Reviews
It succeeded in the ability of structure to muffle this product effectively well dramatically. Four strikes of RSV Since he had no Baffle of a Series III Silencer and it was quite noisy, it was good to equip with this this time. sound volume a
It succeeded in the ability of structure to muffle this product effectively well dramatically.
Four strikes of
RSV Since he had no Baffle of a Series III Silencer and it was quite noisy, it was good to equip with this this time.
sound volume and tone quality became the sound of good touch very much.
You also recommend it to those who are using the above-mentioned Muffler!
After adopting this, it also became a Torque up of medium speed!!
I think that what is necessary is for me to be easy and to just merely become since it is expensive.
View detail
A/C/F VOLTAGE attached to 03 model Z1000 It is used for a Titanium full exhaust. Although it was explosive sound roaring, the form is pleasing and it worried. When inserted, the Idling became quiet clearly. It stopped also worrying the warmth
A/C/F VOLTAGE attached to 03 model Z1000 It is used for a Titanium full exhaust.
Although it was
explosive sound roaring, the form is pleasing and it worried.
When inserted, the Idling became quiet clearly.
It stopped also worrying the warmth in
house door.
Touch which will have been done in which its best and muffled even in about 3000 rotation if it begins to run.
If it becomes 5000 or more revolutions, I will feel that it hardly changes.
A price is high whatever it may say.
Probably, the degree of satisfaction was higher if it was
half-the-sum grade.
Since
, however the engine performance are demonstrated, it is satisfactory.
View detail
"It attached to titanium silencer GP-LOOK outside diameter of phi 70. Although the silencer body was not explosive sound roaring because of the inside diameter is phi 45, the neighborhood's feeling was worrisome at the time of the warm-up at night or earl
"It attached to titanium silencer GP-LOOK outside diameter of phi 70. Although the silencer body was not explosive sound roaring because of the inside diameter is phi 45, the neighborhood's feeling was worrisome at the time of the warm-up at night or early morning, and maintenance. As for the sound volume after attachment, it is not like a normal muffler, but it seems it may be ok to blow empty at the time of maintenance at night, and it is also likely to pass an automobile inspection depending on a model. Moreover, since there was admiration attached clearly when seen from back after attachment, less conspicuous with the dirt by secular change could not be waited, and I did it on myself of the lusterless heat-resistant black. Since the level could not be maintained easily but troubles were suffered by attachment when making a fitting hole in a silencer, two-person work is recommended." View detail
Since explosive sound roaring [ the Muffler made from a hot dog ], it was used simultaneously with a DAYTONA Glass wool to W wall Baffle. A few which I regard as cutting 100 dB became quiet. It adds at the time of the automobile inspection. It was
Since explosive sound roaring [ the Muffler made from a hot dog ], it was used simultaneously with a DAYTONA Glass wool to W wall Baffle.
A few which I regard as cutting 100 dB became quiet.
It adds at the time of the
automobile inspection. It was automobile inspection success easily in 88 dB at the End buffle for Super traps.
View detail
Super-explosive sound roaring settled in the low-pitched sound of good touch. Although the After Fire was also severe, it stopped almost coming out. Although attached with the Wyvern, the outer circumference was deleted somewhat. It completed i
Super-explosive sound roaring settled in the low-pitched sound of good touch.
Although the
After Fire was also severe, it stopped almost coming out.
Although attached with the
Wyvern, the outer circumference was deleted somewhat.
It completed in about 5 minutes with
iron file.
Since
adjustment can be performed, I would like to try many things.
Although
amount of money is a little higher, I think if it considers that the Baffle of a Punching carries out at least 10,000, to the extent that it is cheap.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS)
It is just a Racing sound. That it can blow going up in the high rotation area is the highest. , however use on a public road are dangerous sound volume.
It is just a Racing sound.
That it can blow going up in the
high rotation area is the highest.
, however use on a public road are dangerous sound volume.
View detail
It attaches to BMS Titanium-full-exhaust-muffler Racing-type R-EVO Titanium long solid phi 89, and is a schedule.It is quite quiet although it is not called the pure average in case of the Baffle currently attached to BEAMS. If it removes
It attaches to BMS Titanium-full-exhaust-muffler
Racing-type R-EVO Titanium long solid phi 89, and is a schedule.It is quite quiet although it is not called the pure average in case of the Baffle currently attached to
BEAMS.
If it removes conversely, it will change to the explosive sound roaring that it has ridden and the head becomes painful.
