Reviews
Fits: YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R
"Extremely pleased with my shipment!
Package arived Very quickley all parts inside, Pakaging is great and everything intact Thumbs Up ps not my first order. View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner
Favorite ^ ^ ^
It was very good
It was installed in less than 30 minutes with no modifications.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner
Y's Gear^ ^ for peace of mind
Other people say they had to modify it, but it was easy to install with no modification at all. Adhesive is included in the package and it took about 20 minutes.
It looks better. w
View detail
There doesn't seem to be any Logo.
When I ordered and received the without Logo and asked for an exchange, I was told that I may receive the without Logo even if I exchange it for a Spec. change.
If you want to buy one with Logo, please be careful.
View detail
Fits: YAMAHA bolt, YAMAHA bolt, YAMAHA bolt, YAMAHA SCR950, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA Bolt CSpecifications, YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A
Fits BOLT Shoulder Bag-2013
Arrived earlier than expected. There were no problems with the product.
I didn't like Silver (Rust generated) and wanted it to be Black anyway.
Although not cosmetically superior, the imported product was selected because it was cheaper.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner
Not something I'd take the time to order.
Perhaps it is because they are foreign parts, but they are cheaply made. Also, the overall length is long, which may be due to the size standard of foreigner's hands, but the thickness is thin and the rubber is hard. The length of the grip is different from that of the NORMAL grip, which is why it is a smaller, stiffer rubber grip.:Pair (for Left and Right) The switch box positioning holes in the handlebar need to be re-drilled.
I found the Normal grip to be superior.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner
They are very expensive because they are custom parts for export!
The grip is long, as it is only for export parts and seems to be made for foreigners. How big are foreigners' hands?
The switch box on the handlebar could not be installed in the NORMAL position, so a new hole was drilled in the handlebar to prevent it from turning around.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZ6 2009, YAMAHA FZ6 2009
Fork seal kit Yamaha
My friend asked if I could also get them this kit whilst I was getting other parts. I was happy to do this. They got the correct part numbers directly from the Yamaha webike site for parts. The cost was pretty good but as I was not paying for them, they were happy. Included with this order was some of my own parts. I used EMS for shipping as I know they are reallyquick at delivering in a short space of time. This time was no different, delivered within a week of ordering the whole lot of parts. Even though, some of the parts were not in stock. Fantastic. Upon arrival, all the parts were perfect and intact. No signs of damage on anything, including the samller parts that are a little delicate. The fork seal kit was great, everything you need for the entire job. My friend is very happy and happy that they got a great deal. Thank you Webike, from myself and my friend View detail
Is good
I replaced the standard Seat to improve the Position. The footing is a little worse, but not as bad as I thought it would be because the Seat angle is Narrow.
LowdownSpec. will feel quite leggy if you replace it.
The seat was low in relation to the position of the handlebar and footpeg, which was not good for an off-road vehicle, but after the replacement, it has been improved to make it easier to drive aggressively.
As for appearance, the outer skin is cheaper than the standard Seat.
Regarding installation, the Rear latch does not seem to engage properly and must be pushed in to install.
View detail
Fits: YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F
FMF definitely stands for they’re
Love the pipe thank you guys for being the only ones to have anything in stock saved me was able to make it to the races! I purchased this header about one week ago and so far I am very impressed with the results I have seen. I have a yz250f and it produces very good bottom end power. If you are looking for a new header this fmf megabomb is the way to go. The only thing I had to purchase in addition to the header was the fmf exhaust spring kit which was not included with the header. View detail
Can be installed in 2022 MODEL
I was a little nervous because the shape of the hook is different from that of the normal seat, but it can be installed on the 2022 model without any problem. And I think it will be a disadvantage in terms of footing (legs don't go down straight) because the legs open a little from the base of the seat. The rider was sitting on both heels, but with the RALLY50Seat, the heels of both feet were 1 cm higher than the other. Since the seating position has been rounded off, the effect is not large, even though the seat height has been increased from 875mm to 910mm. I have only played on it for 2 hours, but I didn't feel that my buttocks would get sore. The appearance of the surface skin may be a matter of taste, but I would give the Normal seat a "slight edge". View detail
Improvement of riding posture
Low seat group.
LINK is initially set back to NORMAL due to STAND-related concerns.
Despite my short stature (164cm), I was getting used to and comfortable with the shoes, and I was becoming less anxious about my footing.
Then I began to wonder about my boarding position. Today, I was beginning to think that I would like to board a little closer to the front of the train.
I can move the handlebar closer by replacing it or taking Offset, but for me, I want to bring the ride position to the front.
It would have been nice if we could have tried the normal seat, but we didn't expect to be given such a package when we took delivery of the car, and we left it at the store because we didn't think we would use it anyway.
