Reviews
Somewhat effective
It seems that everyone is buying Bubble, Inner silencer, etc. because they think they are so effective!
The Silencer's original End Baffle is effective (because it blocks the exit).
The insulation, which is called "sound deadening material" in the middle of the road, does not muffle the sound (it does muffle it a little, but only a little).
This product is not very effective, but it does have some effect.
[That's about right. Buy on the second place!
I installed Type S this time, but M Type and Type L are almost meaningless (a little bit is possible).
The average person can't tell the difference between 90 decibels and 91 decibels.
90, 94 and 98 would be totally different.
It only muffles the sound to that extent, so don't give it an over-large rating.
What I'm trying to say is. [Not very effective]. that is to say
[Sound quality changes, volume remains the same. And [The volume changes, but the sound quality remains the same. And Brushbo!
If you want the effect, Long Type is the way to go (though I've never installed it).
View detail
I guess it's better than nothing.
I write honestly and without discovery.
First of all, I don't like Automatic magic, but this product has been on my mind for several years (would I like it?).
It was in stock at WeBig, so I kind of bought it.
What did you think after installation?
Better than nothing? Degree.
I think the backward Long Type would be better.
I have Maverick's Inner baffle muffling type, so I am very interested in the backward type.
But I think it's great that the volume goes down with Items like this.
I'm attaching a photo and will leave a comment on the photo.
The exhaust system is StainlessYZF1000 THUNDER ACE of Over, and the silencer is GP Type of the early model of kFACTORY, but I am thinking of replacing it with Stainless carbon of techserfu that I have. I'm thinking of replacing it with techserfu's Stainless carbon.
I think this product would be the most efficient since techserfu is about the loudness of a Large person!
What I'm trying to say is that I want as webigPoint as possible with longer comments.
In case you're wondering, an average slight bending of the nails in three places was enough.
If the amount of bend is taken too Large, it will be difficult to return Large change.
The manual is very poor, but the person in MotorcycleManufacturer is a guy, so it is difficult to understand the manual if you don't have some knowledge of the product.
If you are not a self-starter, please ask a Motorcycle shop and pay for the labor (they should be able to take responsibility if something goes wrong).
This is a report from the field.
View detail
Muffled replacement available
There is a muffled replacement and you can hear the bass well. View detail
The effect is subtle ….
The quality of the product is good, the welding is beautiful and the large size is good. The installation work was not difficult if you have the skill to install the exhaust system, and the size of the product and the inside diameter of the exhaust system is exact, so I did not have to adjust anything.
Exhaust System is Asahina RACING79S for GSX1100S KATANA. As for the volume, I did not feel that the volume was suppressed especially in the Idling condition.
However, I felt that the mid RPM range became Mild, although I opened the Axel and blip pinged it while the car was stopped.
The purpose of this purchase was to install this product as a countermeasure for the volume limit at the time of the last vehicle inspection.
We are very happy with our purchase.
View detail
The fine Size is selectable, which is appreciated.
I purchased this one because the Screw pile on my current Baffle had been crushed.
The construction is solid with aluminum cut-outs.
I measured the size and purchased it, but the baffle was a little too large, so I had to shave it down and install it.
No complaints about the sound deadening effect.
View detail
For vehicle inspection.
It is good because it is inexpensive, and I think it is easy to process because it is made of aluminum. View detail
T&F Installed on Drag pipe........
Inner silencer alone is quite a blast! Even with the baffle that comes with the Exhaust System, it's still a bit too much........
American, apparently, but to take care of your neighbors, you might need to install two of them on each one, or something!
Sound quality-wise, it suits SHADOW, OK!
View detail
KERKERMegaphone on the Inner silencer.
The inner diameter of the pipe after the assembly part of the KERKERMegaphone installed on a Z650 is Φ60, so I bought it to use as an inner silencer for vehicle inspection. The proximity noise level when installed as it is is about 97-99dB using a noise measurement application. How reliable is the app? But I wanted to muffle the sound a little more, so I stuffed Glass Wool inside the punching pipe.
In this state, it is now 95-97 dB, so for now, the car will be inspected with this.
I had hoped for a more muffled sound, but the StraightPunching pipe did not produce the Large effect I had hoped for.
View detail
Performance as a Baffle
Looks and finishes are good.
I've gone to the trouble of installing it.
There was almost no change in volume as Baffle.
View detail
At Ken TEC Exhaust System
The Silencer that came with the Ken-TEC Exhaust System is too quiet, so I bought it.
Silencer is not necessary, but it is fitted for neighborhood disturbance.
Soundly satisfactory.
However, the production is quite cheap for the price.
It was not straight to begin with, so I thought it was something like this.
I'm not sure about the durability yet, but it doesn't look like it will last long.
View detail
I am convinced because of the reasonable price.
It's inexpensive and not very effective at muffling sound.
I am satisfied with the quality as it is made by a well-known manufacturer.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Nothing, nothing.
MRSRACING Silesa−70L purchased.
As a sound, it's great, but as a pack, it sucks.
Worst driver I've ever had who delivers outside of the specified time, even though the time was specified.
Yamato or Sagawa is the best!
I will never buy from Webig again!
View detail
Anyway, it is expensive. And I waited 4 months for delivery.
[How is it used?
Carbon97 was too noisy, so we bought the Sports formula.
For city driving.
Was the one you received as per Image?
Yes
Was the installation difficult?
very easy
How was your experience with it?
Moderately better loudness.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Anyway, we waited 4 months for delivery. This is too long for this level of Gold genus processed goods.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Bass heavier than expected
It is a change from Small, and it sounds moderately good now. I will run with this for a while. View detail
If you choose Engine Displacement Volume.
If the Engine Displacement Volume is Large, there is not much sound reduction. View detail
It's well made, but...
I used it for Tsukiji TR. It is possible to install it like Mr. Tsukigi's Included Parts:even if the nail for the fixation is not raised especially by pontification. I think that the volume is slightly down. (Idling) Low speed Torque is slightly improved (Start is easy) TR tube is explosive sound in the first place, but I wanted it to become quiet a little more. (When I replace the ZX with a good exhaust system, the Idling becomes unstable, but after installing the Baffle, it has calmed down a little. The high speed does not feel the influence so much even if it does not do the fuel tune setting. By the way, when End Baffle is installed, it is quieter than OEM. I am not satisfied with the high price though the production is good including welding. View detail
feeling
It makes a pleasantly quiet sound. I was expecting a little more. View detail
SC project gp70r installation ok
Installed in Exhaust System of Title notation.
Because the original exhaust system is without Baffle setting, it is necessary to open the hole for fixing Baffle. The sound deadening effect was high, and only Baffle without Glass Wool was able to deaden enough. The end Baffle for the φ70 with an angle is not easy to find, and the angle of the gp70r is almost perfect.
View detail
Automatic magic Inner baffle
I installed this on a ZZr1100 Mather assembly tube. Basically, it can't muffle the sound. However, it will increase the exhaust resistance, so it will increase the torque. Of course, high rpm will be sacrificed. View detail
It's pretty loud. (^^;)
The volume is quite Large fine-grained. Personally, I thought that MSilencer is just right.
It's easier if you have a special tool with a return on the end to pull the Silencer out. It was quite hard.
View detail