Reviews
![[Repair / Optional Parts] Exhaust Cancel Device Left Side](https://img.webike-cdn.net/catalogue/images/26043/ninja1000-kyanseru-350_TS.jpg)
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000
Cancellation
Slip-on SilencerRight I bought this for a single side and to make ChainMaintenance easier.
Gasket is required for installation 。
I also feel that the throttle response has improved, perhaps due to the one-piece design.
View detail
![[Repair / Optional Parts] Exhaust Cancel Device Left Side](https://img.webike-cdn.net/catalogue/10972/to1-k029-000a_TS.jpg)
Fits: KAWASAKI ZX-14R
LightExhaust SystemCancellation
Considering my driving style, I wanted to use a LeftSingle Silencer and searched for a similar product, but could not find one, so I bought this product thinking that I could install it with some modification. As a result, I was able to install it easily without any modification. I wonder why they put "LightCancellation" in the product name. Before purchasing this product, I was thinking of welding it from scratch, but the price is high, but I am satisfied with the ease of installation. The only thing I am considering is changing the color. The sound seems to be a little smaller, though I can't really feel the difference since the motorcycle has too much power to begin with. View detail
As a can seraer, it works correctly, but, it is not necessary for a normal muffler.
My GSR750 is equipped with a Slip-on Silencer which seems to be a bit noisy as it seems to be able to pull out.
It is said that the Exhaust Device is installed to gain low RPM Torque, and to meet noise regulations. [Color] There was a rumor that it was attached as a supplemental device just for clearing, and I wanted to try it anyway, so I cancelled it with Can Sera-.
In my initial fantasy, I had imagined that the engine would be smoother, the low RPM Torque would not drop, and the mid RPM and above would be more powerful.
The doldrums have decreased, so it depends on the person. "Easy to get on" I think some people may feel that it's not for them, but it didn't suit me and I had to return it.
I guess the impression would be different if a Full Exhaust System is installed and the fuel adjustment is done by ECUTune.
It seems that the GSR750's exhaust Device was an auxiliary device properly installed to earn low RPM Torque.
As a side note, I had a very hard time getting the exhaust Device Wire back and getting the exhaust Device to be recognized correctly (no FI error).
View detail
It works fine on UniversalRiveter!
[How is it used?
I purchased this Rivet to reinforce the Belt of the Motorcycle Cover because it had come undone and fallen off.
How was your experience with it?
It worked fine on UniversalRiveter.
How did it compare to other products?
To be honest, I can't tell the difference from other companies' products.
[Points to note]
The Sizes are finely divided, so you should buy the right one for your application.
▼Quantity:Set products are fine, but I don't use them very often, so I buy them each time I need them.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
I had my doubts.
TorqueValve was recommended to us by a friend, and we installed it when we replaced the exhaust pipe. I could feel the increase in RPM and the torque feeling. I am glad I installed it. View detail
Repair Parts for Other Brand Products!
External Exhaust System for YamahaDT230 LANZA Replaced as Repair Parts for RSV.
The Exhaust System sutra was Exactly, but the length was a little short.
I applied liquid gasket agent for the exhaust pipe and installed it.
Regularly check for oil dripping.
View detail
A product that's too expensive, but if you need it, you have to buy it.
Because there was no spring hook on the Beams Titaniumium exhaust pipe of WR250X, I welded it.
This is the only one I could find for Titanium, so I bought it. There are too many of them. I don't need this much. It would be nice if you could buy them by the piece.
The thing itself is not bad. I was able to weld it together well and use it.
View detail
AKRAPOVICSilencerfor Repair special size
AKRAPOVICSilencerfor Repair special size, so Homsen has a It is a shape that is not often sold
The Riveter is easy to install and easy to hit However, I think the price is too high. 7,000 yen for 1 pc of Silencer It will be Over, but it's a dedicated product and Brand, so I guess it's no use..
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
Light blowing
This time, the OVER SS Megaphone Exhaust System has been installed with no exhaust leaks and is easy to use I was able to install it I feel the rise of the revolution at low and middle speed is faster than ever before until Limiter comes on 。 Driving will be fun without stress! 。 Replacement of the Gasket is recommended at the time of installation 。
View detail
The size isn't great
I couldn't identify the manufacturer of the Silencer Bracket, so The width does not match, so I cut it and forced it to fit I don't think so, but it's a bit of a shame View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000
It was changed with the Exhaust System replacement
It was changed with the Exhaust System replacement
The original one that came with it was crushed because it had been used for over 10 years
There is no change after the exchange
It's a mood thing
Well, it's just his personal satisfaction because it's a consumable product
View detail
Fits: HARLEY-DAVIDSON FL Drag pipe 70-84
ShovelFLH's external Tapered Exhaust System was necessary for replacement
I purchased a used Tapered Exhaust System to install it on ShovelFLH.
If it is NORMAL, the Exhaust pipe will hit the Bracket of Step Board..
Normally Normally goes under the Exhaust pipe, but here is the Exhaust pipe
Pass over. However, the hole of the Frame and the thickness of the Bracket do not match,
Adjusted by setting the File by File. Harley's outside parts So,
It is like this. I think that the price is too high for a simple steel bar.
View detail
Sounds good
It is for GSR-750 but it fits GSX-S1000F
Installation was troublesome because there is AXIS Tutora in a rather troublesome place
After attaching, strange sticks around 3000 will disappear and will go to Smooth
Idling's exhaust sound is almost unchanged
I hope the price is cheaper a bit - - -
View detail
t=2. With 0 there is no complaints 5 stars
Silencer Band Rubber attached to the Exhaust System started running and it got burned in about 15 minutes and it was so bad that Kemri got out, so I was looking for a heat resistant Elastic band and this was the only choice in Universal. t=1. It was subtle as to what would be like 5, but after all it was somewhat insufficient in thickness.
So we overlapped the remaining Band and made the gap as much as possible. There is no complaints about heat resistance. Thickness 2. I wish I had a 0 mm Lineup.
View detail
It was good to sell!
When installing Silencer of Universal, intermediate Pipe connecting Exhaust pipe and Silencer became necessary.
Exactly good outer diameter and bending Material : I found a Stainless Steel Pipe, but I needed a Spring hook to connect with Silencer and Exhaust pipe.
When searching with Webike, there are two companies handling, both of which are Material : 10 pcs with Stainless Steel. It was Set. For this reason I bought this cheaper product.
I welcomed Spring hook to Pipe at a welding shop who was indebted (Red circle in image).
By the way, I cut off the green arrow by myself with Thunder.
This Spring hook has no problem at the time of welding, after that, even if you actually apply Spring, I am satisfied because there is no problem.
However, Quantity : 2pc. I only needed Set but 10 pcs. What is only Set.. It was the best if there was a small quantity of packaging.
View detail
Not particularly dissatisfied. The shape is good!
I attached it together with the Silencer band of the same Manufacturer.
The end of Rubber is standing and does not gap as it exactly matches the shape of Band.
The thickness was also good, there was no problem in Hold feeling.
View detail
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi.
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi. View detail