Reviews
Fits: SUZUKI SKYWAVE 250 CJ46A, SUZUKI SKYWAVE 250 CJ45A, SUZUKI SKYWAVE 250 CJ44A
Pushing Age Quantity : 2pc
Pushing is cool with StyleDual Silencer
It is a bomb sound that is not hesitant, it is high speed, high rotation and the ear hurts.
End shape is bad and Baffle can not be installed either
Inefficient installation is required
View detail
Fits: HONDA glom
The royal road! YOSHIMURA!
If you are doubtful about Slip-on Silencer, let's choose the Full Exhaust System.
Because it is YOSHIMURAExhaust System of the corner
For Normal engine Injection setting etc etc. There is no necessity at all.
My EngineSpec. Mukawa SStage, Mukawa river BigThrottle (Power Filter) However, the setting in FI con is (F). Correction is +2 (7) It's patchy..
You can remove Baffle at Hexagonal Wrench.
My EngineSpec. In the case of Power, Power comes out,
In the case of public road use, there is noise and low speed Torque reduction, so if you like
View detail
It's all right. You get what you pay for. It's a fairly cheap pipe, I bought it to get my 74 ct70 (with 88cc big bore kit) on the road. easy to fit, looks like a stock pipe and is quiet. But less then 250km later one of the welds split and one of the
It's all right. You get what you pay for. It's a fairly cheap pipe, I bought it to get my 74 ct70 (with 88cc big bore kit) on the road. easy to fit, looks like a stock pipe and is quiet. But less then 250km later one of the welds split and one of the heat shield mounts broke free. Had it simply welded back up, annoying that it was not welded properly to start with but what do you expect for 50 bucks. If you are after something to get by with and are not afraid for a few patch welds here and there, this it the ticket. But if you are after something maintenance free, it's best to spend a little more cash and got with a better brand with better build quality. View detail
These pipes are well made,but fitting is akward because of the larger diameter pipe.The front pipe sits too low and is easily scraped on right hand cornering.They are exstremely Loud,even with the baffles in.I would think illegal for street use. Would h
These pipes are well made,but fitting is akward because of the larger diameter pipe.The front pipe sits too low and is easily scraped on right hand cornering.They are exstremely Loud,even with the baffles in.I would think illegal for street use. Would have been a great purchase,if the manufacturer had made these quieter.I had to take them off after about 20 klms View detail
Use of what was seen if it rode for a while, without the Setting from a top to lower coming out of whether to be too brief easily although this Style that seems to be short and seems to be bad was pleasing temporarily was given up.I think whether be a Set
Use of what was seen if it rode for a while, without the Setting from a top to lower coming out of whether to be too brief easily although this Style that seems to be short and seems to be bad was pleasing temporarily was given up.I think whether be a Setting since it is based also on an Engine or a carburetor, of course, but to be rather goods of looks priority in a Performance up.It seems that quality has difficulty a little compared with two companies of domestic long-established stores since paint application of a Pipe comes off easily and iron material also rusts comparatively easily although
quality of a Flange is good.therefore -- in the direction that there is no courage which says and cuts off a thing at the time of Y company, it is a Recommendation.
View detail
The 2013 model CYGNUS-X FOR JAPAN MODEL was equipped. It is satisfied although the Silencer was thinly short than expected. It was slightly more nearly sorry as me of a heavy low lover than as the heavy low for tone quality to also have loud sound f
The 2013 model CYGNUS-X FOR JAPAN MODEL was equipped.
It is satisfied although the Silencer was thinly short than expected.
It was slightly more nearly sorry as me of a heavy low lover than as the heavy low for
tone quality to also have loud sound for a while.
Although sound volume tried a NORMAL Semi-racing baffle and those without a Baffle, the NORMAL Baffle was the sound volume which is hardly different from a Normal muffler.
A Semi-racing baffle is the touch which sound volume raised a little by the tone quality of the NORMAL Baffle.
It is not so noisy.
The tone quality of those without a Baffle is quite noisy although low-pitched sound has started somewhat rather than those with a Baffle.
I whom a louder sound regarded as good as it is was also too noisy, and returned to the Semi-racing baffle.
Since the tone quality of Baffle Shiga No. 1 was good, it was regrettable.
This Muffler is unsuitable for those who desire a heavy low.
View detail
Sound is the highest. (at the time of Baffle un-equipping) I cannot think a moped. However, in the case of, an omission is too good, and acceleration has fallen. Even if equipped with the Baffle, only sound volume changed. Since he want
Sound is the highest.
(at the time of Baffle un-equipping) I cannot think a moped.
However, in the case of, an omission is too good, and acceleration has fallen.
Even if equipped with the
Baffle, only sound volume changed.
Since he wanted to avoid, that
acceleration falls has returned to the pure Muffler now.
