Reviews
After all, Universal
The welding of the outer Flange section was messy,
ManufacturerThey were outside the published dimensions and did not fit delicately.
I was able to shave it down somewhat File and put it in.
The sound seems to have quieted down some … though,
It is best not to expect a muffling effect.
Improvement of the smell of the exhaust Gas is clearly effective, though,
It is no match for the OEMExhaust System catalyst.
It still smells even at RPMs that should have reached the reaction temperature.
We recommend that you purchase the product assuming a reduction of about half.
View detail
Purchased for the purpose of reducing volume
[How is it used?
GPR's DECAT, an external Exhaust System When I installed the PIPE, the volume was too loud and bothersome, so I had to remove it. However, it was a waste not to use it, and because it did not contain a catalyst, I purchased it as an environmental measure and to reduce the volume.
Was the one you received as per Image?
I received a Straight Pipe product identical to the description and photo.
Was the installation difficult?
In my case, the exhaust pipe OD & phi;35, ID & phi;33 was just the right size to fit inside the pipe, but there was a bend in the bore diameter on the exhaust pipe side and a weld bead on the outside of the pipe on the product, so I had to use a plastic hammer to tap it in for insertion.
Instead, it is no longer necessary to drill a separate hole for screw fastening, etc., because it is no longer easy to pull out.
How was your experience with it?
As a result, the volume was just right, not too loud and not too quiet as OEMs.
Clean performance is unknown due to lack of measuring equipment.
As a reminder
In this case, it was an external exhaust system, so we have not checked whether it will be attached to the OEM or not.
Even if it is installed, it is not expected to be compliant with vehicle inspections, etc.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I was slightly concerned about the weld Bead, but I had no problems as a result.
In some cases, it may become an obstruction and may need to be scraped off.
View detail
Volume ○ Sound quality◎Torque △
CT110 HUNTER CUB (JA65) I purchased and installed the product for
It is similar to other Exhaust Systems that Gasket must be prepared separately.
Installation difficulty is not that high.
Since this is a popular car model, many videos have been posted, so it should not be too difficult even for beginners.
Product accuracy is also good.
The Straight structure gives it a very smooth sound, but at the same time, it is a very good sound,
The volume was not as loud as I had imagined, and the sound quality was very satisfactory, with a light Titanium-like feel and no muffling or cracking.
I ran the car, but I can't deny the feeling that it is a little too loose at 125 NORMAL because it is Bore up compliant.
I am currently only replacing the Exhaust System, so I feel that I have TorqueDowned quite a bit. I think it would be better to do fuel correction after upgrading the intake side. If I wanted to, I would have to bore up to...
As for the sound quality, the sense of heartbeat is weakened.
If you want to emphasize the tokotoko feeling, I think you should choose Twin Tail or YOSHIMURA's products.
If you don't want to wear anything else or want to create a Classical atmosphere, then Exactly is for you.
View detail
Classic type
Installation was very easy. It took a bit of time to remove the no-mar, but it was a basic one-piece installation.
The sound is not so loud when Idling, but it sounds good when accelerating.
I think the acceleration from 65 km/h or more has improved, but I'm not sure if it's the sound. I think it might be the sound.
I love it!
View detail
Let's mute it.
I used it for sound deadening purposes on my vfr750r Lady Bird 4in2in1. The length is 3cm longer and needs to be Cut. The thickness is 45 pi, which is just right. The catalytic converter part is 38 pie, so I used stainless wool to prevent it from rattling. The effect of the sound deadening is good because it became a little quieter. I don't have a machine to measure the sound level, so I am just guessing, but it might be just 99db. The smell of the exhaust gas seems to have been reduced by about half, so I think the purification performance is quite good. View detail
It doesn't smell bad.
I changed from Authentication Exhaust of JMCA to a non-approved exhaust system and installed a cheap catalytic converter from Amazon because the exhaust gas smelled bad. The catalytic converter was replaced with a proper catalytic converter. View detail
It's a bit expensive, but the sutra is the same as OEM and the presence is there.
The price is a bit steep, but the product is good. View detail
Fear Prevention
I bought it because it has Rubber on the Spring and I thought it would help prevent chatter.
It was effective in suppressing the chattering sound.
View detail
emotion
Exhaust System is 60.5 pi Asahina Tube Full Exhaust System.
Exhaust gas smells bad because of catalyst-less straight pipe. Naturally, it is not popular among fellow touring drivers. When I drive in front of them It stinks! It stings my eyes!" And.
I use it for my daily commute, but even after 15 minutes, my clothes, hair, and bag are covered with the smell of gas.
The Level was understandable within a radius of 2Meter.
By adding this catalyst, 、、、、 the smell is really reduced!
I feel 95% less! I'm not lying!
Since the catalyst itself is effective only after it is heated, it smells immediately after startup.
But after two minutes of driving, you'll be amazed. The smell of gas is gone.
I was really impressed with 、、、、 how comfortable it is not to smell the exhaust Gas.
It is not a Baffle and has almost no muffling effect.
