Reviews
Design is good!
The OEM system is very lightweight and compact compared to the OEM system, and while I like the OEM system, the design of this exhaust system, including the handling, is not too strange and fits in well with the vehicle.
Sound is a little too Large? (OEM is too quiet?)
The only reason I did not give an overall rating of 5 stars is that the delivery time took 6 months Minus one star. (I know it had to be done for various reasons)
I also put on Universal's Heat Guard in consideration of Tandem with my grandson.
View detail
What's with the mysterious OEM ring guy? For those who wonder...
The mysterious OEM parts were too mysterious for me, and I thought they could have been a little better. I was wondering if there was anything I could do to improve the performance of the car, and I found a steel plate that came with the Exhaust SystemDesign, so I bought it, It is only for dress-up. View detail
Decent Exhaust Spring
Used for external exhaust system of GSX1300R GSX1300R HAYABUSA
When the exhaust system was replaced with an external exhaust system, the chatter sound of the Gold genus became more loud when the RPM was raised, so it was introduced as a countermeasure against resonance/interference noise.
This product is a type of spring whose Hook rotates freely, just like the springs that come standard with AKRAPOVIC and YOSHIMURA.
It also comes with a Rubber for sound control.
(Although it is shiny and the texture is not so good.)
It seems to have good heat resistance for normal use, but if it is pressed against Cowl or other parts and directly hits the exhaust pipe, it will melt, so care is required.
The spring itself is SUS with a relatively large wire diameter, so it can be tensioned firmly and is rust-resistant and solid.
The Spring is generally as it looks, but one thing to note is the installation length.
Size100mm" means the free length is 100mm.
Note that Tension is not applied unless it is used with some extension.
As per Q&A, it seems that the mounting length is intended to be 120mm.
I tried to install it, but it was a little loose, so I went with the company's M size. (85mm) I bought a new one.
Neck would be the price.
I understand that it is a solid product, but it is a little expensive.
A 4-cylinder Full Exhaust System uses more than 10 springs depending on the type, so the spring alone will cost more than 10,000 yen.
It's a little tough, as you'd expect.
However, the product is solid, and from a quick search, it seems that this size cannot be diverted from AKRAPOVIC or YOSHIMURA's Repair products, so it would be the best solution for those who seek quality over cost.
View detail
It takes quite a while to reach the..,
I had heard rumors that they are a manufacturer with a long delivery time, but I wonder how they are doing as a manufacturer in this day and age if it really takes this long. It is not like electronic parts.
As a result, satisfied with the product.
Outside of supported model year (2BL-PC40) Screws can also be fixed to the limit. However, there is some interference with Cowl and Rear Sets. (Exactly with no Clearance) 。
View detail
Fits: HONDA CT125
Heat Guard short
In the riding position, there is no problem, but if you put your feet down while stopped, your thighs will be behind the Heat Guard.
If you don't consciously get your foot in front of the footpeg, it will touch the exhaust pipe.
An Exhaust System Bandage was wrapped behind the Heat Guard.
View detail
It's cool!
I replaced the normal exhaust pipe because I didn't want it to become rusty in the future.
This is a combination with YOSHIMURA.
It has changed to a nice color after only a few rides.
View detail
depend on the person
I think the level of satisfaction depends on the person and Style.
In my case, the noise was so loud that I had to switch back to OEM.
If you are a young person, it might be just right.
View detail
Fits: HONDA CT125
Sound is Gentle and the best bass
I have long been considering replacing the Exhaust System after purchasing a CT125.
I like the sound of YOSHIMURA as far as I can see in various videos,
Decided on YOSHIMURA because MORIWAKI's double-layered structure seems to accumulate dirt.
I do not like Silencer shiny in YOSHIMURA,
From the two choices of Carbon or SatinFinish
Averse to buying Coating agent separately after learning that Carbon is easily degraded by heat and UV rays.
Decided on SatinFinish, which is 11,000 cheaper than Carbon.
Purchase at WeBigyahoo store during Point Redemption Festival + discount
I was worried about whether the Motorcycle Side Cover would come off easily for installation.
The nail inside didn't break, and it came off easily and saved my life.
After that, installation was completed in an hour with no problems.
The only thing I can say is that I had a hard time getting the existing Gasket and the lower Spring to stay in place.
JA65Engine surrounding code and exhaust pipe have been improved so that they do not interfere with each other and no countermeasures are required.
After the installation was completed, the engine started and I was prepared for it to be very noisy.
Amazingly quiet and heavy bass thud thud thud Gentle Idling sound
The daytime neighborhood could be warmed up without concern.
My previous NINJA400 (Muffler replacement) The exhaust sound of the stock CB400SF was considerably louder than that of the CB400SF.
However, if you pull it when driving, the CT125 may be noisy in its own way.
The power feeling is honestly the same as you can feel, which is a disappointment.
Fuel economy will be Reviewed with future runs.
View detail
Performance up, but
It is a Level that can be installed without going to a Motorcycle shop, although it requires careful handling and installation of the O2 Sensor and the lower part of the vehicle body.
Acceleration is a little better after installation. The maximum output is increased, but it is not as smooth as the OEM.