View detail
Fits: HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA TODAY, HONDA TODAY
Although appearance was good and it has been convinced, the sound at the time of a run is noisier than imagination. When it runs to a trial, everybody frowns. DQN is wrong. Moreover, it is a remarkable nuisance to the neighbors. It is better to stop i
Although appearance was good and it has been convinced, the sound at the time of a run is noisier than imagination. When it runs to a trial, everybody frowns. DQN is wrong. Moreover, it is a remarkable nuisance to the neighbors. It is better to stop in the residential street. View detail
"Although it was attached also to the 250-cc scooter which I had ridden before, I liked a form, a balance, and sound and purchased. However, it needs processing and I couldn't bolt-on. I think that it is good muffler if the accuracy of an attaching part i
"Although it was attached also to the 250-cc scooter which I had ridden before, I liked a form, a balance, and sound and purchased. However, it needs processing and I couldn't bolt-on. I think that it is good muffler if the accuracy of an attaching part is improved. Although sound becomes larger than genuine, I think that it would not become a nuisance to the neighbors if the baffle is put in." View detail
Fits: KAWASAKI GPZ900R NINJA [Ninja].
It attached to [Webike-monitor] GPZ900R (A12). Attachment did not have the so difficult thing. Sound volume is touch with a sufficient degree, and the end buffle is also attached to the direction to worry by attachment. Having been uniquely re
It attached to [Webike-monitor] GPZ900R (A12).
Attachment did not have the so difficult thing.
Sound volume is touch with a sufficient degree, and the end buffle is also attached to the direction to worry by attachment.
Having been uniquely regrettable was that rust had floated in all four inner color, and it was regrettable although I thought that there was no problem in particular.
I think that the engine performance of a muffler itself is good.
It is a grade which is not worried with BOKO in the low speed of 4-1, and turns around the elongation from high rotation very pleasantly.
At the time of purchase, he does not forget a gasket and silicon grease.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Although the exhaust pipe is carrying out very good structure, quality of a carbon silencer is quite bad to finishing. It is regrettable because the amount of money [ the amount of money ].
Although the exhaust pipe is carrying out very good structure, quality of a carbon silencer is quite bad to finishing.
It is regrettable because the amount of money [ the amount of money ].
View detail
Although attached to an 80-cc bore up engine, an omission is touch as unsatisfactory. It may say, if it is a normal engine. Since attachment is only three bolts, it wins an easy victory. Although it was characteristic in appearance, it was fel
Although attached to an 80-cc bore up engine, an omission is touch as unsatisfactory.
It may say, if it is a normal engine.
Since attachment is only three bolts, it wins an easy victory.
Although it was characteristic in appearance, it was felt refreshed and it was liking ... Slightly regrettable
View detail
Fits: SUZUKI LETS 5, SUZUKI LETS 4, SUZUKI LETS5, SUZUKI LETS4
sound is satisfactory -- it is -- although -- it compares that it is pure and the portion of an exhaust port worries about whether rain water enters for Kami considerably.
sound is satisfactory -- it is -- although -- it compares that it is pure and the portion of an exhaust port worries about whether rain water enters for Kami considerably. View detail
Fits: YAMAHA Super JOG-ZR 3YKB, YAMAHA REMOTE CONTROLLER JOG 5SW, YAMAHA REMOTE CONTROLLER JOG 5PT, YAMAHA REMOTE CONTROLLER JOG 5EM・5BM, YAMAHA Most of the JOG(2-Stoke|50cc) whose OthersFrame starts with "SA"., YAMAHA JOG SPACE INNOVATION C 5SW, YAMAHA JOG SPACE INNOVATION C 5PT, YAMAHA JOG SPACE INNOVATION C 5EM・5BM, YAMAHA JOG SPACE INNOVATION 5SW, YAMAHA JOG SPACE INNOVATION 5PT, YAMAHA JOG SPACE INNOVATION 5EM・5BM, YAMAHA JOG ZII 5SW, YAMAHA JOG ZII 5PT, YAMAHA JOG ZII 5EM・5BM, YAMAHA JOG BJ 5XN, YAMAHA JOG 2-Stoke, YAMAHA JOG 00, YAMAHA JOG, YAMAHA JOG remote control, YAMAHA JOG
Since the rust of the pure muffler came to have been conspicuous, it had stepped on to exchange. If compared pure [ all steel ], there is a somewhat light impression. Although my motorcycle was remote controller JOG SA16J 2005 model, as it was, it
Since the rust of the pure muffler came to have been conspicuous, it had stepped on to exchange.
If compared pure [ all steel ], there is a somewhat light impression.
Although my motorcycle was remote controller JOG SA16J 2005 model, as it was, it repeated processing it, if it cannot equip but equips, and attached it at last at the 4th time.
After all, every 3 mm each of two holes were deleted.
Since the working point was aluminum, depending on the kind of file, it is got clogged, and becomes work while maintaining a file.
Since it was fairly difficult individually, I was allowed to use two stars.
Although attachment took about 20 minutes for 1 hour including processing operation time, I think that the direction to which it got used can be performed more in a short time.
As comment after wearing, it is satisfied with the quiet exhaust sound which applies pure as an aim.
travel performance is also big -- similarly it is easy to treat.
