Reviews
Fits: DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 1260 ENDURO, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 1200 S, DUCATI MULTISTRADA V4 S, DUCATI STREETFIGHTER 1098, DUCATI MULTISTRADA V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200 ENDURO, DUCATI MONSTER 937, DUCATI MONSTER 937 PLUS, DUCATI MONSTER 1100 EVO, DUCATI MONSTER 696, DUCATI MONSTER 1100, DUCATI MONSTER 796, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI DESERTX
Custom in Red color Bartz
Black color body is being custom made with Red colored parts.
The small screw part of the Exhaust System installation area.
I thought it would be a little less noticeable, but it turned out to be a good color addition.
I am satisfied with the inexpensive and easy installation.
Naturally, there is no change in driving.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
More than you can imagine.
The increase in RPM was immediately felt!
After changing from the OEM exhaust pipe to the external Full Exhaust System, the RPMs were not increasing well, but by installing the TorqueValve, the RPMs improved to a large range and the Stress was eliminated!
View detail
The flanged style O2 sensor bung allows for an easier and cleaner weld
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, The flanged style O2 sensor bung allows for an easier and cleaner weld. A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a smarter design to easily secure it to the exhaust pipe with a clean weld. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a simple design to secure to the exhaust pipe. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fast delivery and safe packaging
I bought it directly from Korea, but it was packaged neatly and safely, so it arrived quickly and I was able to receive it. I barely bought the last one left in stock and was able to install it perfectly on the variable valve. If other people need it, it would be nice to purchase it. -------------------------------------------------- ------ It was a fastball in Korea, but it was packed neatly and safely, so I could get it quickly and received it. Powered by Google Translator View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000
Purchased to protect stud bolt of Exhaust System
I purchased this for Stud bolt protection as it was not originally included. I recommend it for its accuracy. View detail
It was saved.
I didn't know that only spring hooks were available, but I am glad I was able to purchase one.
Spring is now installed and better, Material:I also like that it is Stainless Steel.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R
ZRX 1200 R
Super processing am thrilled will start my project next year then there are more pictures need some parts Super processing am thrilled will start my project next year then there are more pictures still need some parts View detail
Good product Carbon Exhaust Bracket BMW S1000R Naked 2017-2018 View detail
This for KIJIMA's Silencer band!
[How is it used?
I used it to fix the external Silencer on my TZr50R.
KIJIMA's Silencer band70?Size (https://www.webike.net/sd/20522931/) It is used by wrapping it around the inside of the
How was your experience with it?
It was long enough for a 60mm Silencer.
I used it for KIJIMA's Silencer band, so the width is made with a good size feeling.
The width of your silencer band may be a little too wide, so please check the width of your silencer band.
How did it compare to other products?
The heat resistant Elastic band for Silencer is not so Single Body. (Other than that, KITACO has it out.) I used it for the silencer band of KIJIMA, so I added the manufacturer.
Naturally, I'm happy with the result because it's made in just the right width and looks great.
[Points to note]
As stated, the width may be a bit long depending on the Silencer.
KITACO Band (https://www.webike.net/sd/1343195/) is 25mm wide, so it is necessary to consider with that.
【Review】
The size is just right to use with KIJIMA's Silencer band.
The thickness of the Elastic band of KITACO can be selected, so I thought it would be better if the thickness of the KIJIMA one can be selected as well.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
Great parts.
It is a device that engages the entrance of the Exhaust pipe.
By narrowing the hole of the exhaust pipe a little, the flow speed is increased and the low speed torque is improved.
I use it with SP Tadao PowerBox.
good point
The Torque really rises.
Acceleration is also smoother.
Installation is very easy.
●High quality and durability.
A bad point
None
Recently, GermanyKEDO company's parts which are often seen seem to be real. If the quality of the exhaust can be improved and the performance can be improved at this price, I think it is cheap.
View detail
A little higher temperature resistance is even better.
The exhaust system on my motorcycle has been changed to Other Brand Product, but it is quite hot. After running, it gets hot at a level that cannot be touched.
The rubbers sold at home center will harden and fall apart from the heat, but this product won't do that.
But the heat makes it feel a little stretched or choppy.
So there is no need to say that a higher heat resistance temperature would be better.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000
The costumer is great
I replaced it because it was either current or badly deteriorated
I think the vibration is a little better when I turn it up to high rpm Maybe it's just my imagination, but if it's deteriorating badly, it's a wear and tear product and I'm happy to replace it and feel good about it
View detail
Fits: KAWASAKI ZX-14R
Essential items for making one out
It's big and heavy. (One Side7?) Removing OEMSilencer and attaching Right Side's Slip-on Silencer. I am worried whether the bundled Bracket has a complicated shape and it can truly fix this lid, but it will be attached properly.
I got it in less than about a week from ordering.
However, this lid is just a little expensive. There is nothing like substitute for Home center. Well it can not be helped.
View detail
Good..
It is Just fit to the 30? Wide Silencer band. Since thickness is not so thick, it is easy to handle and degree of adhesion with Silencer is also good. Length is enough, so I think that it can also be used for Silencer which is quite thick. View detail
I used it for Axle Shaft.
Weight reduction is the purpose of the biggest Large. It will be lighter weight under Spring.
It is a little light, but it will not rust, and the spicy shine of the Gold genus is nice Parenthesis.
Small I believe that efforts will produce Large Kid effect.
View detail
Fits: KAWASAKI ZZR1400
Easily change both solo and dual
【What made you decide the purchase?】 What can be done from the Dual Exhaust System to the solo Exhaust System in a simple way.
【How was it actually used?】 I was worried that the exhaust sound would become louder, but on the contrary it became a little smaller than before and I was beaten. The sound quality was more than I expected.
【Was it difficult to install? (Hard parts case)】 As the photograph attached to the handling Instruction Manual got it, I knew how to put it, but it was hard work lying down next to Motorcycle, so it was hard.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Looking at mounting photos to find places that can be installed without the most stress. Do not force it. To do Torque management.
[Is there anything I was disappointed about?] It was also in the Impre of the other person, but the product is shining in Polished and it stands out.
【Hope for Manufacturer - Please let me know if there are any improvement points; I wish I had a burning color of Stainless Steel from the beginning.
【Have you compared items?】 None.
[Others] I think that the Dual Exhaust System can be easily soloExhaust System, so that it is a good item with User's eyes.
View detail
Purchase to install Universal Silencer
I bought only Exhaust pipe and Universal Silencer with Net, but since there was no Spring hook on the Exhaust pipe, I installed it. Since welding is necessary, we temporarily assembled and positioned it, brought it to a welding shop and welcomed it. View detail
They are goods indispensable to Chamber attachment of their own car. there is no production stop -- please come out. If there is nothing since it is consumable goods, it will be troubled dramatically. collect and stock -- it is -
They are goods indispensable to Chamber attachment of their own car.
there is no
production stop -- please come out.
If there is nothing since it is
consumable goods, it will be troubled dramatically.
collect and stock -- it is -- ~.
View detail
Fits: KAWASAKI ZZR1400
It will be a direction, and it will be a Recommendation if a Slip-on is used. , of course, it is also ZZR1400. The ALL MODEL could also be coped with by the Joint gasket, and attachment was also easy. It is if you dare to s
It will be a direction, and it will be a Recommendation if a Slip-on is used.
, of course, it is also ZZR1400.
The
ALL MODEL could also be coped with by the Joint gasket, and attachment was also easy.
It is if you dare to say an improving point... Or [
that I wanted the color to think that it is not conspicuous ] (sweat)
View detail