Having thought at the time of this Nojima Baffle SYP504 purchase chose with the goods which perform silence to the extent that it does not become the little and explosive sound roaring of
exhaust steam resistance.The Size of
inner side Pipe serves as the
inlet-port:abbreviation phi41
exit:abbreviation phi 30.Since the bore is thick more clearly than
BEAMS, I think that it is close to one's ideal. [
]
View detail
Although purchased with reference to the Sample picture, unlike the End buffle for Standard silencers besides , there is no cone-like portion.Since the thing of the form is only 1000 yen also in that wanted the thing of cone form [ like ], and SYP
Although purchased with reference to the Sample picture, unlike the End buffle for Standard silencers besides
, there is no
cone-like portion.Since the thing of the form is only 1000 yen also in that wanted the thing of cone form [ like ], and SYP504
price, I would like to ask you for exchange of a picture very much in myself. [
]diameter of
mounting port: -- bore [ of a phi47
inner side Pipe ]: -- phi23
overall-length: -- since 50mm
23 mm in bore cannot be found rather, it is very regrettable.
View detail
Since the Restrictor was not attached although the Silencer before regulation of Delta barrel 4 was got, it purchases here. Since it was before regulation, although he was worried whether it can attach, problem-less て装着 of it was able to be carri
Since the
Restrictor was not attached although the Silencer before regulation of Delta barrel 4 was got, it purchases here.
Since it was before
regulation, although he was worried whether it can attach, problem-less て装着 of it was able to be carried out at all.
sound volume is the somewhat large kana all over a イイ sound * town in a path through a wood (^^; ... There is also no
weight and the increase of weight is not felt.
Since it is satisfactory *5 if the
price is cheap to a slight degree, but it is an appropriate price, it is *4.
View detail
So so sound volume can be stopped. -- although the run has not been carried out in this state yet, the low-speed Torque should be increasing -- or [ that it is better to make on one's own if a thing with ?, however a high price is a little made
So so sound volume can be stopped.
-- although the run has not been carried out in this state yet, the low-speed Torque should be increasing -- or [ that it is better to make on one's own if a thing with ?
, however a high price is a little made as for --
its original work ] --
View detail
Earls Gear The middle Pipe of the Wyvern was equipped. It is purchase which gets disgusted with the awkwardness of appearance of the End buffle, and uncool tone quality. tone quality becomes the mild touch which took the angle of Baffle
Earls Gear The middle Pipe of the Wyvern was equipped.
It is purchase which gets disgusted with the awkwardness of appearance of the
End buffle, and uncool tone quality.
tone quality becomes the mild touch which took the angle of Baffle nothing and a Straight state.
The point which does not need worries about degradation by the good point not using the Glass wool for performing [ regulation of sound volume ]-by turning 13-mm Bolt
and a noise reduction material deserves
evaluation.
A bad point has a high price (smile). After
, if a Bolt on is expected, it will be betrayed.
The clear-cut idea of being a general-purpose article is also required also until it
Opens, since there is also a Case which can equip and is not if the circumference of
circumference is not considerably deleted with a sanding machine.
View detail
"07 years Injection vehicle. I was annoyed by the badness of the throttle response of a normal muffler, and a feeling of excrement, and I decided on muffler exchange. I chose cycle shack of 2.5IN.(it was equipped with a same baffle as SE2) However ... sou
"07 years Injection vehicle. I was annoyed by the badness of the throttle response of a normal muffler, and a feeling of excrement, and I decided on muffler exchange. I chose cycle shack of 2.5IN.(it was equipped with a same baffle as SE2) However ... sound volume is so loud and I cannot start engine in the residential street at daytime and it is further embarrassment ... It was replaced in the press wool type. Although I cannot say it becomes quiet, I can realize a sound deadening effect certainly. It is the sound I can apply engine in the garden, (limited to daytime) and the depth, such as the large displacement vehicles do not go out there deep bass, one shot of the plosive is emphasized, and good feelings are increased. The throttle response was also finished on the perfect level. If it shifts to the higher gear at the time of a low speed, a little axel is opened and it is made feeling, a feeling of a beat and sound appropriate for a harley can be enjoyed fully." View detail
It was attached to type 7 of Yoshimura in Monkey. Since it became annoying truly when bore up was done, I had it. Since the form of the tail is unique, I processed but I think it is bolt on if it is an usual tail-shaped. It is glad to be this size, but if
It was attached to type 7 of Yoshimura in Monkey. Since it became annoying truly when bore up was done, I had it. Since the form of the tail is unique, I processed but I think it is bolt on if it is an usual tail-shaped. It is glad to be this size, but if the hole is a little smaller, it is better as silence is the purpose. View detail
Since attachment removes a Silencer and only puts it into an Exhaust pipe, of course, it is easy. The omission wanted to improve that it is too good and awkward, and purchased just for a moment. Although it also expected that sound also became
Since attachment removes a Silencer and only puts it into an Exhaust pipe, of course, it is easy.
