Reviews
Mounting on DELTA 4 Exhaust System. (Purchased with Webike Rakuten)
【What made you decide the purchase?】 Until now it was too much firing in the explosion so purchase.
【How was it actually used?】 As for the performance, the explosion became quiet, it was good, but since the rushing is getting worse, I am a bit puzzled on the rise.
【Was it difficult to install? (Hard parts case)】 The installation itself is painted with a heat-resistant liquid Gasket, returned to its original state and dried. it's simple.
[Is there anything I was disappointed about?] If there is a problem, the TIG welding of the three Pipe of goods is miscellaneous. Although I went around for a while, the way to put out waves was like an amateur, and it looked like it was not amusing when I could get here.
【Hope for Manufacturer - Please tell me if there are any improvement points】 Since it is exhaust of Single especially, how to draw a weld bead that is likely to break due to aged deterioration is uneasy and I am scared when it can be taken.
【Have you compared items?】 There is none.
[Others] Let's welcome the craftsman to weld at least visible places.
View detail
It is transfer from Silent type
Balance of sound and Power think that it is good if setting is put out.
Personally I wish it was a bit bassy more - - -
Middle to high speed rotation improved without sacrificing low speed range.
If possible, I'd like the diameter to be 3 to 5 mm more extended Type - - - (Lol
View detail
PMC Racing valve for S1 exhaust
It is Baffle purchased by Left. Large became better than Right. I ran after installing but I feel comfortable rising and comfortable. The volume is comfortable. I am very satisfied.. View detail
Almost satisfied
First of all there is no silencing effect.
Rather than silence is not the purpose.
As explained in the explanation, this is to adjust the exhaust pressure, and it has a considerable effect on recovery of Torque by adjusting exhaust pressure.
I think that it would be quite possible for people to be concerned about what to do, because the exhaust vent is excessive and the bottom does not turn at all.
I have attached the BEAMS Full Exhaust System pipe to the MC 41, but the Torque under it has increased visibly.
Even though Throttle can be opened, it sounds like exhaust pressure like the OEMExhaust System!.
It is also good that the sound quality does not change much.
Although I feel that the high range is slightly suppressed, since it is almost the original exhaust sound, I like the original sound so it is the best for those who want to tinkle without changing the sound quality.
It is easy to install.
Also, since Glass Wool attached from the beginning is saying that it will be lost due to haste, I removed it and installed it.
If I want more exhaust pressure I think I will sit down Steel wool.
To complain about dissatisfaction, it is that the full length is not written.
I ordered the φ 50 S wall Size S because the Exhaust pipe is bent at the entrance of the Exhaust System but it was quite uneasy because I do not know the total length of the product.
I do not end up if I did not enter after all.
I think that SizeSML will change the diameter of Pipe in addition to the total length, and the effect will also be different, so I want you to manage somehow here. (By the way, SizeS was about 58 mm)
Also the price - - - Although it is not said that it is too expensive as it was effective, it is not easy to say that it is Torque up, so it is a little puzzled if we can recommend it to people ☆ We made it to 4 ☆.
View detail
Large satisfied
I attached it to Slash Cut Exhaust System of VIRAGO 250.
Easy to install, it became a very nice sound.
As my feeling, it sounds like I made the sound of a straight pipe purely Small.
The power of the sound has increased with a little expense and I am very happy.
View detail
CYGNUS X3 Taiwan Spec. The mounting
I felt dissatisfied with the volume of NORMAL Baffle so purchase.
Normally Baffle is often a gentleman's volume, but a bit unsatisfactory - - - But without Baffle you can not run - - -
Recommended for those who like.
It's not too noisy, it's not too quiet, it increases the Custom feeling with reasonable volume.
View detail
BEAMS Beams Semi-Racing Baffle for SS 300
I installed PCX 125 as soon as it arrived
It's quite difficult to remove NORMAL's Baffle
Was. Also, it is hard to match the Screw hole.
I think that I can adjust after somehow wearing Baffle
Just fit past once and pulled out again.
I think that this should not be good, but unexpected
It's time to take ☆ Minus 1. NORMAL Baffle
It's quite quite so it's about this volume (Too noisy, not too quiet) I am satisfied with.
View detail
Purchase
I attached it to Megaphone Exhaust System of CARKER type. From the normal 60 Φ Exhaust System, this type of Exhaust System was worried whether it could be installed because it is slightly thick, but it was able to install safely. We installed a lot of claws but installed a little clearance between Baffle and Exhaust System so we handled the handheld Glass Wool and dealt with it.
I purchased MBaffle this time but feel like a little silencing effect. Originally this Parts is not intended to mute. The original purpose is to improve the exhaust system's omission. After exchanging for this Baffle obviously improved, it felt like Throttle improved and Torque was up..