It would be nice to be able to lower the Rear weight for FrontHopper.
As a precaution, the exhaust noise is 3 to 4 times louder than OEM by feel. Be careful not to disturb others.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Focus on appearance
[How is it used?
Purchased for 4Lfor MONKEY.
I was looking for a down type muffler because the exhaust system and carburetor seemed to interfere with each other when replacing the carburetor.
Among them, I bought this product because it looked cool and was reasonably priced.
Was the one you received as per Image?
The color and shape were exactly as shown in the Image.
Was the installation difficult?
It is not difficult.
At first I thought the exhaust bracket was not long enough, but I was able to install it by installing the bracket near the with Gasket very loosely and tightening it after applying the bracket. I am glad that I was able to install the bracket, although I feel that it is not the perfect size.
There was no Instruction Manual for handling, but it was Large sturdy.
How was your experience with it?
I chose it for its looks, but when I actually installed it, I thought it was even cooler than I had expected.
I'm a little worried that the bracket part is not the right size, but so far I have no problem with it.
The sound was quite loud. It's not like an explosion, but the sound was on a level that might bother the neighbors.
I would have liked it to be a little quieter.
[Included Parts:were they on?
There were none in particular.
[Was there anything that disappointed you?
The size of the product is not Exactly, and there was some uneasiness when installing the product.
It is a conforming product, so it should be fine, but I wish it had a more Exactly feel to it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
Fits 8BK
From shipments after November 2023, 8BK I bought it because it became compatible with the type of vehicle. (7.89kg) Lighter weight (2.9kg) Gasket is KITACOGasketY-06 (XY-06) Used. The first installation had an exhaust leak, so we used liquid Gasket. The O2 Sensor was also troublesome. When installing the O2 Sensor, I did not follow the manual, but installed it after installing the O2 Sensor and assembling everything together and installing the Spring as well. View detail
Fits: HARLEY-DAVIDSON all models of vehicles
without deformation
Large is a great product because it can be used for a long time without deformation, but I think the limit is up to reuse. View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
Perfect fit, quality product
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too. View detail
Replacement is easy and quite goodSound
Installation was a simple process with Instruction Manual.
Sound is also quite good.
Design-wise, I think the Red Emblem is better than the Black one.
View detail
Pretty good Sound
[How is it used?
Was the one you received as per Image?
Was the installation difficult?
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Slip-on Silencer Replacement
Slip-on Silencer replacement is easy.
Exhaust System sound is not too loud and comfortable.
View detail
Fits: HONDA MONKEY125
YOSHIMURAGP.,, Sound Psycho
[How is it used?
Touring、Customization
Was the one you received as per Image?
The quality of the Exhaust SystemBody was very good, and the silencer was very good after installation.
How was your experience with it?
When I installed the exhaust system, I thought the exhaust sound was too loud, but once I started driving, I could feel a very nice and comfortable heartbeat.
I read in a previous review that the SR was small, and that's exactly what it was. It was the right decision to buy it.
[Points to note]
Nothing in particular, Instruction Manual is easy to understand. (However, the location of the tightening Torque was confusing.) It was easy to install.
How did it compare to other products?
I have an OverRACING Exhaust System installed on a buddy of mine, but the bass sound was stronger than that.
Other items that you would like to see/Opinions and requests to the Manufacturer
The Yoshimura cyclone was the first exhaust system I purchased when I was young, and it has been almost 30 years since I installed it, but it sounds great and is still easy to use from low speeds.
Please continue to develop and sell good products!
View detail
It's nice with a good bass effect.
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
It was sent packaged Beauty in a Corrugated cardboard box.?The Titanium looks beautiful and meets my expectations.
Was the installation difficult?
It took about 30 minutes.
How was your experience with it?
The volume and sound quality of the Exhaust System while driving was not too loud, but I felt it was a nice sound with a good bass.
[Included Parts:were they on?
It was a Type that could be installed without using Gasket.
Silencer hanging Band is included.
The mounting screws are the same as those used on the OEM Exhaust System.
[Was there anything that disappointed you?
Not particularly
The first purchase we received had a Trouble and we asked for a replacement. The response was fast, and we received detailed information from Support on the progress of the response, so we were able to wait with peace of mind until the replacement arrived.
I am glad I bought it at WeBig.
View detail
Sound and Style are both excellent!
We were looking for an exhaust system that would not ruin the OEM style of the DAX125, but still give it a custom look, and this is exactly what we got!
The exhaust sound is like that of a medium-sized air-cooled single-cylinder motorcycle, with an increased thumping sound and volume, and the engine now revs to a higher rpm!
One point that is a bit of a concern is that the installation angle of the StainlessHeat Guard has a slight gap with the Silencer section, even when adjusted (this may be an individual difference). (This may be an individual difference...).
Also, Silencer heat during Tandem is not so much and should not be a problem as long as it is not in constant contact.
I want to Plus the OEM cuteness of DAX with the Parenthesis goodness! Want to enjoy the thump of a single cylinder! We especially recommend this model to those who want to enjoy the thump of a single-cylinder engine!
View detail
External Exhaust System
It sounds a bit Large, but looks Cool. View detail