Reviews
Fits: HONDA GROM, HONDA GROM
nice sound
I feel that the sound changes from about 6000 rpm, and it is a nice sound that keeps me turning.
However, after one week and about 200km, discoloration and rust started to float, so I recommend applying StainlessGuard if you are concerned about it.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110
BaEves up
Installed on CROSS CUB (JA45).
I thought it was a really good time to be able to pimp with such precision without machining.
The ride quality is a bit sluggish at the start as the low-speed torque drops due to the better disengagement, but on the other hand, the increased horsepower at high speeds allows the engine to turn in a stable manner.
I think it is a long-established company that does not deteriorate, but only changes the balance of performance compared to the OEM.
Also, the vibration may be individual because of the pre-Basket attached and Custom, but the chattering vibration increased at low speeds and decreased at high speeds.
Finally the sound is Drumstick fucking cool.
This kind of thing is absolutely impossible with OEM!
Axel twisting raises ba eves, which raises my performance.
Recommendation.
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
YOSHIMURAmachine bendedR-77sCYCLONECarbon endExhaust System
The sound is a little louder than OEM, but not uncomfortable even when long touring, and the bass is pleasant. View detail
Parenthesis is good!
I knew Parenthesis was good!
The sound is a little louder than expected.
Embellishments are a little Mild!
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
Exhaust note is larger than expected.
I purchased this product based on the information on YouTube, etc., with design first, and selected the Stainless Steel Type because it has no band on the silencer part and is refreshing. However, the exhaust sound is a bit louder than expected, and it bothers me a little during warm-up operation. The acceleration is very fast and it goes into 6th gear in no time. View detail
Fits: YAMAHA XJR1300
xjr1300YOSHIMURAFull Exhaust System
Japanese Vehicle Inspection Correspondence, but the Idling is quite loud. It will be a little bit better once the warm-up process is over, but the bass sound can be heard all the way inside the house. The previous exhaust system was Beams Slip-on Silencer, but the volume at idling is obviously higher. By the way, Beams has 92dB at Idling and YOSHIMURA has 91dB, but I and my friend thought that YOSHIMURA is definitely louder than Beams. Also, I'm a little disappointed with the sound of the gurgling sound when idling....
When I started to drive, I could hear the good sound of Mr. YOSHIMURA. The exhaust pipe has been burned up nicely and I'm satisfied with the sound!
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125
Pleasant exhaust sound
Product Name
YOSHIMURA YOSHIMURA Machine Bent R-77S Cyclone Carbon End EXPORT SPEC Japanese Government Certification
Item Number
110A-525-5150
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
About 30 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
It's cheap and it's a Full Exhaust System. The rest is Brand
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult to obtain. It is troublesome to remove the exterior
How was your experience with it?
Power and appearance have been upped.
[Included Parts:were they on?
Seal, and many other things.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Design is good!
The OEM system is very lightweight and compact compared to the OEM system, and while I like the OEM system, the design of this exhaust system, including the handling, is not too strange and fits in well with the vehicle.
Sound is a little too Large? (OEM is too quiet?)
The only reason I did not give an overall rating of 5 stars is that the delivery time took 6 months Minus one star. (I know it had to be done for various reasons)
I also put on Universal's Heat Guard in consideration of Tandem with my grandson.
View detail
Fits: HONDA CT125
Heat Guard short
In the riding position, there is no problem, but if you put your feet down while stopped, your thighs will be behind the Heat Guard.
If you don't consciously get your foot in front of the footpeg, it will touch the exhaust pipe.
An Exhaust System Bandage was wrapped behind the Heat Guard.
View detail
Fits: HONDA CT125
Sound is Gentle and the best bass
I have long been considering replacing the Exhaust System after purchasing a CT125.
I like the sound of YOSHIMURA as far as I can see in various videos,
Decided on YOSHIMURA because MORIWAKI's double-layered structure seems to accumulate dirt.
I do not like Silencer shiny in YOSHIMURA,
From the two choices of Carbon or SatinFinish
Averse to buying Coating agent separately after learning that Carbon is easily degraded by heat and UV rays.
Decided on SatinFinish, which is 11,000 cheaper than Carbon.
Purchase at WeBigyahoo store during Point Redemption Festival + discount
I was worried about whether the Motorcycle Side Cover would come off easily for installation.
The nail inside didn't break, and it came off easily and saved my life.
After that, installation was completed in an hour with no problems.
The only thing I can say is that I had a hard time getting the existing Gasket and the lower Spring to stay in place.
JA65Engine surrounding code and exhaust pipe have been improved so that they do not interfere with each other and no countermeasures are required.
After the installation was completed, the engine started and I was prepared for it to be very noisy.
Amazingly quiet and heavy bass thud thud thud Gentle Idling sound
The daytime neighborhood could be warmed up without concern.
