Reviews
Fits: HONDA CB250F MC43 all models, HONDA CBR250R MC41 All models, HONDA CRF250 L MD38 All models, HONDA CRF250 M MD38 All models
Purchased for PowerBox installation
Purchased for PowerBox installation.
One piece is all that is needed.
I had a hard time removing the old Gasket.
The new one, after applying liquid Gasket.
If it is attached, it will not come off.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used to replace CRF250L Exhaust pipe
CRF250L 2023MODEL.
SP Tadao Used to install PowerBoxPipe
It was difficult to remove the Gasket that was originally attached.
After positioning with liquid Gas when installing to prevent them from falling out.
Exhaust pipe installed.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used for CRF250L MD44
Silencer and Exhaust pipe were removed once for repair and Gasket was replaced.:I think it is a bargain since it was priced at 1 set of 2pcs.
If I were to raise a complaint, it would be about the Quantity:2pc. When will the day come when we use Set eyes… and
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
usually
I don't know because I had it installed, but I wish it had been included with the purchase of the exhaust pipe. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
For exhaust manifold replacement
Used to replace the exhaust manifold with SP Tadao
It was difficult to remove the OEM Gasket, but the installation itself was not that difficult.
I checked the exhaust leakage after one month of installation, and there is no leakage and no problem.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
When replacing the Exhaust System
[How is it used?
It was used for Exhaust System replacement.
Was the one you received as per Image?
As per Image.
How was your experience with it?
Not too much, not too little. Excellent cosmetics.
[Points to note]
None in particular
How did it compare to other products?
I have not used any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
It's a good deal
I purchased this product for Exhaust System replacement.:1 Set of 2pcs. is a great value.
1pc. is kept for maintenance.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used for MD47
It worked without any problems. Costa rica is the best. View detail
We're going to re-evaluate.
This is a re-review of the replacement of the UniversalExhaust System.
I replaced the Baffle with the UniversalExhaust System, which allows you to detach the Baffle.
Without Baffle, you can get great torque near the revs, but the torque will be thinner in the low and middle rpm range.
This exhaust system of WR's has the torque feeling of Level with Baffle of UniversalExhaust System at low and middle rpm range and the power feeling without Baffle of UniversalExhaust System near the revs. Exhaust System1 pc and the whole area is Torque fully.
The only drawback is that the sound is too small.
This would be great if it was close to 94dB.
After all, a proper manufacturer's exhaust system has great characteristics.
This exhaust system is the best for those who prefer a sound that is not large.
View detail
Cost performance is very good
I bought a used CBR250R and it came with it from the beginning, so I don't know the difference between it and the OEM, so I'm definitely not sure Write in values
The one on it is the one with the Titanium browning
About Sound
The sound pressure is not too loud, but the sound can be heard while driving The sound is like a single cylinder The sound quality is a dry sound Durrrrrrrrr! and pleasant sound quality
It feels great both when running in a relaxed manner and when the rpm's are raised on an aggressive basis I had thought there was no way a single cylinder could beat a multi-cylinder engine in terms of comfort, but I was overturned It's a nice sound Personally, I prefer a more subdued sound, but it's still a good sound
Performance
The valley of the Torque blows cleanly through to 10,500 rpm in the red zone without stress I got the impression that there is no Torque for the number of revolutions on the Flat... unless you're looking at Tachometer Sometimes it revs up, that's how good it is, the CBR250R itself has that kind of performance Maybe
Price
I didn't buy it because it was with me from the beginning, but if I did, I would have bought it for this price I have to say that Performance is high I don't think it's a bad buy
General Comment
Sound, performance, looks, nothing to say! Personally, I like the end of the end, like the BEAMS R-EVO, because I like the browning of the end as well If I get tired of this exhaust system, I might change it
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
When replacing the exhaust pipe
CRF250L and SP Tadao's PowerBox (Exhaust pipe) I bought it when I installed the No exhaust leaks, of course
Quantity:1 Set of 2 pcs. With Quantity:2pc. I'll keep it as a reserve though I don't seem to use the second set for a while
I would be happy to sell it for 1pc. only
View detail
Fits: HONDA CB250F, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
Five Check Exhaust System!
