Reviews
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Made by POSH for safety!
I always used KITACO but this was cheaper so I bought it.
Compared to KITACO, it is the same as KITACO Large and seems to work fine.
View detail
Fits: HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CBR400F, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR750, HONDA CBX750F, HONDA VT250 Z, HONDA VT250 Spada, HONDA VTR250, HONDA VTR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBX400F, HONDA CBX400 F INTEGRA
4 pieces for 640 yen! It is a high-cosmetics product!
I was worried because it was cheap, but I compared it with the one made by POSH that I ordered with it and confirmed that it was almost the same.
I feel that the processing of the gaps in the Rings is rougher and more GizaGiza than posh, but I don't mind because it is something to be crushed and used.
View detail
Fits: KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Price increase!
Until now, they have been cheaper than other Manufacturers, but they have been very helpful.
Too bad the price has gone up.
It is a consumable item, so even a cheap one would suffice.
View detail
Fits: YAMAHA SR400 1JR, YAMAHA SR400 3HT1-9, YAMAHA SR400 3HT1-A, YAMAHA SR400 S 1JR, YAMAHA SR400 S 3HT1-9, YAMAHA SR400 S 3HT1-A, YAMAHA SR500 1JN, YAMAHA SR500 3GW1-9, YAMAHA SR500 S 1JN, YAMAHA SR500 S 3GW1-9, YAMAHA TX650 All models, YAMAHA V-Max1200 3UF All models, YAMAHA XT250X 5C11-, YAMAHA SEROW250 3C51-55, YAMAHA SEROW250 FI 3C56, YAMAHA SEROW250 FI 3C5C, YAMAHA XG250 TRICKER 5XT1-7, YAMAHA XG250 TRICKER(FI Vehicles) 5XT8-A, YAMAHA ROYALSTAR1300 4WY1-, YAMAHA ROYALSTAR1300 TOUR CLASSIC 4WY1-
Exhaust System Replacement
Purchased because I replaced front pipe with Other Brand Product!
Compared to OEM Product, the price is about twice as much.
K-PIT is sufficient since it is consumable.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
usually
I don't know because I had it installed, but I wish it had been included with the purchase of the exhaust pipe. View detail
Fits: YAMAHA SR400 1JR, YAMAHA SR400 3HT1-9, YAMAHA SR400 3HT1-A, YAMAHA SR400 S 1JR, YAMAHA SR400 S 3HT1-9, YAMAHA SR400 S 3HT1-A, YAMAHA SR500 1JN, YAMAHA SR500 3GW1-9, YAMAHA SR500 S 1JN, YAMAHA SR500 S 3GW1-9, YAMAHA TX650 All models, YAMAHA V-Max1200 3UF All models, YAMAHA XT250X 5C11-, YAMAHA SEROW250 3C51-55, YAMAHA SEROW250 FI 3C56, YAMAHA SEROW250 FI 3C5C, YAMAHA XG250 TRICKER 5XT1-7, YAMAHA XG250 TRICKER(FI Vehicles) 5XT8-A, YAMAHA ROYALSTAR1300 4WY1-, YAMAHA ROYALSTAR1300 TOUR CLASSIC 4WY1-
Exhaust System Replacement
Front pipe has been replaced!
Items essential for the exchange!
Replaced Titanium with Titanium
Design Change
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA ROYAL STAR TOUR CLASSIC, YAMAHA SR500, YAMAHA SEROW250 (SEROW), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
No problem
I bought this product because it is a little cheaper than OEM Product. No problem at all. View detail
Anyway, it's expensive!
Anyway, it's expensive.
I can only assume they are changing the Size on purpose.
I would love to have the same size at a lower price from KITACO!
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
When replacing the Exhaust System
[How is it used?
It was used for Exhaust System replacement.
Was the one you received as per Image?
As per Image.
How was your experience with it?
Not too much, not too little. Excellent cosmetics.
[Points to note]
None in particular
How did it compare to other products?
I have not used any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Quantity:1 Set of 2pcs. and inexpensive.
I used it on a LITTLE CUB and the size is perfect, no problems. View detail
Fits: HONDA SUPER CUB 50, HONDA XLR250, HONDA XLR250, HONDA MONKEY, HONDA VARIE, HONDA DREAM50, HONDA DAX, HONDA SUPER CUB 90, HONDA SPACY80, HONDA SPACY80, HONDA SPACY50, HONDA GIORNO CREA, HONDA NY50, HONDA GORILLA
cheap
[How is it used?
