Reviews
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Wound-resistant DURACON
I used to use a Hook bolt also made by J-TRIP, but after repeated use, the bolt was too heavy.
The scratches on the surface of the wheel have made it look dirty, so we decided to replace it with DURACON, which has been used on Ninja 250R and has a good track record.
It is DURACON, so any scratches are not noticeable.
View detail
Fits: KTM RC8, KTM RC8R, KTM DUKE, KTM Adventure
Good vibes
It was the right product for my needs. View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I went with Gold...
I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive.
View detail
Fits: KAWASAKI BALIUSI, KAWASAKI ZEPHYR400 χ, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI XANTHUS, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZRX400
For future maintenance
Purchased in anticipation of future maintenance using the Maintenance Stand.
Installation is as simple as tightening the bolt.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Used for ZX-4R
I was worried about whether I could attach it to the 4R because I couldn't find any information about it, but I was able to attach it without any problem. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
good
Since it is the same Manufacturer as STAND.
Because it is not as flashy as other Manufacturers.
View detail
j-trip Swing arm hookBolt
High quality and easy to use.
Note that Long is for z900 only.
View detail
Buy just in case
I bought it to use when the balance is bad and vibration occurs because it is a Tire hand gummy, but I don't care about the vibration with Mini circuit because the speed is low, so I don't use it for now. View detail
Fits: YAMAHA , TRIUMPH DAYTONA675, DUCATI Panigale 899., DUCATI MONSTER S2821, APRILIA RSV1000 Series, APRILIA RS250, APRILIA RS125, APRILIA SL750
Works well with J-TRIP's STAND
[How is it used?
Used in conjunction with the company's Rear stand in Circuit
Was the one you received as per Image?
Yes
Was the installation difficult?
It is very easy to attach to the OEM Swing Arm by simply attaching it to the original Screw Mount with the included Bolt.
How was your experience with it?
There is no problem at all for the purpose of use. I installed White because I thought Black would stand out because the Swing Arm is Silver. I think it goes well with J-TRIP's Rear Stand.
[Included Parts:were they on?
Bolt and Washer required for installation
[Was there anything that disappointed you?
Nothing in particular, but a little cheaper would be better.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
There are no particular installation points, but be careful not to overtighten the bolt because the side to which it is attached is aluminum and the bolt is steel.
View detail
In conjunction with Tire replacement
[How is it used?
I bought it to get WheelBalance along with Tire replacement.
I was not particularly particular about the Manufacturer, but I chose JTrip because it is a product of JTrip, a long-established STAND company.
Was the one you received as per Image?
I chose 1 Piece because I don't use it often.
As shown in the photo, the Weight is alternating between 5g and 10g.
How was your experience with it?
I have been using it without any problems.
I cut it to the desired Large size, temporarily fixed it with curing tape, and rechecked it repeatedly.
One piece is sufficient for the front and rear wheels of one vehicle.
[Points to note]
To prevent peeling, it is safe to thoroughly clean and degrease the Wheel before applying it.
【Review】
This is the first time I have purchased this product and so far I have had no problems with it.
It is good to be prepared in conjunction with Tire replacement.
View detail
J-TripOEM Product
It hangs well, and the compatibility with J Trip's STAND is as OEM as you would expect. The extension collar reduces the risk of scratching the swing arm. It may not be good for those who wear it all the time because it looks longer, but we chose this one because we remove it every time we use it. The color will fall off if you are not careful when removing it, which is a slight minus point. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
no problem
I used it on my Z900RS.
I had previously used an anodized swing arm hook on another motorcycle, but it originally interfered with the Jack, so it was scraped off and the substrate showed.
The swing arm hooks here are made of a plastic-like material, so the color did not peel off even after hanging jacks.
I was also satisfied that it was long enough to not interfere with the Swing Arm.
View detail
Balance
I went with Magic because it is not available in Silver color, so I decided to go with Black. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Used for Z650RS
It is for Z900RS, but it was attached to Z650RS normally. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Anodized or DURACON?
I bought DURACON because using Anodized Hooks inevitably results in Anodized peeling and scratching after use.
I purchased the black color and the scratches from use are not noticeable, but the black color is turning white due to sunburn.
In this respect, the White color may not be noticeable.
It is simple, so it does not have the same dress-up effect as the Anodized version, but I like the simplicity of the smallest necessary limit.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI NINJA400, BMW S1000R, BMW S1000RR, DUCATI 749, DUCATI Late 999, HONDA , KAWASAKI ninja, KAWASAKI Ninja 1000SX, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), SUZUKI , TRIUMPH DAYTONA675
For Transporter loading
The GSX150BANDIT has a Center Stand, so maintenance is easy, but when loading the Transporter, it is better to use the Racing Stand and Wheel Clamp to hold the motorcycle in place so that the Tie Down does not have to be closed so tightly. However, when loading the Transporter, it is better to use the Racing Stand and WheelClamp together to hold the motorcycle in place, so there is less wobbling. View detail
Fits: KAWASAKI Z1000, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI NINJA400, BMW S1000R, BMW S1000RR, DUCATI 749, DUCATI Late 999, HONDA , KAWASAKI ninja, KAWASAKI Ninja 1000SX, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), SUZUKI , TRIUMPH DAYTONA675
DURACON in White on a dare
DURACON to soften the impact of shaving in the event of a fall, and WHITE for visibility when STAND is applied.
As a byproduct, the anodized material of the Gold genus peels off when STAND is applied, and becomes scraggly, but for some reason, this one does not get scratched.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Ninja400, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-12, KAWASAKI ZX-10R, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja650, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI Z250
Perfect even if not on the conforming List.
The conformity is
BALIUS2、ZrX1200S、NINJA 250 ABS、ZX-6R、ZX-6RR
Ninja250SL is not mentioned.
Just tear the packet and Bolt On and it is perfect.
Now you can do a V-shaped Lift!
A must for self-maintenance of the undercarriage!
So, I have been using it for a long time, and as expected, Anodized is fading.
But, well, Wound is also something that comes in when it is received by Hook and can be applied by Mame in the future.
Large thing is that it will hold Firmly, so
No problems at all!
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI Z800, KAWASAKI Z1000
2018 Ninja 650s should take note!
The JT-107D is applicable to the 2018 Ninja 650.
Note that Webike's List is wrong!
The Manufacturer QR code was also unreliable because the information was out of date.
Thank you to those who alerted us with their impresarios.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
It combines practicality and good looks.
It is practical yet stylish on the feet. View detail