Reviews
Good manufacturing, as good as OEM.
It can be tightened with confidence.
It is well made, so let's tighten it up with a proper Band.
View detail
Looks good
The silencer band looks good and fits well my Yoshimura Cyclone Carbon fiber exhaust. I am very happy to have bought this item View detail
Repair of external Exhaust System.
The Band of Earls Gear's Slip-on Silencer that I bought used is not usable because the Screw does not turn in RustRust.
I checked and it was the same as this product.
The band itself is stainless steel, and the screws are iron, so Copa Coat is applied to the screw threads to prevent biting and rust.
It can be tightened normally and looks normal. No exhaust leaks, probably because it is evenly tightened.
I thought it was a good, safe product.
View detail
For carbon silencer.
To Maverick's MV83Carbon silencer.
The Maverick Exhaust Band is a common silver color, so I thought it would be more consistent if I changed it to black. I changed it to black to make it look more consistent.
The color and Size matched.
The Bolt hole in the band section is narrow between the Bolt hole and the Exhaust System, so it might be a little bit higher.
The bolt nut that came with the product was too small to use, so the OEM product was reused.
View detail
KIJIMA Stainless Steel Exhaust Band
I used to use a different band, but when I tightened it, the bolt diameter was a little thin and it was not strong enough.
After a certain amount of use, it was easy for the screws to be ruined by heat and tightening.
This Band has a slightly thicker Bolt and has no strength problems, so this Band is now used.
View detail
It's beautifully made.
I purchased this for my Yamaha SEROW which has a round external Silencer installed.
I made my own back guard to be attached to the silencer to protect the back for long touring. I have been using this product for a long touring, but I have to replace my round silencer band with an oval silencer band because the stainless steel is very hard and it is difficult to use it for other shapes. In my experience, it takes a long time to bend stainless steel by hand or to form it into an oval shape, and the result is not good. Unfortunately, the round Silencer band has been put into temporary storage.
The product itself is fine and well made; it is made of 1mm Stainless steel flat plate machined to 110 pie inside diameter. The bracket is raised vertically from the circular shape and is hammered to hold a right angle. The cap bolt is 25mm long, 7.7mm in diameter, and only needs an 8mm mounting hole. The Elastic band is not just a black flat rubber band, but is made with a horizontal gap to prevent it from moving. The bottom of the engraved Bracket is clearly marked 110 Pi. This kind of workmanship is very helpful when you own several similar parts.
It is relatively easy to make round-shaped bands made of gold where there are machine tools, and other manufacturers also offer a variety of bands. KITACO is a good company that sells at a cost like ConveniencePartsSeries.
View detail
Used for I.D. 60.5Φ.
63-68mmSize is used for Exhaust System with inner diameter of 60.5Φ.
Looking at the cost of Bolt's surplus, it would have been better if it had been a little smaller.
However, there is no problem at all in fixing it, so I am satisfied.
View detail
It was a perfect fit!
I installed it on my Universal Silencer and the size is perfect and I am Large satisfied. View detail
Buy for Φ86
[How is it used?
I changed the silencer of my YAMAHA/XJR400R from MotoGEARΦ100 to K2tecΦ86 and bought this silencer band for Φ86.
Was the one you received as per Image?
It was just as Image.
Other manufacturers also had Φ86, but Silencer itself is also a K2tec product, so we decided to choose this one, which is also from the same manufacturer.
Was the installation difficult?
If you have ever done a Silencer replacement, it is not a LARGE task.
Also, even if you have never done this before, it is not that difficult a task.
How was your experience with it?
It is not particularly good or bad. It's a special product, so it's not surprising.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
The inner rubber part is very easy to come off, I think it is the same for MotoGEAR and OthersBand, but the rubber part of this product is easily gapped.
View detail
Material:Stainless Steel is good
I made a mistake with the size, but I think it is a very good product, Stainless Steel and it won't rust, and considering the burning thing, it is a Material:Stainless Steel exhaust pipe and silencer with band and material:Stainless Steel is a good choice. View detail
Used in SR400
Material:The exhaust pipe and silencer are made of Stainless Steel, so the color of the Plating Exhaust Band is different from the Plating Exhaust Band, but the Material:If the band is made of Stainless Steel, the burnt color will look natural. View detail
easy to get
When I installed YOSHIMURA's Slip-on Silencer, I am a stocky person, and I broke the attached Clamp band by holding the Torque wrench too tight for some reason, perhaps because of the installation angle.
It takes time, but I looked on the Net to order from YOSHIMURA and found that KIJIMA's products are identical to YOSHIMURA's.
It was easy to obtain and inexpensive.
View detail
Silencer band
A little pricey, but I'm glad I bought it. View detail
Silencer band
It's a Manufacturer's Band, so I Fit it to Beauty.A little pricey, though. But it was good. View detail
For carbon silencer
I had heard that it was difficult to find the right size, but I can fix it to Maverick's Silencer without any problem.
Recommended for those who want to Blackout.
View detail
Silencer Fixed
I purchased this product for my car car Silencer-less Toa. It works fine. It can be fixed tightly. View detail
![[Repair / Option Parts] IKAZUCHI Silencer Band](https://img.webike-cdn.net/catalogue/images/76922/g_1_TS.jpg)
trick star exhaust mount
The original Phantasy Star exhaust fixing bracket was broken, and the domestic price is a bit high. I found this bracket for sale on WEBIKE. The price is very suitable. I decided to start it. The shopping experience is very good! Logistics is also very fast! -------------------------------------------------- -------- The original Dream Star exhaust fixed bracket broke, and the domestic price was slightly higher. It was found on Webike that there was this stent for sale. The price was very suitable. It was decisive. This shopping The experience was very good! Logistics is also very fast! Powered by Google Translator View detail
Quality ○○
I only used Rubber because Band did not fit. I did not use it, but the quality of the Band itself was solid. View detail
Silencer band
I used this product to fix the arrow silencer, as the OEM silencer is fixed directly with the bracket, but I was concerned about scratching and heat transfer to the car body. I used this product because I was concerned that it might scratch or transfer heat to the car body. It was very easy to install. View detail
Silencer band
I was a little concerned about the lack of band on the arrow silencer, but now I can relax. View detail