Reviews
Fits: HONDA DAX125, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110PRO
Mounted on CROSS CUBJA60
Installed for dress-up and ease of gripping.
My hands are on the Large size, but OEM is a bit far away and my hands get tired after riding long distances, so I bought this. I am glad I replaced it.
View detail
Fits: HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 110, HONDA Super Cub 110, HONDA cross-cub
I recommend it!
Installed on CROSS CUBJA10
on purpose of installation
As the instruction manual says.
Some vehicles have to be shaved Crankcase
Quantity on the mating face of the Case:Pair (for Left and Right) Vehicles with upper and lower gaps in the
The hole where the Cylinder enters needs to be cut into a circle.
When assembled with the gapped cylinder, when the engine is applied and the cylinder expands thermally, it will cause the gapped cylinder to expand and the engine will not be able to operate.
It will not spread and will result in biting a new Piston!
The Gap of the Case cannot be checked unless the Normal cylinder is removed.
Then there is the work of processing the Case, so
It is safer to ask a motorcycle shop to assemble it.
I worked on two vehicles, mine and a friend's.
Both units had a top and bottom Gap in the Case mating area.
After cutting to a circle with Air Leutor, it was installed.
It is only 15cc bore up.
The effect is extremely Large, making Torque thicker and easier to use on a daily basis.
It is now easier to go uphill.
The parts we use also have HONDAMark on them.
Is it made in ThailandHONDA? I think it is reliable.
Regular Specification, and I think the difference is Recommendation
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
ninja400 2018 Rear Carrier
[How is it used?
Install SeatBack
Was the one you received as per Image?
Street Image
How was your experience with it?
Is good
[Points to note]
It might be better to have someone from Support to do the installation.
How did it compare to other products?
I don't know, I haven't compared.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
It was a good purchase
Installation is not difficult if you have the proper tools and basic maintenance skills. The product itself is well welded, painted, and assembled with good precision.
I am glad I put it on because it changed the impression of the look and gave a sense of volume.
View detail
Bag and Quantity:Set and practicality at its best
The bracket on the underside could have been made a little more parenthesis. I attached the CenterCarrier bag for SUPER CUBCROSS CUB of the same manufacturer, and it went on without any problem. View detail
hmm
I'd bought the CB250R before because I'd heard it had a bad footprint.
I'm going to put it on.
Quality is good, almost OEM Product quality.
Almost indistinguishable from an OEM sheet.
The seat feels a little thinner, and the corners of the seat have been removed.
However, I don't think we should expect a Large width footprint improvement with this seat.
It's just a little bit. It's just a little bit. I feel like I have better footing.
View detail
Easy to install
Installation is really easy, taking less than 10 minutes. The texture is good, and the Pipe on the thick body is a nice parenthesis. If I have one complaint, it is that it is not designed to be installed with a helmet holder, even though it is an Endurance Carrier. Other than that, I am satisfied. View detail
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
Easy!
It can be used for both navi110 and PCX150. It is cheap and not bad. I guess it's not so bad, but it's not that bad. View detail
High quality is realized, seems to be very practical.
[How is it used?
Myself, I don't like Guard, but to use it as a base for fog mounting.
Was the one you received as per Image?
Impressed with the cleanliness and precision of the finish. I think it is a good product for the price.
Was the installation difficult?
The 3 Bolts that suspend the Engine are replaced with the attached special Bolt, so basically, a Jack is required. I think it is easier to work with a smaller Jack.
How was your experience with it?
When I installed it and got on the car, I was impressed by the very high quality of the assembly, which was nicely aligned with the lines of the Radiator cover, as shown in the photo. I was very impressed with the high quality of the assembly.
I have never tried to rub it, but it seems to do the job of PROTECTION well.
[Included Parts:were they on?
The instruction manual is, well, easy to understand.
[Was there anything that disappointed you?
None in particular
Manufacturer conformity is after 2020, and Initial Model does not seem to conform.
The pipe diameter is 25.4mm, so the LED fog bracket fits a wide range of brackets.
LED fogs are in the works, but I will add them when they are installed.
I thought about installing the fogs on the handlebar, but since the R's sibling has a heavier headlight assy than the R, I did not want to add any more weight to the handlebar.
View detail
Fits: HONDA CBR250R, HONDA HRC GROM, HONDA HRC GROM, HONDA CBR250R, HONDA HRC CBR250RR, HONDA HRC CBR250RR, HONDA GROM
Drain bolt
Fast shipping, nice packaging, will repeat ordering parts again, About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
We should have done this from the beginning.
I used to use a lever with a parking brake, which is a type of brake that you push into the brake lever.
Screws loose and slipping on hills etc....
I had to re-tighten it each time.
And if you tighten it too much, the Stop-lamp stays on.
Lever fades and rattles, and I'm sick and tired of the inferiority of Chinese products.
I reverted to OEM Brake lever.
I found this product on YouTube, purchased it and installed it.
Installation itself is very easy.
The effect is also Outclassing
Why didn't I buy it sooner?
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-S125, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX eHEV, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM
Good!
[How is it used?
Purchased because there was no bar to install the Smartphone Holder.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Just tighten with a Hexagonal Wrench. It was easy.
How was your experience with it?
I have had no problems at all and it has been good to use.
[Included Parts:were they on?
Included Parts:itself was not originally there. No problem.
[Was there anything that disappointed you?
None
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-R125
I am satisfied with the quick delivery and excellent quality!!
I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. -------------------------------------------------- -------- I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. Powered by Google Translator View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
The construction is good.
Material:Stainless Steel and well made.
However, I think that about 4,000 yen is appropriate at the highest.
Instruction Manual is also paperless and not included.
View detail
Great Looking Engine Guard
Out of all the available engine guard in the market, this Endurance Engine Guard blends in the best with the bike itself. Standing afar, you would not be able to differentiate the guard from the black original frame. The tapering of the guard creates a very nice flattering silhouette. Love it very much. View detail
Gusseted and safe to use.
It has a GIVI Box weighing about 3 kg and is used to load shopping.
Gross weight of 8 kg giri (Sensation) There is no particular problem, although there are occasional instances where it becomes
The material is solid when pressed down, the material is reasonably thick, and the welds are beautifully well welded, so it is safe to use.
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub 110, HONDA Super Cub 110, HONDA Super Cub 110
CenterCarrier for CROSS CUB
Various CenterCarriers for CROSS CUB are available, but I bought this one because I thought it was the most practical.
Mount bar is also available for mounting whatever you like.
Small objects such as rain jackets can be placed and secured with a small fixing net such as for MotorcycleNet.
Helmet holder can also be attached.
DAYTONA in the photo. [Helmet Holder Replacement Parts] Holder Body
Belt and other bags can also be attached.
The photo shows a magazine supplement.
View detail
ENDURANCE [Exclusive for Race]Under Cowl Set
Molding quality and texture is fairly good its to be expected from fiberglass resin made. I like the fact it comes with all the mounting hardware which makes installation easy. The blue markings i made on the product are areas i need to grind or cut off due to my exhaust set up which i am very aware of before purchasing it, i knew i would be modifying it to make it fit. Product was well packaged and protected. I would advice anyone who purchase this cowl to be aware of what type of exhaust set up you have and be prepared for minor modification but if your a Do It Yourself like myself, it shouldn't be difficult to work around modifying it. On a side note you will need to paint it with the color of your choice as well. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail