-Z400SM to the power bomb of FMF, and bought this. What were used is only a band and a bolt. The protector part did not use. unexpectedly as good a thing as buying a band single article ordinarily --
He wanted to attach the pure protector of DR-Z400SM to the power bomb of FMF, and bought this.
What were used is only a band and a bolt.
The protector part did not use.
unexpectedly as good a thing as buying a band single article ordinarily -- or -- Since it is high ... if this is used, a pure heat protector can be used about.
the protector of this very thing came out fluently, and its texture was not quite satisfactory.
I think that it is structure of a price.
View detail
Since the inner side of a right leg melted with heat, it wound around EX pipe. Cutting is also easy.
Since the inner side of a right leg melted with heat, it wound around EX pipe.
Cutting is also easy.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Since it is metal, it may be unavoidable, but it seldom insulates. It is fairly hot if it touches.
Since it is metal, it may be unavoidable, but it seldom insulates.
It is fairly hot if it touches.
View detail
The torque head pipe of the delta was equipped. Since the stainless band of attaching is long, it is necessary to cut depending on a pipe diameter. Moreover, since heat insulation packing is not attached, as it is, it has heat.
The torque head pipe of the delta was equipped.
Since the stainless band of attaching is long, it is necessary to cut depending on a pipe diameter.
Moreover, since heat insulation packing is not attached, as it is, it has heat.
View detail
The form where pants do not need to melt now, either is also smart.
The form where pants do not need to melt now, either is also smart. View detail