View detail
Fits: YAMAHA Super JOG-ZR 3YKB, YAMAHA REMOTE CONTROLLER JOG 5SW, YAMAHA REMOTE CONTROLLER JOG 5PT, YAMAHA REMOTE CONTROLLER JOG 5EM・5BM, YAMAHA Most of the JOG(2-Stoke|50cc) whose OthersFrame starts with "SA"., YAMAHA JOG SPACE INNOVATION C 5SW, YAMAHA JOG SPACE INNOVATION C 5PT, YAMAHA JOG SPACE INNOVATION C 5EM・5BM, YAMAHA JOG SPACE INNOVATION 5SW, YAMAHA JOG SPACE INNOVATION 5PT, YAMAHA JOG SPACE INNOVATION 5EM・5BM, YAMAHA JOG ZII 5SW, YAMAHA JOG ZII 5PT, YAMAHA JOG ZII 5EM・5BM, YAMAHA JOG BJ 5XN, YAMAHA JOG 2-Stoke, YAMAHA JOG 00, YAMAHA JOG, YAMAHA JOG remote control, YAMAHA JOG
Although it was [ that an exhaust sound is quiet and ] satisfactory, the screw hole of the manifold and silencer side did not suit, but it processed and attached it. Although purchased by made in Japan ... It was slightly shocking.
Although it was [ that an exhaust sound is quiet and ] satisfactory, the screw hole of the manifold and silencer side did not suit, but it processed and attached it.
Although purchased by made in Japan ... It was slightly shocking.
View detail
If I have a photograph seen, it understands, but I regard that the higher vehicle is different as a muffler bounding and the raising angle differing from the photograph of a catalogue, even if it yields ten steps. And since an intermediate baffle did
If I have a photograph seen, it understands, but I regard that the higher vehicle is different as a muffler bounding and the raising angle differing from the photograph of a catalogue, even if it yields ten steps.
And since an intermediate baffle did not enter, weld is deleted considerably and it was made to enter.
And attached muffler stay was remarkably short useless on the motorcycle at the time of wearing.
Although are attached using general-purpose stay, and various piping was tried, it compromised on the state that somewhere has certainly contacted and of being uninfluential, and fixed.
I consider this product as it is better to consider the KIT parts for persons which are the products in which bolt-on is impossible and which can be attached with processing or a device.
About sound volume and tone quality, I transship an engine into cub 90 normal, and become in play using PC20 for a carburetor.
I think that it is not a quiet muffler even if it puts in an intermediate baffle, and that it is the sound volume which can go by daily use enough if it is daytime although it is not a level which can run a midnight residential street.
Ear harm is not bad although tone quality is seldom low-pitched sound.
View detail
Low-speed torque is lost and the beginning is useless. To the extent that sound volume is somewhat larger than normal. It is which WR is better between 5.0x6 or 5.5x6.
Low-speed torque is lost and the beginning is useless.
To the extent that sound volume is somewhat larger than normal.
It is which WR is better between 5.0x6 or 5.5x6.
View detail
It equipped today. the design of appearance -- rather -- me -- Although it is that of ? as which liking may be sufficient .. structure .. it is quite coarse! Although it equips with a baffle since he does not like the thing in which my sound is not mu
It equipped today.
the design of appearance -- rather -- me -- Although it is that of ? as which liking may be sufficient .. structure .. it is quite coarse! Although it equips with a baffle since he does not like the thing in which my sound is not much loud .. it was not attached obediently.
If it looks at very ... The end was distorted.
Although it became wearing processed for a while by itself, it ends somehow.
The hereabouts should be improved.
I think that it is powerful! A price is cheap and it is also the maximum high speed. Because it was extended about +5 km ...
View detail
It is necessary to remove a tandem step. In my case, the semi-racing baffle is also attached, but sound with which a heavy low is effective and it was filled for a while is the feature. In an external muffler, I think that it is a quiet category.
It is necessary to remove a tandem step.
In my case, the semi-racing baffle is also attached, but sound with which a heavy low is effective and it was filled for a while is the feature.
In an external muffler, I think that it is a quiet category.
Although appearance and sound are pleasing, if it is going to start the engine, regrettably one kick pedal is likely to interfere.
View detail
Fits: YAMAHA MAJESTY 125 FI common, YAMAHA MAJESTY 125 carburetor
Sound is loud even if it equips with a baffle, although I think the structure object of the quantity of glass wool, or a baffle. Tone quality is not pleasant at touch called Beriberi, either. The main jet No. [ about ] 10 raises. (Although No.
Sound is loud even if it equips with a baffle, although I think the structure object of the quantity of glass wool, or a baffle.
Tone quality is not pleasant at touch called Beriberi, either.
The main jet No. [ about ] 10 raises.
(Although No. 5 was raised for the time being, it is still somewhat thin.) It is better to extract a pilot jet conversely.
Although I think that a style and structure are comparatively good, those who cannot do carburetor setting cannot recommend you.
It seems to be better to stop in an injection vehicle.
View detail