Reviews
It's a nitro Band for a nitro Silencer.
It's Nitro's Silencer, so it's Nitro's Silencer band.
Most of them come with Silencer, but Nitro is sold with Band separately. (Lol)
Size is also Exactly!
I think the price is a little high for Band.
View detail
That's the exclusive product
I purchased this silencer band at the same time as the Φ90 Stainless Steel Shotgun silencer, and although the less expensive KITACO Universal Silencer Band would have been fine, the silver one for the Φ90 was not in stock. I bought this one because the silver one for Φ90 was not in stock.
The fit is perfect and the quality is perfect, as expected of an exclusive product, but I think it is a bit expensive.
Also, the band rubber does not have a rib, so it was easy to position gap when fixing.
View detail
It is quite solidly made!
[How is it used?
We needed the Exhaust Band when we replaced the Short Exhaust System, so we decided to purchase it.
Was the one you received as per Image?
Material:Being Aluminum, I was concerned about the quality, but I was glad to see that it was more solidly made than Image.
Was the installation difficult?
Simply fit the Silencer.
How was your experience with it?
It was wide and solid, so I felt secure.
Aluminum silencer has Material:Material than Stainless Steel:I think the Silencer band in Aluminum would look better.
[Included Parts:were they on?
Material:It came with a Stainless Steel Bolt and Nut.
[Was there anything that disappointed you?
Not at all. Some people may want anti-vibration Rubber.
I would have appreciated an intermediate diameter of 65mm, as the ▼Size range is 60mm in diameter followed by 70mm in diameter.
View detail
95 pi.
No other size is this good! If you can find Other Brand Product, you may be able to buy it a little cheaper. View detail
Used to install XJR1300Slip-on Silencer
[How is it used?
Used to install XJR1300Slip-on Silencer.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Since it is an Oval shape Exhaust System, I had to shape it into an oval shape, but it was easily done by hand. Installation was also easy.
How was your experience with it?
It works fine, but I am concerned about the durability of the material since it is thin (1,2?).
[Included Parts:were they on?
It comes with.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I bought it as a spare.
I bought this as a spare for the Exhaust System that came with it.
I think this one is easier to use.
View detail
Expected
I purchased this for use with kFACTORYGP Silencer.
The footing and texture are as expected, as it is an exclusive product.
View detail
It was Exactly for Repair of CB1100Normal muffler!
Normal mufflerBand was ruined by Rust, so I replaced it. The price is low, so it helps.
This product has a Band section with Material:The screw is made of Stainless Steel, so its strength and durability are assured.
View detail
cheap
Exhaust Band rubber was replaced due to deterioration.
I was able to buy it at a reasonable price. The one that originally came with it will be the one that came with the Exhaust System.
It looks perfect with the exact same Exhaust Band.
View detail
![Exhaust Clamp Stainless Steel 1.25 W [CLAMP EXHAUST SS 1.25 W].](https://img.webike-cdn.net/catalogue/images/35528/18600667_TS.jpg)
Material:Stainless Steel
Material:I bought it because it is Stainless Steel. I went with Stainless Steel because I thought this part would be affected by heat, get wet easily in the rain, and rust easily. I'm worried about the compatibility of steel and Stainless Steel, but I figured if it's from ChromeWorks, it would be Large durable. We'll see how durable it is. However, it has been cleaned up and I can feel the Refresh feeling in Large. View detail
Exclusive for Φ89Aluminum silencer
I purchased it at the same time as K2TEC's Φ89Aluminum silencer.
It is a dedicated product, so it can be Exactly fixed to the outer circumference of the Silencer.
Since it's a Φ89, I thought a silencer band for Φ90 would work. I tried to fix it with the band for Φ90 that I had on hand, but there was a gap and it was wobbly. (Lol)
So, if you are considering purchasing K2TEC's Φ89Aluminum silencer, we recommend you to purchase this silencer band at the same time.
View detail
The Bolt is Steel, which is −?
When I replaced the Silencer with Other Brand Product, the Bolt of the attached Band that tightens the Exhaust pipe and Silencer was too long.
The Band is made of Stainless Steel, but the Bolt is made of Steel.
View detail
Universal Product is convenient.
Because the appearance was bad by the deterioration of Rubber of Exhaust Band, I replaced it. The design was the same and the price was cheap and it was the right answer to exchange. View detail
Mostly OK.
It is used for the Joint of Slip-on Silencer.
I have purchased and am using it because it is wider and can be hung more tightening torque than the OEM.
If you want to say it, I think the follow-up performance will be 100% if you don't have the R-shaped inner gold part of the Bolt tightening part.
View detail
A must for Silencer fixation!
GSX1300R HAYABUSA 10 year old North American Spec.
In order to attach the Titaniumium silencer of K2TEC, use the Band of exclusive use
It can be used with no problems at all in terms of build and strength
A lot of Silencer bands have come out on Universal, but the price is not different from Large It is recommended to use the special band from the Manufacturer if you want to
There seemed to be a gap in my GSX1300R HAYABUSA when I fixed it, so I had to use it It is fixed with a few washer plates
In terms of use, the Silencer holds it firmly in place without causing any vibration
If you have a 12mm wrench and a ratchet, you can replace the Silencer in just 10 seconds Work done
As for one point of concern, in my case, the fixed position of Band is the Logo of K2TEC of Silencer It is about the letter "C" in TEC Band has come and gone, so I'm going to adjust it when I remove the Tandem Footpeg in the future I think
View detail
Perfect fit
The ChamberSilencer's size is 60 pies and thin, so it wasn't easy to find it on the market But I bought it as soon as I found it, and I found a DIY bracket to fit it visually, and it fit nicely It's done It's a question of how long it can withstand vibration, but it's much better than no vibration We're going View detail
CB1000SF Exhaust Band
The BEET OEM exhaust band ran out after 17 years, so 2.5 years ago now I bought the KIJIMA φ130mm Band and installed it and it is about 138mm A gap of about 5? It was packed with Spacer etc., but it was damaged by Tension Therefore, I used KITACO φ 140mm BandBracket with 1mm Tension Tension adjustment was carried out with one and a half rolls of Rubber and fixed in a reasonable clamping condition (Sighs) (Got it?) In the future, we will confirm this by comparing its durability with that made by KIJIMA View detail
Agree with everyone! The price is Neck?
I think that it is impeccable construction regarding reliability.
I thought that it was OverQuality
I think there is strength.
Pierce Ranking → Bending In a series of machining processes
Is not it hard for you?
I want to know the reason why ASS'Y's product has become 2 Parts Structure.
View detail
Spacer is required for Ф100 Silencer
When installed in Silencer of YOSHIMURA, about 10? Spacer is required. I think that it is because the outer diameter becomes smaller with the thickness of the Elastic band, but it was unexpected. I caught a friendly Nut and managed to install it. Although it is a little narrow compared to YOSHIMURABand, the glow of Stainless Steel is about the same, so I think it is a good item to go from Cost performance. View detail
Exclusive goods
I think that exclusive items are best as well. There was something of the same size, but when you look at it together, there is a slight gap. I think that it is firmer than the cheap and thin one. View detail