View detail
Igie RidersSLASH Longo Exhaust System perfect!
Today, with the expectation put in! Because it was a straight tube Thunder sound! Personally OK but purchase determination with a neighborhood inconvenience! Size is also 47 Pitari! - - - Kashakasha sound of treble disappears! Potato Potetchi at low temperature ♪ (Harley of the 1970s) It is a good sound! I breathe in the middle until the engine warms ♪ This is also good! Very good so I will order additional order.
Sound is also Large - - - Compared to explosion! Although the inspection may be Gili, the high speed will also extend!
View detail
Beams Semi-Racing Baffle for SS 300
Although I used Standard Baffle as it is, I installed a purchase of Semi-racing baffle without enough space so that the volume does not change with NORMAL. It was good to exchange with a good volume. View detail
S Size.
It is with Shotgun of Trickster. Purchase for explosion correction and Torque recovery. I have purchased M Size before, but it did not change very clearly. This time I purchased S Size. I was worried about M Long, but in consequence it would not change? Which cheap price choice is this?.
As a result, I was able to quiet enough, and it was good that Torque feeling returned firmly and After was alleviated. You can also go well on S Size. If the price goes a little cheaper then - - -.
View detail
It does not enter.
The exit border was raised about a few millimeters of Comma, and it entered only half way.
In addition, Baffle of Standard broke the stick from the root during running.
I think that it is a Manufacturer with quality problems.
View detail
To MAJESTYS リ ア ARA's Silencer
In Baffle attached to Re-ARA's Full Exhaust System, PassPass and noise are mixed, I bought it because I disliked it.
In NojimaBaffle, since the inside of Baffle is made up of a long Pipe, Passaph noise peculiar to Baffle has disappeared. I am satisfied.. Also the inner diameter is about 30 π, so it is thick, so coming out is not too bad. Still it sounds silent and is good.
★ Because it feels that the price is high ★ There are four evaluations.
View detail
Good performance
This Inner baffle was purchased a second time. This time it was used for Racing line of AXIS Lab Bitch because it worked much better last time. This AXIS laboratory Bitch, the sound is the best, but quite explosive. So inserting this Baffle kept the sound as it was, the sound pressure was suppressed, AfterFire was also suppressed. With End Baffle you are closing the exit with PassPass
It becomes the sound, but with this Inner baffle, the volume is suppressed and satisfaction is high without such a thing. But it is too expensive to say clearly. Rip-off. Patent fee is overdelivery. If you wish this price, make it with Titanium and put it in a wooden box and sell it. And, although it is a substitute that you want to say to see seeing the product, there is no alternative because there is no substitute. I wonder if per DAYTONA make it cheaply - - -.
View detail
Good quality
Punching part is 5 mm and wall thickness is 1. It seems to be 0 or more.
Welding of Punching and Body is also well done.
Punching is molded into a Ball shape but the material is beautiful without deformation. A beautiful paper of Pipe is attached and overall
I have a long-lasting feeling. There is no silent effect. I feel it sounds softening things. Can not create your own
View detail
MISTY Φ 70 straight pipe for misty pipe Silencer
You know, MISTY's straight tube Silencer. As it looks, it is almost straight pipe.
Large type Old Zetc. It might be good.
However, in medium-sized vehicles that are commonly used until high revs, the volume may be too high.
Or, it may be a mistake to ask Silencer for features on this product (Lol)
It seems to be a popular item, Ya ○ Out of stock was continuing in Oku. If you buy it with WEBIKE, it is free shipping and I think that it is Large change profitable.
I think that it is not a bad product, but I thought the price was a little expensive.
View detail
Exchange
It is an exchange from Small baffle to Medium baffle. Small baffle I felt missing so I purchased Medium. It is natural that the loudness is loud as the missing is better. You can withdraw in an early morning residential area. We purchased Silent Glass Wool separately and wound it on the Standard Glass Wool, but there was almost no sound reduction effect.
But it seems that it was better to increase Glass Wool, it sounds like a good exhaust sound.
View detail
Previously it was NORMAL Baffle
When exchanging Glass Wool in Silencer equipped with NORMAL Baffle,
Since Carbon was attached to it by bossi, I bought it expecting that exhaust vent would be better.
I think there is also thanks to Maintenance, but I feel comfortable breaking up.
View detail
DAYTONA Silencer End Baffle
I installed it on Silencer of custom-made AKRAPOVIC of Slip-on Silencer. I am satisfied without a beeping sound.
It is a Manufacturer that can also relieve the price as well as the price.
View detail
The volume surely decreases
After buying it passed the vehicle inspection twice twice.
The volume surely decreases. Well, of course it is natural.
If it is used once every two years it probably will be available for over 20 years.
View detail