My previous NINJA400 (Muffler replacement) The exhaust sound of the stock CB400SF was considerably louder than that of the CB400SF.
However, if you pull it when driving, the CT125 may be noisy in its own way.
The power feeling is honestly the same as you can feel, which is a disappointment.
Fuel economy will be Reviewed with future runs.
View detail
Fits: HONDA MONKEY125
YOSHIMURAGP.,, Sound Psycho
[How is it used?
Touring、Customization
Was the one you received as per Image?
The quality of the Exhaust SystemBody was very good, and the silencer was very good after installation.
How was your experience with it?
When I installed the exhaust system, I thought the exhaust sound was too loud, but once I started driving, I could feel a very nice and comfortable heartbeat.
I read in a previous review that the SR was small, and that's exactly what it was. It was the right decision to buy it.
[Points to note]
Nothing in particular, Instruction Manual is easy to understand. (However, the location of the tightening Torque was confusing.) It was easy to install.
How did it compare to other products?
I have an OverRACING Exhaust System installed on a buddy of mine, but the bass sound was stronger than that.
Other items that you would like to see/Opinions and requests to the Manufacturer
The Yoshimura cyclone was the first exhaust system I purchased when I was young, and it has been almost 30 years since I installed it, but it sounds great and is still easy to use from low speeds.
Please continue to develop and sell good products!
View detail
Fits: HONDA ADV160
After all, it is a first-class Brand!
It had been a long time since I had used YOSHIMURA's Exhaust System, but the quality and the Instruction Manual for handling the system were top-notch.
The volume was more than expected? It was louder than expected, but the bass was pleasant to listen to without being annoying.
Silencer's color titaniumium blue is also well satisfied with the high quality.
The shipment came in earlier than expected and we were able to get the car earlier than expected.
View detail
Exhaust TuneUp .
Exhaust efficiency is improved and the RPM becomes Smooth.
Torque feel is good, and it's not cheap.
I was reminded again that this is indeed YOSHIMURA's Exhaust System.
View detail
YOSHIMURA Accelerated CYCLONEExhaust System?
[How is it used?
City Riding/Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
If you have the minimum tools, there is no problem, but … the space to use tools when fixing the body and SilencerSilencer bracket is narrow, so Spanner 13mm and 12mm are necessary instead of Ratchet/Socket tools?
How was your experience with it?
I thought the low speed Torque would decrease, but it was an acceleration type characteristic!
[Included Parts:were they on?
without a problem
[Was there anything that disappointed you?
The band of the Heat Guard is narrow for position adjustment, but … it could be a little wider. It's a bit unreliable ….
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110
YOSHIMURA and MORIWAKI
It was a little earlier than expected, but it was worth the wait. I have installed YOSHIMURA and MORIWAKI on JA48, JA60, JA59, and now JA61. However, I don't think it is suitable for those who don't like large volume. Personally, I think that changing the exhaust system is the best way to have a custom feeling and presence.
The OEMs of newer vehicles are not as good as the OEMs, so you can actually drive the vehicle and feel the power up.
View detail
［Tactical] CYCLONE Japan Government Certificated
Overall, Power seems to have gone up a bit,
The sound is not much different compared to NORMAL,
It is not suitable for those who care about Sound.
This is my personal opinion, but I do not expect a sudden increase in power just by changing the exhaust system.
View detail
Fits: HONDA Monkey125
Replacement was easier than expected.
First, the vehicle is mounted on a NORMAL vehicle.
The replacement work itself was completed in about 30 minutes, probably due to the fact that we were well prepared in advance.
It was not particularly difficult, but it was more Large strange to be careful not to damage the OEMExhaust System.
We packed them as we removed them.
The first impression after installing the Exhaust System is that the exhaust sound has changed to a pleasant sound.
The volume was also increased so I was more careful when starting and warming up.
When I drove the car, I felt that I had to pay attention to the clutch operation a little at first because of the change in the Torque feeling when starting. Once I got used to it, I didn't mind at all.
The high RPM extension is now dantotsu. It feels great.
The maximum speed did not change much.
Reset of intake system and Injection such as Air cleaner is not done.
I chose the carbon type and it looks great.
View detail
Fits: HONDA Monkey125
Exhaust System
It looks great and I love the sound.
It's a quintessential YOSHIMURABrand.
View detail
![[Featured]machine bendedGP-MAGNUMCYCLONE TYPE-UP EXPORT SPEC Japan Government Certificated](https://img.webike-cdn.net/catalogue/images/117905/21211_06_TS.jpg)
Fits: HONDA Dax125
Easy installation
It was a stable production.
Installation can be done with all the included parts.
Installation takes about 10 minutes.
I think the exhaust sound is similar to OEM.
View detail
Fits: HONDA CT125
ct125 YOSHIMURAExhaust SystemImpression
The Torque feeling is more enhanced than Normal.
Anyway, it is much lighter than NORMAL, so it seems to be faster.
View detail