To replace Exhaust System
How was your experience with it?
No problem No exhaust leakage
How did it compare to other products?
[Points to note]
It takes patience to peel off old Gasket.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
High?
Gasket for New Model GSX1300R HAYABUSA AKRAPOVIC Slip-on Silencer (S-S13SO4-HRAATBLJPA). This is for Right Side, Left Side can not be used because the size is different. 6,600 yen for one Gasket is too expensive. View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Note the different finish from OEM
The Yamaha OEM gasket itself has no bumps, but the KITACO gasket is a combination of two gaskets, with a protrusion on the inside and outside that looks like it was welded on. View detail
Fits: HONDA Dio ZX (Dio), HONDA Dio SR (Dio), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA Sh mode (MODE), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, YAMAHA Vino (VINO), YAMAHA Zr SUPER JOG (SUPER JOG), HONDA GROM
NTB Gasket
I was looking for an inexpensive Exhaust Gasket and saw this and bought it. View detail
Fits: KAWASAKI KLX110 D All models, KAWASAKI KLX110 L LX110A All models, KAWASAKI KLX110 All models, KAWASAKI KSR110 KL110A All models, KAWASAKI Z125-PRO BR125H
It works fine
When replacing the Exhaust System, don't be stingy and use a new one!
It's going to leak exhaust.
View detail
Shovel headExhaust Gasket
I replaced it when removing and installing the Exhaust System on the Shovel head. Compared to paper type, this product is easy to handle and reasonably priced. I have no problem using it, and I think it is a good product. View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400
To replace Exhaust System
This is Quantity:1pc. of Y-15.
The de Raster needs two Gaskets.
A new one is safer than RustRust's Gasket.
This is a must-have for Exhaust System replacement, so I think it is a good buy.
Recommended
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA N Max, YAMAHA N Max 155, YAMAHA Tricity155
WR155
I bought this as a backup because I thought that if it fits the yamaha 155, it would also fit the wr155 of the same Engine.
When I replace the Exhaust System, I'm going to try to match it with the one on the body.
The quality of the products is very good.
View detail
Fits: YAMAHA YZF-R3, YAMAHA TDR50 All models, YAMAHA TDR80 All models, YAMAHA XT650Z All models, YAMAHA YZF-R125, YAMAHA YZF-R15, YAMAHA YZF-R25 1WD2, YAMAHA YZF-R25 2WD1, YAMAHA YZF-R3 B021, YAMAHA YZF-R6, YAMAHA GRAND MAJESTY250 5VG1-, YAMAHA MAXAM 1B71-, YAMAHA MAJESTY250 4D91-, YAMAHA MAJESTYS 2LD1, YAMAHA MT-07 1WS3, YAMAHA MT-07 1XB4, YAMAHA MT-07 A 1WS3, YAMAHA MT-07 A 1XB4, YAMAHA RZ50 1HK, YAMAHA RZ50 5R6
Not compatible with Wr155?
I bought this as a spare, thinking that if it fits the Yzf-r15, it will also fit the wr155 of the same Engine.
However, it seems that the one on the fit was an older model.
Compatible with.
https://www.webike.net/sd/23615058/
Ya
https://www.webike.net/sd/23615054/
A look at the
View detail
Fits: HONDA All models of SHMODE JF51, HONDA All CABINA 50 models, HONDA CABINA 90 All models, HONDA Grom FNO. JC61-1000001-1299999, HONDA Grom FNO. JC61-1300001-, HONDA JULIO All models, HONDA JOKER50 All models, HONDA JOKER90 All models, HONDA All Giorno models, HONDA SUPER CUB 110 JA07, HONDA SUPER CUB 110 PRO JA07, HONDA SUPER DIO SR All models, HONDA SUPER DIO XR BAJA All models, HONDA SUPER DIO ZX, HONDA SUPER DIO All models, HONDA TACT AF24 All models, HONDA TACT AF30 All models, HONDA TACT AF31 All models, HONDA All TACT AF51 models, HONDA TACT S AF30 All models
It's a very ordinary Gasket. No particular problem.
This is a very ordinary exhaust gasket, exactly the same shape as the OEM one, so quality is not a problem.
The price is reasonable, so don't scrimp on replacing your exhaust system.
Bolt to stop Exhaust pipe, Quantity:Pair (for Left and Right) Let's tighten the Do not tighten only one side strongly.
In the worst case, if you bend or break the Stud Bolt, the repair is Large strange.
View detail