Idling has only removed some of the cadence of the sound. (The volume remains the same.)
Power down is almost imperceptible.
However, it is definitely in resistance, so it should be falling numerically.
And yet it has a reliable deodorizing effect. It is wonderful.
I really, really recommend it to anyone who has a problem with exhaust Gas odor. It will make a drastic difference!
A little expensive, but considering the effect, it's a small price to pay!
View detail
Stainless Steel Spring
I bought it last time and installed it, but on this touring one of the Springs was missing. I've been pulling on it a lot, so I can't imagine it coming off, so did it break? I hope it will not go missing this time. View detail
To prevent squeaking
I was looking for a replacement for the exhaust spring because of the rattling noise and this product came to my attention.:1 Set of 10pcs. is enough for you to stock if you have extra. The heat resistant rubber will reduce the vibration and rusting sound. View detail
Good. ♪
Stainless Steel, no resonance and cheap.
No complaints at all.
View detail
Stainless Steel Spring
I bought this because I installed a different silencer this time and the spring length doesn't match. I'm happy with the Large variant because it's cheap and good quality. View detail
Installation is easy
When I first switched to the external exhaust system, I felt something was too loose and the lack of a catalyst bothered me, so I bought it, though it was a bit expensive.
I can't explain the specifics, but it felt good...no more explosions from the exhaust system, no more stalls and no more driving discomfort.
View detail
It's a universal product, but it's a good one, and it's a great cosmetic!
I put Mr. Earls Gear's BurnCLASSICSingleS on the Z900RS and it was quite cool and the sound was crisp without saying it, but I changed it to Mr. OUTEX's barrel-shaped aluminum silencer for my taste and volume.
It's great! The volume is a little loud. (On a scale of 10, 5 for OEM, 6 for Earls Gear, and 7 for OUTEX) I am satisfied with the appearance of this product, and I am also satisfied with Large.
Best of all, it's cosmo! I'm very happy with it. But I installed it forcefully. It seems that the mounting Bracket should be changed. Although the spring hook of Silencer was not attached, when I instructed the installation position to Mr. OUTEX and sent it, I had it sent back quite soon. They were very kind.
The car won't pass inspection, but it will be easy to just replace the Silencer.
View detail
Easy to use
YOSHIMURA's exhaust system has deteriorated and the sound became large Replacement
The ban on going out of the house was lifted due to the New Model Corona virus infection is fun!
View detail
Is the durability good?
I used it for WR SilencerOH used in Race. It is the second Repeat.
Although there are people who substitute Stain Wool such as 100, it is recommended that you purchase exclusive items as well.
Heat resistance is different and it is easy to wind without gaps. Especially OUTEX 's Stain Wool is wrapped like a gumte, so it is easy to wind up pulling. Although I took Wool for the last round this time, it seemed to be used still more! Although Glass Wool was scorching, it never faded away and the function of Stain Wool was played well!
We recommend outdoor, gloves, Mask as fine scraps come out when winding.
And if the price is a bit cheaper ? ? ? I think.
View detail
It is a wonderful performance.
We installed the LCIExhaust System on the Deer bell in 2016. Because it became a catalystless, I was concerned that exhaust gas Gas while driving was quite odorous.
After installation it became the smell of OEMExhaust System Level!
The volume does not change much and I feel it is somewhat VolumeDown! Power was feeling a little Mild! The installation is completed by Small machining.
View detail
I am pleased with the attachment.
To ZrX 1200 R - It is used with a combination of HeatMagic 4-2-1 Full Exhaust System.
φ60. It is really attached to 5.
About half a year after installation, traveling about 5000 km.
Feeling a slight missing of medium and low speed when it is a conventional full straight.
Us vehicles - It seems that it was compatible with Full Exhaust System.
The characteristics after installation became able to be misplaced.
It became a feeling that the medium low speed Torque gushes out with a morimori.
However, it can not be denied that a little sacrifice at high rotation.
Just high rpm is not what you use
Originally it was easier to ride with Torque type Engine
I was told that it was exactly right for me that the town ride & Winding is the main.
The fuel economy was slightly Down.
I think that I will probably keep using it as it is.
I wonder if the price setting is a little lower, I think this evaluation.
View detail
Earth friendly to the environment but yet Race ish! Honeycomb Catalyzer
I do not own it now, but I installed it in the ZXR 400 that I was riding the previous time.
There was a slope in front of the transferring house and the sound of Sansei RACING's Exhaust System seemed to be a little noisy, so if I was looking for something there was a way to the Catalyzer here.
Since it was a size that fits within the intermediate Pipe, I stopped Screw to the Silencer installation side and cut the contact part.
It was like a honeycomb structure, actually installed and ran, but it became Torque fully, the sound was suppressed more than before, and the exhaust became Clean and two birds, one bird with one stone.
The current Owner is also surprised by the change Large satisfaction !!
ZXR 400 L of LaserReplica pretends era and runs through the streets to Clean.
I was glad that I did something good.
Depending on the model, processing is also necessary, but I think that I would like to spread to the public as one of the custom parts.
View detail