NameValue Enough MORIWAKI tube!
I was experiencing the MORIWAKI pipe with the test car of the MC 41 Initial Model, but this product is a bit different!
Speaking of MORIWAKI pipe, it seems like a bad Exhaust sound, but this Full Exhaust System is different! In a regular rotation range, while showing the Aftermarket parts likeness, the texture is elegant. Neighborhood is not annoying explosion, there is not excessively heavy bass! But, as you go around 8000 turns without a jammed Stress, its sound is beautiful Race ish Sound!
The MC41's single engine plays an exhaust sound that highlights the continuous sound at high rotation!
And the Throttle response is a proper feeling!
There is no peeky feeling, Bressin Bridger is also Stressless Smooth!
Veteran who wears partial control makes it so obedient that she gets groan!
The ease of Cancellation of the emblem is easy to do with the ratio of NORMAL, so it's wonderful!
Performance that Beginner's Loose and Veteran's Delicate also responds without complaint!
Although it seems to be the last appearance, Silencer's design is fierce fading, but since it is not a fashion style that is excessive, incorporating modern design, it will not make an old impression even if you use it for a long time!
If you want to Appeal Aftermarket parts with the first Motorcycle, those who want to enjoy a bit of Aftermarket parts by connecting as many as you want, Variation that also responds to either request is also good!
I made a NORMAL tick with White titanium!
MC41Second Type Model, never have many alternatives Aftermarket parts. MORIWAKI has done Lineup and thanks Large!
For those who are on the Second Type Model, it is a recommended one!
View detail
Satisfied with low and medium speed Power up
Round TypeStainless Steel was selected for its low price.
Installation using liquid Gasket has no problem at all.
When IdolUp immediately after engine startup is a bit annoying, is it acceptable range.
It was able to experience Torque up of 3000 to 6000 rpm on the Manufacturer's blog as the power curve, because Axel degree of opening decreased, fuel efficiency has increased by 2 to 3 k.
There is an effect of reducing the Axel opening degree in both the pleasant sound and the noisy when the Axel is opened.
I like it better than NORMAL, so I like it.
View detail
Fits: HONDA HORNET250, HONDA Integra750, HONDA Integra750, HONDA Integra700, HONDA NM4-01, HONDA NC750X DualClutchTransmission, HONDA NC750X, HONDA NC750S DualClutchTransmission, HONDA NC750S, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA CBR250R, HONDA CB250F, HONDA AX-1
Required and sufficient performance
I use it as Joint gasket when diverting Motocrosser's Exhaust System to 250 SB.
Since Exhaust System is impossible, Exchange Span is about half a year to about a year.
View detail
Fits: HONDA HORNET250, HONDA Integra750, HONDA Integra750, HONDA Integra700, HONDA NM4-01, HONDA NC750X DualClutchTransmission, HONDA NC750X, HONDA NC750S DualClutchTransmission, HONDA NC750S, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA CBR250R, HONDA CB250F, HONDA AX-1
[Webike Monitor] Since it is the two Set, it can use in the time of Muffler exchange, and the case of return, and is convenient. The price is also handy and inexpensive.
[Webike Monitor] Since it is the
two Set, it can use in the time of Muffler exchange, and the case of return, and is convenient.
The
price is also handy and inexpensive.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
[Webike Monitor] It is prepared according to vehicle type, and when choosing, it does not waver. Although brand-name parts are not bad, either, it is recommended at the point which is easy to choose. Since it is two Set again, when returnin
[Webike Monitor] It is prepared according to
vehicle type, and when choosing, it does not waver.
Although
brand-name parts are not bad, either, it is recommended at the point which is easy to choose.
Since it is two Set again, when returning, it is good not to purchase once again.
I think that
quality is good and we can recommend you.
When purchasing the
Replace muffler (Full exhaust), it is company by all means!!
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
[webike Monitor] They are necessaries at Muffler exchange. However, why are they two sheets although it is a single cylinder? In particular otherwise, it is satisfactory. It is recommended.
[webike Monitor] They are necessaries at
Muffler exchange.
However, why are they two sheets although it is a single cylinder? In particular otherwise, it is satisfactory.
It is recommended.
View detail