Reviews
I'm happy with the sound, but...
The welds are too loose and the lids come off quickly. View detail
I'm just kidding.
Heat-resistant stickers purchased separately are applied to the product to make it look like a fake 0000.
to
No one has ever found out.
The sound is a little louder, but the performance is almost as good as NORMAL.
There seems to be no change.
Installation is easy, but the Right Side will be empty, so a side cover must be prepared separately.
It is necessary to
View detail
They're cheap and they beep a little, but they beep!
The pipe inner diameter is thicker than that of the S1, so the sound is more Large-like, but I am satisfied with Large. View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
No exhaust leakage.
Used for Exhaust System replacement. The work was completed without any exhaust leaks. View detail
HM300 Baffles
Great price on a hard to find item for the early CB750 HM300 exhaust. Perfect fit & finish. They were an exact fit for my bike. The price was great too, and the service as well! View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z900, KAWASAKI Z750
To Second Type ModelExhaust System
The Kawasakiz1 z2 Second Type Model was replaced with the so-called 76Exhaust System Baffle.
The engine turns smoothly with a rough sound.
View detail
Baffle with care
I used it on a KawasakiZ1 with a PAMS assembly tube.
The method of using CB750's Normal muffler's Baffle for the assembly pipe was seen in old YOSHIMURA pipe. The conversion adapter is very accurate, so it can be installed on most of the tubes.
Sound does not get tired when running with the bass sound working. In addition, the appearance of Exhaust End can direct the sense of particularity because the person who installs this Baffle is not seen too much. It is a good Baffle.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
Gasket
There is no exhaust leak and it works normally. View detail
CHERRY Cherry Φ70Short Tube Hand BentType
It's well made for the price. ！！！！ View detail
For Rust hiding (lol)
I bought it because the Rust on the Flange bolt was becoming more and more noticeable.
Installation is simply a matter of replacing it with a pure STD nut.
Use a Torque wrench to tighten to the specified torque of 25 N/m.
It's no wonder it looks so good.
By the way, I applied Silicon Spray to the Bolt and this product when I removed the pure STD Nut.
View detail
Good!
Good!
It's inexpensive and I love it
I don't know how durable it is yet
I don't think the car is inspected
It's a recommendation for Kawasaki cars
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z900, KAWASAKI Z750
If you're going to put a Ripro 4-pointer on, you should replace it
It is more Reasonable than the PMC made one, probably due to the lack of Glass Wool
The S SizeBaffle Glass Wool that comes with the MRS Ripro 4-pointer is I had to remove it, so this product is enough for me
M SizeBaffleSingle body, it looks like the hole is too large When you see it on, it seems to be just the right size
The holes in the S SizeBaffle are too small
There are many disagreements about the sound compared to the collective tube, but first of all, the M SizeBaffle I think it's worth trying without Glass Wool
View detail
4.0
I use it for Short Exhaust, but I am not dissatisfied.
What's cool. Glass Wooletc. There is nothing to say if it is attached, but because the price is cheap ...
The sound is explosive.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
Dissatisfied
It is also a Universal product but there is no way but I thought that it was not suitable for cb 400 sf installation.
Just because it is a Universal Product, I will give up only if the shape is slightly larger than the product that prevents exhaust leakage.
It is not necessarily a product that can not be installed.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
I think that it can not be used for CB 400SF
CB400SB (NC39) Used in.
Exhaust leak if attaching while considering something like Small.
It was obviously small as compared with the one of KITACO ordered at a later date.
CB 400 SF for compatible models (NC31,NC39) Although there are, I think that it can not be used in these Motorcycle.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
As consumable parts, COSPA is nice
It is the second purchase.. Since it is an Exhaust System which must be removed every time Oil Filter is exchanged
It is used quite often..
I feel easier to take when things like circle round this round than those of flat type.
However, it seems that whatever you use, it is the old car that puts Torque that is not loose at first sight
I also worry that the Stud will break, so I will tighten it accordingly. After traveling 2 degrees 3 degrees is not tightened further if it is fitted or it is crushed it will become sweeter so tightening will become sweet so that Nut will fly away unless you are conscious of tightening until the third run I think that it will become.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
With ZEPHYR 400 χ
I do not quite understand good good because it is a consumable item
I used it properly and finished using it properly so it is so dirty so Large is durable (Lol)
Because I will exchange about 3000 not to go to distance
If someone who uses it for a long time is concerned, it may be better to use OEM or the like for mental health
People of Type who change frequently think that they will play their role well.
It's easy to buy this as it is with O-ring.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
It is the second purchase.
【What made you decide the purchase?】 Required item
Of course, the price.
【How was it actually used?】 Required item
I bought it before, but since it was no problem purchase for the second time
【Was it difficult to install? (Hard parts case)】 Any item
Since it is Ring-shaped, if it is not fixed with liquid Gasket, it can not fall and can not be installed.
Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 Any item [Is there anything I was disappointed about?] Required item
Nothing else.
【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
I want the shape to have a more flat surface. Then I feel like I will not lose to other Manufacturers.
[Others] Any item
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
good!
It installed in ZEPHYR 750.
Large Changing compared to hand Manufacturer.
As consumable parts, this price is appreciated!
I have to exhaust the exhaust so I need it enough!
Until now, I exchanged it in 2 times, but if this price is exchanged every time I wonder?
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
Although a Muffler is changed yesterday, it used as it is.There is also no exhaust leakage and it will use about twice now.Since it is a ring-like, I think that more than this is impossible, but I think that it will be the No.1 COSPAR if it considers
Although a Muffler is changed yesterday, it used as it is.There is also no
exhaust leakage and it will use about twice now.Since it is a ring-like, I think that more than this is impossible, but I think that it will be the No.1 COSPAR if it considers that it can use twice for 100 yen.However, using twice needs your help by self-responsibility.
View detail