Reviews
It works fine!
[How is it used?
I replaced the tank cap with a one-touch type tank cap so that I can refuel the SPIDI when refueling the NSR250etc.
Was the one you received as per Image?
Some other impressions are nowhere near as good, but the one I purchased was not bad in quality and was perfect in terms of accuracy.
Was the installation difficult?
I was able to install it with Bolt On with Bolt.
The diameter will be 115mm Tank cap.
How was your experience with it?
It is easy to attach and detach with the One-touch when refueling, but the refueling port has to be put down once, which has its advantages and disadvantages.
[Included Parts:were they on?
Packing and Material:Stainless Steel Screws are included.
[Was there anything that disappointed you?
None in particular. It seems to be a bit risky as it seems to be hit or miss.
I would like to make it common for all manufacturers. I would like to see this standardized.
View detail
Used on NSR250R Racer
It is very good and easy to key less. I think the price is lower than other companies' products.
However, fuel may leak if the vehicle body is tipped over.
Note that in Race, Cap changes may require filling the Tank with explosion-proof material.
View detail
It's easy not to need a key.
When I was looking for a key less tank cap, I found a cheaper one, but I was worried about the quality, so I bought this one. This is a great product. (2NX) I used it on my SRX and was able to install it with the included Hexagon Bolt and Rubber buffer. I was worried because I had seen some information on the net that the length of the bolt was not suitable for other models or that the rubber had to be modified, but the SRX was large and strong. The only thing is that if you don't store it in a garage, it might be stolen by gasoline thieves, so you might want to think about that carefully. Also, I don't know what will happen if it rains or something. View detail
Easy to refuel
I bought this product because of NSR-MC28, and I thought the key was troublesome when refueling.
I'm satisfied because I don't have to worry about refueling.
However, since the mouth becomes narrow, it is difficult to check the amount when refueling.
Of course, since there is no key, you need to make sure that you are not pranked.
Also, the Bolt that came with it was too short, so I prepared it separately.
View detail
Fits: HONDA CBR900RRFire blade
It's not so simple
As the color is the only choice of Black, the dress-up effect is small, but it is the meat of the weight reduction The texture is perfect, with no corners cut, such as
The feel of the controls is solid and the Touch is more rigid than the OEMLever
View detail
It is Style..
As I think that it will not be the case that this product will be needed in the real sense, as a style.
Making is solid and you can fine-tune it.
A little may become Guard around Handlebar even when falling down.
Lever When adjusting the distance, you need to loosen the Screw of Lever Guard, but since there is not much to adjust the Lever distance,.
View detail
Since the pure keyhole has broken To an external Tank cap, since an exchange Yamaha has many common parts.probably it is attached -- I will come out -- 3 hole Type for an R1-Z -- purchase -- it being attached and, although attached easily.If the
Since the pure keyhole has broken To an external Tank cap, since an exchange
Yamaha has many common parts.probably it is attached -- I will come out -- 3 hole Type for an R1-Z -- purchase
-- it being attached and, although attached easily.If the Rubber packing which should come is not attached and it does not redo later again ... I think that it is a comparatively beautiful Aluminum cap of the
price. The color of
photograph for which I feel that it is hard to open until it merely gets used for a while is a Titanium color.
View detail
It attached using the Relay kit of a clever light. attachment can be easily attached, if a wiring diagram is seen. When attaching to CBR1000RR Since it is general-purpose article although the Valve presser foot needed attached to be pr
It attached using the Relay kit of a clever light.
attachment can be easily attached, if a wiring diagram is seen.
When attaching to
CBR1000RR Since it is
general-purpose article although the Valve presser foot needed attached to be processed, I think whether it is unavoidable.
Yet It is very pleasure although not run at night.
View detail
Fits: KAWASAKI Z1000 (water-cooled)
Adjustment of a lever position can also be performed and this ZiiX Lever is a retractable type! The Touch was also good.
Adjustment of a lever position can also be performed and this ZiiX Lever is a retractable type! The Touch was also good. View detail
Since the ballast is a thin shape, if an attachment place is kept, installation is is easy. If you can maintain at minimum, it can be attached satisfactorily!! Although it is five stars in my feeling ... Since durability is not known, it is four stars.
Since the ballast is a thin shape, if an attachment place is kept, installation is is easy. If you can maintain at minimum, it can be attached satisfactorily!! Although it is five stars in my feeling ... Since durability is not known, it is four stars. View detail
It was high, the hand took out domestic HID, and it was hot, but when there were worries and they worried about price-busters HID in respect of quality, it discovered the goods here in a Net. Since it said that the price was also handy, in play
It was high, the hand took out domestic HID, and it was hot, but when there were worries and they worried about price-busters HID in respect of quality, it discovered the goods here in a Net.
Since it said that the
price was also handy, in play was instantly looked for in a Net.
Since there was also likely to be almost no result fault, it opts for purchase.
4300k is chosen by
conspicuousness priority.
At this price, I thought that domestic lay about there was also good because the Ballast was small and thin.
Although poor
initial point light was dreadful, lighting is checked safely.
A flicker etc. are nothing.
However, since it is called a general-purpose article, and it had to be processed a little, I will be referred to as *4.
View detail
XJR1300 of the acquaintance was attached and used. Structure is good considering a price, and it has stabilized and switched on the light. It was not too so blue as it considered although an 8000-K thing was attached, said exactly, and felt it lik
XJR1300 of the acquaintance was attached and used.
Structure is good considering a price, and it has stabilized and switched on the light.
It was not too so blue as it considered although an 8000-K thing was attached, said exactly, and felt it like.
a high HID kit -- just for a moment -- in the direction to feel, it is a recommend.
View detail