Reviews
Good manufacturing, as good as OEM.
It can be tightened with confidence.
It is well made, so let's tighten it up with a proper Band.
View detail
Fits: KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400SE
Recommendation for volume and sound quality purposes
I don't know about the output, but the sound has changed considerably.
Not so much immediately after installation, but after driving for a while, it becomes quite powerful.
View detail
Installation super kan tan, sound exciting.
After removing the OEMSilencer, it was installed with a pop. The driving sound is sensual. I am very happy with my purchase. The good thing is that Webig had it in stock so I received it right away. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Excellent response.
This time, I noticed that the new one was defective and after installing it in the vehicle, I replaced it with a new one.
I had them send it to me and I was able to get it fixed. It is only a sticker, but it is true that the sticker was peeling off, so I asked them to take care of it, even though it was a hassle.
View detail
Fits: YAMAHA WR155R
WR155R Full Exhaust System Comparison
I had been using the inexpensive PROLinerXR-1, but it was so loud that I thought my ears would break if I used a tunnel, etc., and the silencer was cut, welded, cut, or jointed with the middle pipe in one piece. The volume is quieter than the XR-1 with the attached baffle, but I think it is in the Large category. However, with the inner baffle attached, it is easy to muffle the sound. In addition, the XR-1 stalls around 7000 rpm when the VVA starts to take effect, and the gas is obviously thin, but there is no such phenomenon and the engine runs smoothly and powerfully from top to bottom without any stress. The price is comparatively inexpensive, and we recommend this product to those who can endure until it arrives in stock. View detail
Style& sound is perfect!
I bought a CROSS CUB instead of a CT110 HUNTER CUB to install the CABTON Exhaust System!
It looks great, just as we wanted it to.
Sound is also light.
View detail
Yoshimura Magnum Carbon
셀프 장착 가능하고 소리너무 좋습니다 내바이크가 아주 다른바이크가 되엇습니다 너무 마음에듭니다 강력추천 드립니다!!!
구조변경만 되면 아주 좋을듯한데 무리없이 될꺼라생각합니다!!!
About quality and texture
About the feeling of use
Products to buy together
Difficulty of installation
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing
----------------------------------------------------------
You can install it yourself and the sound is great. My bike has become a completely different bike. I like it so much. I highly recommend it!!!
It would be great if the structure were changed, and I think it will be done without problems!!!
About quality and texture
About the feeling of use
Products to buy together
Difficulty of installation
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing
Powered by Google Translator
View detail
Fits: KAWASAKI ZZR1100 C type D type, KAWASAKI ZZR1100 C type D type
Perfect fit
This exhaust is beautifully made, the lightness of the titanium and carbon is exquisite, The fit is so perfect and it allows access to the oil filter for service and you can keep the centre stand. I'm delighted with it, my ZZR rebuild is complemented by this excellent exhaust, The carbon cans match my carbon Dymag wheels perfectly. View detail
Misty Kan
Looks and sounds great.
I was very happy with the delivery date, which was about 3 months early!
View detail
Style changes in about 10 minutes of installation work!
We are satisfied with the OEM Sound, so we replaced it with Slip-on Silencer, which is an easy replacement.
I feel like I am somewhat soaked and Sound has changed!
View detail
bass
Mounted on GORILLA.
A heat guard can also be attached to the GORILLA by fixing it to the stay on the rear side with a bolt that matches the 1cm collar.
The bass is most pleasant.
