Reviews
It was easy to install
Installation was easy.
It also looks better.
I wish the price was lower.
View detail
Silencer band
We purchased Silencer's Band exclusively for the Manufacturer. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI , KAWASAKI Z650RS, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
PinpointAttachment
It's a Lever Guard on the Brake Side. It's a good design and perfect for Accent.
I'm sure you'll be useful in Circuit driving, but the reality is that I'm not that dead heat.
The Clutch Side Bar End is also included in the package.:Pair (for Left and Right) It is good that Balance is taken without any difference in the
However, the Bar End does not have the same weight as the OEM and I was a little worried about vibration.
I was surprised that I did not feel any discomfort from the Large Chick when I took a short trip on the highway to the Yamasaka Road.
6R doesn't seem to have much vibration.
Sometimes people say they ride with their arms or their hands hurt, in which case they might be numb.
As a precaution, the positioning of the two ScrewGuard lengths should be decided in one shot. If you temporarily fix them a little stronger
Black paint has peeled off and left Screw marks. Most of the time, it should be the shortest and Large sturdy. (Tears)
Lastly, come to think of it, I didn't have TRICKSTAR's Sticker attached. I don't care because I don't put it on. Crying
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Satisfied
Purchased in October. The mesh is fine and seems to protect the Radiator from small flying objects (stones, etc.). On the other hand, I feel that the water temperature rises faster. This is a good thing in cold weather because the ideal water temperature can be reached quickly, but what will happen in the summer? I hope it does not exceed the capacity of the forced cooling fan. View detail
cb400sb installation
However, the mounting hardware screws were too small, and since Cowletc. was worked on as it was, I had a hard time installing the screws.
In the end, we compromised and fixed the top with Tie Wrap.
I have toured about 200 km after installation and have had no problems so far without any unusual noises.
I went with Black Plating so it's not as noticeable, but so far I'm happy with it.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Design is good, but texture is not so good
Air IntakeDuct and Quantity:This is a product that is intended for Set use.
Inevitably, this will be used.
The thickness is very thin, the same as the Punching board at Home center.
The Manufacturer logo is also a bit cluttered when viewed from behind, and I think the cost performance is a bit poor.
Also, the double-sided tape is used for the mounting method, but I wish they had devised a better method for that as well.
Air IntakeDuct is responsible for the performance.
View detail
SE + 22nm
I installed it on a 19 MODEL H2SXSE+.
The actual measurement was 22mmDown.
Originally, SE+ seems to be about 10mm higher than SE, so it may not be the 30mm Down that Trickster says.
Even with approximately 20mm down, the effect was positive, and some of the footing anxiety was eliminated.
However, side stand parking is a little bit standing up, so care may be needed when parking on an incline.
View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000SX
Gentle sound, excellent design
Anyway, it looks cool.
As for the volume, since the Ninja1000SX itself is a lunch box, it doesn't get too loud (even with the Silencer removed and straight pipes, it doesn't get too loud), and you may feel it's not loud enough. I think it is more suitable for the use as a tourer.
I feel like the roar when I turn it is stronger, so I have to be careful not to turn it too much lol.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Normal.
Trickster's Air ductGuard is not much different from NORMAL when installed.
It is not noticeable because it is in the Duct section. But I am self-satisfied.
View detail
SC project gp70r installation ok
Installed in Exhaust System of Title notation.
Because the original exhaust system is without Baffle setting, it is necessary to open the hole for fixing Baffle. The sound deadening effect was high, and only Baffle without Glass Wool was able to deaden enough. The end Baffle for the φ70 with an angle is not easy to find, and the angle of the gp70r is almost perfect.
View detail
I feel like this is too much to pull off...
[How is it used?
I used Nojima's Full Exhaust System + Harada Silencer on my XJR1300C.
I chose this product because the volume of Harashow is too large and I want to reduce the volume a little.
Was the one you received as per Image?
No, it wasn't. I thought it was the StraightPunching of the 38φ, but there was a lid on the exhaust path on the way.
Once it hits the lid, it is discarded to the side and exhausted back into the punching again at the back side of the lid.
It's a simple bulkhead structure. This is too bad.
Was the installation difficult?
As I said, it was too loose, so I cut the end off a bit and drilled four M10 holes in the lid.
How was your experience with it?
Well, processing was necessary in my case, but it is good because it became the volume sound quality as I wanted if I processed it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it's a bulkhead structure, it should be properly described.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
Lend me your ears a while
Repair Parts are not detailed, so they are expensive when it comes to repairs. View detail
Fits: KAWASAKI Ninja250SL, KAWASAKI Z250SL, KAWASAKI Ninja250SL, KAWASAKI Z250SL
Wrong insertion diameter.
I bought the IKAZUCHIBlack edition of Universal Product when I purchased it.
It is listed as having a 60.5 insertion diameter, but it is actually about a 50 insertion diameter.
Therefore, IKAZUCHI Silencer was not attached to it…
View detail
As Bar end slider
Due to the limited shape of the Bolt On, it can only be mounted on the Axle Shaft included in the product in question, and it is heavier than the OEM Product & less accurate.
Since I can't return it, I diverted the Slider as Bar End, but
The included Axle Shaft was unavoidably discarded.
View detail
Fits: HONDA , KAWASAKI
The machining accuracy is beautiful.
It is easy to install as it only needs to be replaced with the NORMAL Filler cap. The cut process of the outer circumference is very clean and precise.:I would have been happy if it was a set. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI , KAWASAKI Z650RS, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Does that help?
The Lever Guard was intended to be installed from the start when I bought the ninja
Lever Guard is available from various manufacturers, but the I decided on this one in black
Installation is easy
Just remove the Bar End from the original and put it on
But you may not be able to tell from the picture "Dents It was attached from the beginning It's a scratchy thing even before I put it on
In addition, he says the attached Bolt head Large size is different "Chinese Manufacturer? The state of packaging that makes you think that you're a good person
This time I bought the Bolt at Homsen and got a Large Kisa
Do you think it's a Lever Guard"degree"product or something?
So, next time you buy a product from Trickster and "Dents Ya Wrong size If you have trouble with such Trouble then …
View detail
Fits: KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE
5mm Up It doesn't change that much as expected
Height 167cm Short Reach
I bought it because I thought it would be easier if the Handlebar went up a bit
As expected, I don't see that much of a change in the 5mm Up
The Logo of TRIK STAR will be covered by the Handlebar and will not be visible
The green color is glimpsed and self-contained
Installation was easy and easy to pimp
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
It's too muffled
I installed it on an '18 CB1300SB but it was too quiet than the OEM and received a Shock
Level that looks great but has no sound and I want to return it
There is absolutely no proximity noise value of 93db
It is not easy to fit the bolts when fixing Silencer band and Bracket It was hard work
View detail
I have no complaints about this
It's not a bad look and feel However, since I just unloaded my new car, the gold is scarce due to the inclusion of many things, and I'm not sure if I'll be able to afford the costumer I just turned it down low I like it and will continue to use it View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS
It changes color
Looks and textures are pretty good
However, the Black Painting of the Pulsar Cover may be caused by the Engine heat The color changes and becomes brownish
I bought it because it's Black and it doesn't make sense if it's discolored
You should buy it with the idea in mind that it will change color
View detail