Reviews
daytonma Exhaust Bracket For Right
About quality and texture I think the quality is really good About the feeling of use Incorrect length measurement but fitted to exhaust clamp bolts. Products to buy together An exhaust clamp with m10 bolts is required Difficulty of installation easy, simple Cost performance and comparison with other products I think the product is the best for the company that makes the exhaust, but I think it is a well-made product in various ways About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing We need to measure the length properly and choose I needed 150mm, but I chose 175mm, but 125mm was the correct answer View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
I'm all about quiet, and this is the only way.
I use it on my DAYTONA 88cc.
By sacrificing performance, it achieves a volume that is slightly Larger than OEM. This is a product that will not bother your neighbors.
The Exhaust System is made at the lowest level and can not be installed with the included collar.
View detail
MONKEY Exhaust SystemExtension Bracket
If it is produced with an emphasis on appearance, it is a little disappointing.
The Hexagon Bolt comes out of the Large Exhaust Bracket.
View detail
I'm not complaining because it's cheap.
You should definitely work on it in water.
The prickle attacks all day long.
Also, it is hard to wind the R part because it is 50mm wide.
I still feel that about 30mm is a beautiful finish.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Interferes with slightly annoying & Brake pedal
I installed it in solo of Honda.
As Custom is aimed at SteamPuncture Wind, Design is Large satisfied with Image Exactly.
However, when I tried it, I interfered with Brake pedal and I managed to install it by denting the interfering part.
I think that it is caused by the shape around Solo's unique Swingarm, so MONKEY and CUBetc. I think that you can install it without problems.
I installed it early this morning and used it for commuting, but it is still quite annoying. I had expected some shape from the shape, but I think that likes and dislikes can separate with the sound that Cocococo and Gold genus resonates.
Because I did not suit my preference, I plan to make Baffle and combine it with Gold to make it a little more mild.
However, these are not all problems of the product itself. It is very good to make for the price, but the quality of Stainless Steel is also good, it is outstanding so it is outstandingly compatible with the engine of the high rotation type Tune
I think that it is a product that I can definitely recommend it if the taste of the sound matches the type of car.
View detail
Fits: HONDA MONKEY
4 LMONKEY installed
Installed on 4 L MONKEY 88 cc KITACOSTDHeadHigh Camshaft
I used it with PC 20 carburetor, but I think that the missing is bad, it may be bathered for a Bore up car of about 75 cc.
88cc + High Camshaft + Big carburetor may be a little tough.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
It may be Recommendation other than Large Size
For MONKEY, but I installed it on the Parka 50
As it is for MONKEY, Exhaust Bracket was short and it was not useful for CUB
Sound clearly, it is noisy
Completely unraveling ○ It is a volume close to the straight pipe Sound of the family
Since it can not be helped, I bought a 44 Φ Baffle separately at Exhaust outlet and attached it
It became quiet a little, but it is still more noisy
I think that it is a fashionable Exhaust System, well built, except for Large sound of sound
View detail
CHALYExhaust System Exchange
As an entrance to CHALYCustom, I purchased this product to exchange Exhaust System. Problems occurred when trying to arrive and assemble quickly, problems occurred, incompatibility with outside Suspension was bad or attached Exhaust Bracket was unable to attach, but trial and error, as a result of detaching the Rubber inside the Silencer band and installed.
Well if this price is not it can not be helped. When I started Engine it was disappointing forecast with a lower noise, good meaning that it is not 50 cc.
View detail
exhaust sound is good, fit was right but i find the chrome and the welding a little crude and it sticks out to the side more than the stock pipe. There were small dents around the place when i got it. it's still great for the price though.
exhaust sound is good, fit was right but i find the chrome and the welding a little crude and it sticks out to the side more than the stock pipe. There were small dents around the place when i got it. it's still great for the price though. View detail
Good value for money, cheap performance exhaust with stock appearance. The chrome on the heatshield is very good however the chrome on the exhaust itself is pretty average. However for the money i expected this, all in all a great exhaust for 20% of the p
Good value for money, cheap performance exhaust with stock appearance. The chrome on the heatshield is very good however the chrome on the exhaust itself is pretty average. However for the money i expected this, all in all a great exhaust for 20% of the price of the similar takegawa equivalent, but the takegawa is flawless. Very happy with my webike purchase. Thanks View detail
I fit this exhaust to my chaly and i think that looks nice. It make a very nice deep sound and the quality of this is good.The motor go very well wih this exhaust and i like it.
I fit this exhaust to my chaly and i think that looks nice. It make a very nice deep sound and the quality of this is good.The motor go very well wih this exhaust and i like it. View detail
Welding of an Inner silencer and the Rivet stop of a Silencer are quite coarse. The way called coarse work may say. Since it is , however this amount of money, it is satisfactory enough. sound is honest than expected! if displacem
Welding of an Inner silencer and the Rivet stop of a Silencer are quite coarse.
The way called coarse work may say.
Since it is
, however this amount of money, it is satisfactory enough.
sound is honest than expected! if
displacement volume Up is carried out -- or [ so so good / carrying out sound ] -- ?
-- it is the conviction ! if it is this amount of money.
View detail
- As for a quality exhaust pipe, a part, and a stay part, a zinc antirust coating will not reach it about 10 mm, as for the band made from a stainless, if an application silencer and a silencer band attach an elastic band to product plating finishing made
- As for a quality exhaust pipe, a part, and a stay part, a zinc antirust coating will not reach it about 10 mm, as for the band made from a stainless, if an application silencer and a silencer band attach an elastic band to product plating finishing made from steel each welded place.
Bending is required.
Appearance is the touch as which slightly cheap - tone-quality low-pitched sound may be sufficient.
Sound volume becomes quite large, and although it is good daytime, it is likely to become troublesome in the residential area of night, or a tunnel.
(50 cc) I think that it is goods good considering a price although most up, such as - engine-performance torque and a speed, is only - (50 cc) synthesis sound and the styles which are not felt.
It is a recommend to a direction to carry out custom although there are no direction and budget to try variously.
View detail