Reviews
Ooh! It's good. ??
The direct feel of the Axel from low speeds has increased quite a bit. You can experience a sense of disconnection. ??The volume has also increased with a good bass sound, which is a little more pleasant from the gap with the too quiet appearance. ?? View detail
Baffle
It is a stable Jammers, so I have no complaints. m (__) m View detail
The stretch has been improved.
25-pi Short Baffle. I think the sound quality is better with the 25-pye Long Baffle. But the sound quality is better with the 25-pi Long Baffle. View detail
Better shedding.
I bought 22 Short Baffle because I thought 22 and 25 Long Baffle were not enough. 22 Short Baffle is better than Long Type, but the sound quality is better for commuting because the treble is stronger. I would like to try the 25 Short Baffle next time. View detail
This is my favorite Baffle!
I compared the 22 and the 25, and for me, the 25 was better. the baffle is well made, and the nut is well welded. The sound quality is good with a little bass and I am satisfied with it. View detail
The sound is awful!
The top speed is a little better due to the better exhaust gas release, but it is very noisy. View detail
It feels so good!
I replaced the Tadao Exhaust System with a WJ and tried a variety of End Baffles As a result, I settled on a 22-pie short!
The sound is noisier than the long one, but the acceleration and extension of high speed are better than the long one It was good, I thought about the sound and made 22 pies
View detail
It's well built!
I have replaced it with a WJWIND JAMMERS exhaust system to make it look more like my favorite I've tried Setting and many other things
As a result, the sound becomes quiet in the direction of Long and ZeroStart does not change the direction of Short and re-accelerates At the time, I felt the Long was more torque-full, but the high speed extension was more It became slow and stuck I even made a Big size Long that wasn't released to try and make a one-off and drill a hole in it I tried, but it didn't turn out to be a good thing
View detail
I think Long is enough..
The volume of the standard 19φ did not feel like changing the muffler, and it was not good to get out of high rotation, so buy 22φ and 25φ long. 22φ has a feeling that the volume has increased and the muffler changed. I think it is safe even at home early in the morning or at midnight home. I think that it is the best if you use it for commuting as well. 25φ further raises the volume and uses a bit of mind early in the morning and late at night. The low and medium speed are the same for both 22φ and 25φ, so the highest speed is 25φ higher so I am using 25φ. I use a short baffle if only the volume, but I do not want to drop the low and medium speed torque. View detail
Attached to Coil cone Pipe
Attached to Coil cone Pipe with 155 cc.
I also tried 22φ Short but the sound quality, medium speed range was subtle, so I bought 22φ long and installed it. Volume is not quiet, it is not noisy and it does not stress around up to the top with just the right volume.
View detail
Standard Baffle
I purchased a 25 π Short Baffle, BW'S 125 (Engine Displacement Volume125cc) - Coil used in cone.
In 19.Long Baffle of Standard, the sound was too small and I felt that Custom Exhaust was not felt, so I exchanged it for 25 π Short.
It is relatively lively sound, but I like the 25 π Short Baffle because I am a bomb sound like no Baffle.
When installing in Silencer, the size of Baffle may be tight.
View detail
Psycho ー!
I tried Standard Baffle, 22 φ Long, 25 φ Short, but the 25 φ Shot I purchased this time is pretty cool!
You can also notice vehicles while driving, and it seems that safety has increased.
Climbs of inclination 30 ° will also accelerate.
However, the dimensional precision is high and it may be hard to install considerably.
The attached Exhaust System is a Coil cone Pipe
View detail
To the scude pipe muffler of WIND JAMMERS
2015 Scyred Pipe Exhaust System of CYGNUS X-SR (WIND JAMMERS) It attached to. Idling sound is not that far, but the sound got bigger than I expected to twist Throttle. Well, I feel a bit somewhat, but is not it within the acceptable range.
Depending on the person it may be Out.
View detail
This is good
If it is Standard Bore
Included Parts : Can correspond with 19mm of
For Bore up vehicles
Setting is severe
To the original performance
I can not keep up with it
If it is about 22 mm
Balance Good performance can be demonstrated
View detail
Precise accuracy, many choices
CYGNUS X 2015 FOR JAPAN MODELMODEL
Used for ScudettoPipeExhaust System
【What made you decide the purchase?】
I was using 25 Φ Long, but I wondered what the Short Baffle is like and cut it down for a moment
Unexpectedly the volume became Large, so I panicked and bought 22φ w
OEM is 19 φ, quiet but selects 22 φ because it is a bit unsatisfactory
It was said that it would take delivery time, but webike also had inventory and immediate payment decided
【How was it actually used?】
Moderate volume to be an explosion, but also an Appeal
The elongation in the high speed range is better than 19 Φ
Since the performance of the Exhaust System itself is originally good, there is almost no decrease in Torque
Rather the response feel good to go up
Torque feeling remained also than 25 て and good blowing
I felt that this was the best if I did not modify the Engine
【Mounting was difficult?】
Since accuracy is close to Don Pissha, it is hard to get out if you do not do it with Pliers and so on for removal
Even if it does not enter it unless you hit a concon
Although I say that hang is ...
Because it is accurate, it is absolutely not entered if it is oblique so it is firmly putting in parallel and feeling pushing lightly by tapping it
【Please tell me the installation point and hang】
First, after fitting the Fixing Screw part to some extent, it takes a little time and effort after inserting it w
Although it does not enter until it gets hit with a light conch at Pitashi, it is not too much trouble because there is Clearance as much as it can be rotated by hand if it enters the fixed part
[Is there anything I was disappointed about?]
None!
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is absolutely nothing if there is such accuracy and only this Lineup!
The extent to which other Manufacturer also want to follow you ...
[Others]
Long Baffle is perfect for town rides and a little pass
Short Baffle is Circuitetc. , High rotation Spec. Is it about when I wanted to lower the volume slightly with emphasis on coming out?
Town ride Main, occasionally pass, for myself 22 L Long was ideally Don Pissha
View detail
WIND JAMMERS Long Baffle φ 25
Originally we purchased Short Baffle φ22, but it was pretty
I bought Long Baffle φ 25 because the sound went Large. The owner Rider has a good volume of furniture.
View detail
WIND JAMMERS Short Baffle
Although I bought it because of Standard's φ 19 Baffle
Quite a bit loud in the old Otter Rider In a little embarrassing again, buy another Baffle
View detail
I installed this baffle to my CYGNUS X (Japanese Model III) Coil Corn Pipe Long Wheel. It has increased sound which I'm sure is annoying to the neighborhood. But it gives great sound and acceleration speed has increased as well with no alteration. I purch
I installed this baffle to my CYGNUS X (Japanese Model III) Coil Corn Pipe Long Wheel. It has increased sound which I'm sure is annoying to the neighborhood. But it gives great sound and acceleration speed has increased as well with no alteration. I purchased Φ but I assume this is the limit because anything larger than this will probably cause too much sound to use in the suburbs.
It has WINDJAMMERS quality. A well made product.
View detail