Reviews
METAL…GEAR…
It was my first time to know about this Manufacturer, so I bought it in the spirit of Challenge.
Well, to be frank, it was cheaper than other Manufacturers. (Lol)
Was the one you received as per Image?
Expected
Was the installation difficult?
It was totally Large sturdy.
[Included Parts:were they on?
OEM Gasket was in the box. I'm happy about this.
[Was there anything that disappointed you?
Instruction manual is not included. Therefore, I did not know the order of packing etc. between exhaust system and bolt nut which is put on the body, so I installed it properly.
The installation point and hang/ It's a pain in the ass, but it's easy except for removing the side cowl and O2 Sensor ….
Availability and comprehensibility of Instruction Manual/No Instruction Manual If you are not sure whether you can install it by yourself, you can install it at the Shop.
Note/Expectation HaGap's comment on the order of installation of Packingetc.
Useful items that should be purchased together/Spring hook
Opinions and requests to Manufacturer/maybe the same for other Parts? "Instruction Manual should be included".
View detail
Manufacturer choice is importantLarge
Only the center stand stopper and the middle pipe are decent! The Silencer end and middle pipe have exhaust leaks. You have to be able to separate the cheap from the bad! View detail
Is it just about weight reduction and appearance?
After the previous Impression, I noticed that using the Center Stand is easier, and the engine seems to blow better. The waste leak is the same condition as the Single Muffler's Impression. I think that the manufacturer is not inspecting the exhaust for leaks, etc. I think it is just a design and weight reduction. I have installed Sansei Racing's Full Exhaust System Pai Exhaust System on my GSX more than 35 years ago, and I could use it without any problem. The technology must be more advanced than back then, however, the quality of the product is still very poor. Well, it is cheap or not so cheap. Since the intermediate pipe can be used, it would be better to think of it as a one-foot peg for Silencer replacement. Would it have been better to eat barbeque? I would like to tell the manufacturer to do a better job. Please don't think it can't be helped because of the low price. View detail
Don't ask too much of the 250 Slip-on Silencer.
Power seems to have somehow increased. It may be because it became lighter. By the way, the acceleration power from the 6th gear of 30 km was improved. Because it became lighter, it became a little easier to put the car in bed. The price is cheap, and if it is design-oriented, it is possible. However, the height of the exhaust system was not exactly right, as you can see in the advertisement photo. I guess we have to compromise as much as we can. There is a little exhaust leakage from the gap where the Silencer is wrapped with Stainless Steel. I am thinking of filling it with liquid Gasket. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
Recommended for those who prefer a noisy exhaust sound.
I purchased a New Model catalyst equipped MODEL in December 2022. I bought a new model model with catalytic converter in December 2022, but no external exhaust system was available. I found METAL GEAR and decided to buy it immediately. I decided immediately. However, I heard that it is compatible up to the previous model. The body structure is exactly the same, so I asked if it was possible to assemble it.
The bag footpeg plate is easy to install.:2pc. The Exhaust System was installed with a needle Gold Hanger. I was able to install it with a needle Gold Hanger.
The exhaust noise is loud, but quieter than the loud noise of a 400 or 1000. I feel sorry for the neighbors early in the morning and at night.
The Torque feel at low to mid speeds has improved to the point where it can be felt.
I don't know about high speed, maybe it hasn't changed? In one section, it was 10km/h faster than NORMAL.
After Fire.
View detail
Inaccurate, poorly made
The silencer of the exhaust system, which arrived brand new, was mysteriously left unpolished and covered with rust. The hole for the center stand stopper is too small to fit even the stand damper. I have no choice but to re-drill the holes in the bracket and repaint it! I will have to re-drill the holes in the bracket and repaint! 。 If you're a PRO, let's make it right! View detail
Accuracy is problematic.
The exhaust system I purchased came in, but the finish of the exhaust pipe was so crude that I thought it was brand new. I had to have it replaced. The new exhaust pipe was better than the first one, but was it Chinese quality? The replacement exhaust pipe was better than the first one, but it was not the quality of a new one. I think it would be better if they were made a little more carefully. View detail
So easy to install!
I chose this product because of its low price, one-pipe spec. and the abundance of Included Parts:Large, carefully packaged, and the parts were individually packaged for easy confirmation.
I was a little anxious about replacing the exhaust system for the first time, but I had no trouble at all because the instruction manual included a detailed description of the removal of the OEM exhaust system and the positioning of the washers. If I may say so, the shape of the center stand stopper has been changed, and the parts to close the Left Side Exhaust System have been installed in the same time line.
The exhaust sound is OEM+α with the baffle on, but not unpleasant while driving, and it is quite good. I have not had much experience in listening to and comparing other exhaust systems, but it is not unpleasant sounding. It is loud enough to drive in a residential area in the morning if you don't blow it.
View detail
Too many exhaust leaks.
I chose this product because of its low price, one-pipe spec. and the abundance of Included Parts:Large, carefully packaged, and the parts were individually packaged for easy confirmation.
I was a little anxious about replacing the exhaust system for the first time, but I had no trouble at all because the instruction manual included a detailed description of the removal of the OEM exhaust system and the positioning of the washers. If I may say so, the shape of the center stand stopper has been changed, and the parts to close the Left Side Exhaust System have been installed in the same time line.
However, Silencer's exhaust leakage is a troublesome Level of Large. There is a large gap under the baffle on the end side, and the exhaust leaks out from this gap to the Large level. If it was only the end side, it would have been good, but there is also some leakage from the bottom of the inside side, and although not as much as the end side, I feel quite a lot of wind pressure.
Of course, the seam between the middle Pipe and Silencer leaks, so I'm sealing it with Holtz Fire gum, and I'm currently looking into SilencerBody leaks, but I can't find any way to fill the gap so far, so I'm using Holtz Gap for Exhaust System. I will try Pate and if it doesn't work, I will give up.
In general, this is an inexpensive exhaust system, so it is a product for those who can afford it. Do not expect too much.
Oh, and lastly, the sound, with the Baffle on, is OEM+α but not unpleasant while driving, and it's quite nice to hear from behind. I have not had much experience in listening to external exhaust systems, but it is not an unpleasant sound. It is loud enough to drive in a residential area in the morning. However, I have not tried to remove the baffle because it is press-fitted and cannot be removed. What a mess.
View detail
METALGEARFull Exhaust System
I'm not sure if it needs some work to be installed. I'm not sure if it's an individual thing or not, but it's a very nice bass sound from low speed that I was expecting. View detail