View detail
Genuine Akrapovic Link Pipe for Ducati Monster 2021
There was a small issue with the fitment of the exhaust and needed other options for comparison purposes. It would be used in one way or another anyway. Yes, these are not particularly cheap but they are well worth the money. Fiinding the right link pipe was straight forward by using Akrapovic schematics and searching model of bike. When I got this part number, I searched Webike and there it was. Luckily, this was on sale at the time and cost less than I could get locally. I had some parts already in my basket and got them all shipped using EMS to save funds. The order arrived in 5 days as always totally perfect and no issues. The link pipe came in the Akrapovic box and was very well padded inside. The pipes were all very well made and the welds are super clean. You do get all the attachemnts you need to add thte the existing pipe so no need to worry. I needed to try a different version of the link pipe as the one on now does not sit right and causes some scuffing to the pegs. This one seems to be working better than the original one so this was of course a great purchase. Thanks Webike, very pleased with all your hard work. View detail
Looks good
The silencer band looks good and fits well my Yoshimura Cyclone Carbon fiber exhaust. I am very happy to have bought this item View detail
Genuine Akrapovic Heat Shield for RSV4 2020
This was a replacement heat shield that I needed for the RSV4 2020 that got a little damage after a small spill. The exhaust was perfectly fine but the heat shield took some scratches and looked bad. Finding the right one for this model bike was super easy as I just searched for the bike and then the brand I wanted into Webike and thisd came up. Very good on price too and slightly cheaper than could be sourced locally. I did have a couple of other small parts in this order too and shipping them all together saved on cost. My order was shipped using EMS and arrived safely in 5 days. The packages in side the box were very well padded and there were no damages to anything inside. This heat shiled is a carbon fibre one and although they are very tough, you still need to be careful not to scratch the outer coating. The heat shiedl itself is a gorgeous piece of craftsmanship and looks absolutely stunning. The weave is precise and the finsih is super glossy. The fitment was a piece of cake and went on smoothly and without a hitch. As I said, there was nothing badly damaged with the exhaust, it was literally a few scratched that would not buff out. Very happy with how this now looks and the bike is back to how it should be, pristine. Great work Webike, thank you. View detail
Good design, sound and build.
[How is it used?
・Touring (Almost Winding)
Was the one you received as per Image?
The texture was just as wonderful as it looked in the pictures.
The welding of each part is also beautiful.
Was the installation difficult?
The dimensional accuracy of each part is excellent, and if you read the instruction manual, you can install without any deviations. (I think it is more difficult to install than Up type in terms of work space.)
We recommend that you check the torque of each part in the separate service manual for installation.
How was your experience with it?
Not only is the Design great, but it plays a motivating Sound!
I think the volume is just right.
There is a sense of increased acceleration compared to OEM, and no drop in low-speed Torque.
Items that should be purchased together
Exhaust Gasket should be purchased separately and replaced with a new one.
View detail
Exhaust System
I didn't like it because it was too big OEM, so I replaced it.
Happy with Slim
View detail
No problem
Today, he's going on a long trip, so we're actually going to put it on and drive.
As I mentioned in my previous impressions, yes, it seems to work on the 8BK without any problem.
For the sound of the explosion, I put a lid on the baffle and drilled a dozen holes about a millimeter across with a Drill.
The performance may be far from what it should be, but it will not be good enough.
We were able to get the sound down to the certified level.
Sound quality is... ・ Grom's Yoshimura muffler sounds better. sweat
Well, I like the shape.
The sound is louder than normal, which makes it easier to drive, clutch meat, etc.
I'm going to ride with this for a while to see how it goes.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Genuine Kitaco Exhaust Gaskets for SUPER CUB 50
These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
The old MODEL should have been good, but the new MODEL is also quite good!
YOSHIMURAR77S mounted on vstr 250sx
I really wanted the old model design, but they didn't have it in stock, so I bought the new one.
My impression when I put it on was Sound, which reminded me of the YOSHIMURA I wore in my youth.
It is a single cylinder Motorcycle, so I am satisfied with the thumping feeling.
I am glad that the design matched the car body when it was installed.
The improvement in power can be felt very much at 5.6000 rpm in the middle speed range!
Demerit, when starting, especially with a tandem or a lot of luggage on board, I felt that the start was slower than in NORMAL.
The other thing is that After Fire is now missing more, so it happens when Downshift or when I move Access back.
Well, After Fire occurs even in NORMAL, but it's hard to hear because of the sound deadening wall, so it's not a particularly large problem.
I feel that with Carburetor Vehicles, I can reduce the amount of fuel by thickening the fuel a little....
The only other thing is that the Installation Manual was a little difficult to understand in some parts.
The rest of the details will be available on YouTube.
View detail
Great
The packaging is meticulous.
Installation is easy, requiring only a hang to peel off the old Gasket.
After the installation, a test run showed that the Torque is increased in the entire area.
It makes you want to turn it. I will turn it.
However, it is a little noisy when the Axel is opened to a large size.
When opened modestly, it accelerates reasonably well and is quiet.
Although these are expensive parts, they are carefully crafted, and you will feel a sense of ownership.
View detail