The omission wanted to improve that it is too good and awkward, and purchased just for a moment.
Although it also expected that sound also became small to a slight degree although I think that there was a certain amount of effect, it was not like [ which was considered ] there.
Although I think whether it will be except and the elaborate structure if it takes in its hand, but there is nothing, if cheap to a slight degree, I think that it was good.
View detail
It was bought with the slip-on trumpet muffler of the same company simultaneously. Although attachment was easy as the description, a flue outlet does not become same, and the form of a product is good, but when it inserts in to a muffler is not quite sat
It was bought with the slip-on trumpet muffler of the same company simultaneously. Although attachment was easy as the description, a flue outlet does not become same, and the form of a product is good, but when it inserts in to a muffler is not quite satisfactory. Sound volume is large. I wonder if it is a silencer and use the other company's glass wool. View detail
It is used for a VOLTY. although the Mega TRY Oval of the YOSHIMURA came to hand in medieval times -- a YOSHIMURA -- since there was no pure Inner baffle -- instead of -- it purchased. Although it was used originally [ ], having attached to th
It is used for a VOLTY.
although the Mega TRY Oval of the YOSHIMURA came to hand in medieval times -- a YOSHIMURA -- since there was no pure Inner baffle -- instead of -- it purchased.
Although it was used originally [
], having attached to the Muffler end, but it was able to insert between the Exhaust pipe and the Muffler by easy processing.
As the
notes (I did not use it), It is that an attached Bolt nut is an Inch size, the outside diameter of a thick portion being delicately thick, and not going into the Exhaust pipe of the outside diameter phi 38 (1-1 / 2 inches), and that the true circle has not come out for convenience' sake on manufacture.
Although it is
, a sound deadening effect is also high, and is preeminent for a Cost performance also as a processing Base, and it has satisfied it very much than expected.
View detail
Since the omission was bad and stopped turning obediently to a high rotation area although it had equipped with the End buffle which was attached in order to lower the sound volume of a 350-mm Short silencer, sound volume is also stopped, and this product
Since the omission was bad and stopped turning obediently to a high rotation area although it had equipped with the End buffle which was attached in order to lower the sound volume of a 350-mm Short silencer, sound volume is also stopped, and this product is discovered while looking for the Baffle which can moreover be turned without a Stress to high rotation.
Satisfactorily, it is accurate and even a 350-mm Short silencer has only equipped with
wearing in between.
Sound volume did not fall off, so that it considered by the kana grade which became somewhat quiet, when compared without the Baffle about
sound volume.
About the
omission, it came to turn obediently to high rotation satisfactorily.
View detail
[webike Monitor] In quest of a higher sound deadening effect, it purchases from the usual Type of W wall medium size. The Silencer of the Muffler currently used is 370 mm in the bore phi 45 and die length. -- although the Wool is wound
[webike Monitor] In quest of a higher sound deadening effect, it purchases from the usual Type of
W wall medium size.
The Silencer of the Muffler currently used is 370 mm in the bore phi 45 and die length.
-- although the Wool is wound around this product --
-- in my Silencer, the bore was too thin and it did not enter -- it sake, br(ed), > removed and equipped.
Although it is the
effect, in an Idling, the difference from a Type is usually hardly understood.
If
, however rotation are raised, it turns out that it is muffled more to be sure.
As
feeling, it is thought that it was usually muffled about 5% rather than the Type.
A Recommendation can be carried out to the direction of liking to usually drop sound volume to a slight degree from a Type.
It seems that a Power and the growth of high rotation however fell a little too.
As a
difficulty, it is the point that a price is high too.
As for the comparison which carries out
number Type purchase, it is hot with such goods that it cannot do easily.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
[a Webike monitor] -- since there is nothing if it still equips and runs, an efficient thing cannot be written, but it is with L size -- rather -- an omission -- merit that's right. I think that structure is also solid. One plastic bag was worriso
[a Webike monitor] -- since there is nothing if it still equips and runs, an efficient thing cannot be written, but it is with L size -- rather -- an omission -- merit that's right.
I think that structure is also solid.
One plastic bag was worrisome for a while in the package..
View detail
By the automobile inspection, since sound volume was uneasy, it equipped. Mufflers are a tsukigi vortex +TR silencer and a silencer sheep mounting state. The sound volume in the automobile inspection place has been satisfactorily passed by 96db.
By the automobile inspection, since sound volume was uneasy, it equipped.
Mufflers are a tsukigi vortex +TR silencer and a silencer sheep mounting state.
The sound volume in the automobile inspection place has been satisfactorily passed by 96db.
If a price can be lowered to a slight degree as others are also merely pointed out, I will think that it was better.
View detail