I had read in a review that the RALLY50Seat was more comfortable than the Normal seat because of its shape, so I decided to buy the RALLY50Seat if I was going to buy it anyway. I bought the RALLY50Seat because it was much cheaper than other retailers. （I bought the RALLY50Seat because it was much cheaper than other retailers (but still expensive for a trial purchase).
It's a long story, but here is the main subject of my impressions. In case you are wondering, TENERE700 is a 2020 MODEL.
(installation etc.)
Slightly longer? Feels like it locks while pushing in quite a bit toward the front. Feels a little deflected?
The integrated design makes it easier to access tools. In addition, the tool space is a little larger.
(Looks)
The seat surface is visibly higher. When I look at other RALLY50Seat descriptions, I see 30mm, 20mm, and various others? And again, this product is 41mm?
I was concerned about the angle of the neck of the low seat, but this has been improved. It looks good.
I think the thickness near the Tail is a bit unattractive. I think it has something to do with deflection.
I'm not sure I like the texture of Seat. Will this place look good when it fades away?
(When riding)
Very good. The feeling I was looking for.
However, it is not so hot or steamy in the low seat.
(When stopped)
I thought lightly that it would be enough to shift the buttocks so that I could tread lightly on the LimitFootBrake with a flat Asphalt.
I was not able to pay for the STAND, but it was impossible to stand it up. Well, this is not a problem if you get off and do it.
I am a snake charmer, but I will do my best with Low seat.
View detail
Fits: YAMAHA TRACER 900 GT, YAMAHA TRACER 900
Matching Design is only possible with OEMOption
[How is it used?
Everything from everyday use
Was the one you received as per Image?
The surface is Material:Carbon Style but with Vinyl-like texture
Was the installation difficult?
Careful positioning
How was your experience with it?
Almost never hit when riding normally, so it acts as an anti-scratch device.
[Included Parts:were they on?
Included Parts:None
[Was there anything that disappointed you?
None
▼ Besides.
The purpose of this product is to prevent scratches on a moment's notice. The purpose can be sufficiently achieved.
View detail
Single seat cowl
Single seat cowl installation on OEMCowl.
It is easy to make, just remove the OEM Tandem seat with a key and put it on there with Bolt×2.
Bolt is somewhat difficult to insert, but the process itself was easy and quick.
There is a slight difference in color from OEM, but we are generally satisfied.
Structural changes are required.
View detail
Fits: YAMAHA SR400, YAMAHA SR400
Reliable Parts.
I used it in my TW days and found the Large change useful, so I'm using it for SR as well.
The Plate will protect the Crankcase from small stones, etc.
It is OEM, but made in Wellington, famous for SRCustom.
good point
Plate itself is highly textured, so it can be used as a dress-up.
It protects Engine from Small stone.
Aluminum, lightweight, and durable.
Easy to install.
A bad point
The price is relatively high.
It is not expensive if you consider it as a part that can both protect and dress-up.
Even if Plate gets beat up after continued use, it seems to me that it would still be tasteful.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250FX, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F
Made with care by GYTR
It was a great help to me because there are not many places that sell them. I've been using it for a few years now, and I'm very happy with it. 。 There are similar products made by other manufacturers, but I chose this one because it is an OEM product made in North America, and I wish the price was lower. View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300A
Comfortable
Easy to install and works great.
The seat is on the low side and the Screen is on the high side, I am 172cm tall and the wind does not hit me.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA bolt, YAMAHA bolt, YAMAHA bolt, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900CU Raider, YAMAHA ROYALSTAR1300
Grip replacement
My own MYDRUG STAR CLASSIC11 is getting more and more dress-up.
I'm in love with you again!
View detail
Merit is there, but we have to assume that Demerit is the Large threshold.
When I purchased the TENERE700, it also came with a Lowdown Link and a low seat for free.
After driving about 150km with standard Seat, I changed to this Seat which is said to be lowered by 20mm, and I drove about 1000km without Lowdown Link.
Sure, the footing will be a little better. This is clearly a Merit.
However, compared to the standard Seat, the Cushion is naturally thinner, and the sitting comfort is definitely worse. However, in this condition, I was able to run 340km in Tokyo→Niigata without any pain in my butt, so it is not so bad.
(For me) The biggest problem was the change in riding posture rather than the worsening of seating comfort. Since the chair is only 2cm lower, the footpeg is closer, the knees are tighter, and the handlebar is relatively higher.
Now I'm back to the standard Seat. It's still this way. (standard) It's better!
View detail
![Single seat cowl[R6 SEAT COWL]](https://img.webike-cdn.net/catalogue/images/41360/yamahar6_01_TS.jpg)
Fits: YAMAHA YZF-R6
Delivery date undecided
I ordered it in September, and it was cancelled with undecided delivery date, and today I saw that it can be ordered. I bought it at an overseas auction. I wish I had been contacted. I don't know if there is a service to that extent. View detail