Reviews
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
For Smartphone Holder
I installed it for the Smartphone Holder, and it is easy to install after removing the Handlebar on the left side, although it is coated with screw lock material, so you need a good tool. The product is very well made and the paint job is fine, I recommend it for USB power supply installation and Smartphone Holder installation. View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
It's working for now.
It is used with Base of Smartphone Holder.
It's been a short time since I installed it, so I don't know about rust or other problems with the Others.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Recommended for those who want to refreshing the Handlebar area.
I bought this to refreshing the Handlebar area including the Smartphone Holder.
Not too long, not too short, just the right length. The thickness is also no problem.
Installation is not difficult as all you have to do is remove the Bolt and replace it.
Screw The locking agent is firmly attached, but I think it can be removed normally if you have a tool.
The Handlebar can be extended in a natural way while keeping the impression of the Separate handle, so it is recommended for those who like the refreshing Handlebar area.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
It's enough to install Smartphone Holder!
I bought this because I only wanted to install the Smartphone Holder.
NINJA1000sx, originally there are various equipment as standard, because the retrofit is a Smartphone Holder, this Size is enough, but I think that it was even better if there is a lid of Capetc. on the tip if possible.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Just like that!
The installation was very easy, and although some reviews say that the original Handlebar bolt was too hard, it came off without difficulty and the installation was completed in about 2 minutes.
I installed the Quad Lock Smartphone Holder and I am satisfied that it works as Image without any problems at all.
However, the point of concern is that it is hollow, so if water accumulates on the inside, is it Large strong?
Nevertheless, it's easy and a good product that serves its purpose.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Cost-effective
My car is Kawasaki Ninja1000sx, 2020 model. Because the car has a separate handle, there is no place to install a mobile phone holder directly. My friend said that this bracket rod of Tech mount is good, just remove the original factory screws and install it. So buy decisively. Look forward to the effect after installation. ---------------------------------------------- My motorcycle is Ninja1000sx from Kawasaki, and the year is 2020. The original handle of this car is separated, so there is no place to install the phone holder directly. My friend said that this mobile phone holder is very practical. So I bought it on webike. After receiving it, I only need to remove the original factory screws to install it. Its effect is very easy to use. It's worth waiting for it for so long. Powered by Google Translator View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
great! It became comfortable.
The z1000sx doesn't have a proper place for a phone stand or action cam, but I solved it with this. Fast delivery, reasonable price, and above all, it feels genuine, so it's really good because there's no difference at all! I really recommend this to those who ride the z1000sx! z1000sx does not have a phone stand or an action cam ladder, and I've solved it. Delivery is fast and price is reasonable, and it seems like genuine because it does not have any sense of difference at all. z1000sx These guys are really amazing! translated by Google Translator View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Required Items
I installed this on a 2019 Ninja 1000
I'm just using the Daytona Smartphone Holderwide for my operation It is not too short or too long and does not interfere with the suspension adjustment
Also, the vibration did not cause the Holder to shake while driving
When removing the original M10Bolt, I used an 8mm Wrench from an automotive tool
As per the other Review, it was pretty solid, but when I got on the footpeg and put all my weight on it I managed to get it around It would be easier if I had the proper tools
In addition, since screw lock agent was not applied at the time of assembly, you need to periodically retighten it for safety I would like to
View detail
HDXL 1200 C SPORTSTER 1200 For PowerVision fixation
I bought it for Mount of PowerVision.
It is recommended with mounting holes with PowerVision Body and Exactly.
I am satisfied with how things are made, but the price is somewhat expensive.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Ninja 1000 has a standard Custom
Because Ninja 1000 is a Separate handle, there is no place to fix Accessories around Handlebar.
Mount Bracket eliminates this problem by tightening Bracket to Handlebar by Bolt. Currently we are installing SYGN HOUSE 's Power cable only, but there are plenty of space to install other things.
Price is also cheap and easy to install, so it is a good product.
View detail
Excellent in Clamp
I searched Clamp for GARMIN's Navigation 550 relocation, but this was the only thing that was decent. Because the price was high, it was the last option of choice but purchased. I adjust it while tightening a solid body with HexaBolt, but there are those of Size that I do not have Wrench in it, and I have to carry the attached Wrench for adjustment etc. during driving. Impression of trying to install is "Athletic. Is it. The handle is a bit longer but I do not mind too much vibration while driving. I thought that it would be better if the price is cheap with this texture so so. View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Satisfied
Purchased to be attached to the 2017 Ninja 1000.
I attached it without problems.
Currently I use it to fix Navigation and Helmet lock on LeftHandlebar.
I am considering attaching it to Right Handlebar for fixing Gopro.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
For use with smartphone Navigation
I purchased it for smartphone Navigation and USB installation.
Looking at Review OEM installation Bolt seems to be pretty hard due to Screw lock so we heated the Bolt in advance with Heat gun to disable Screw lock and then removed it using a longer Handlebar.
If there is a proper tool, it may be off without warming Bolt, but just to make sure Heat Gun etc. Heat Bolt and then turn it.
It's just Parts that just extends about 5 cm, but it's really useful.
Just installed USB port and Smartphone Holder.
I think that the price is reasonable and reasonable.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
ninja1000 Mount Bracket
The price is cheaper than the one of the certain Shop, color also matches Handlebar and I think that it was a very good product.
The bad point is not this product, the Screw was very hard on the car body side. Because it is incompatible, I went to Dryer and went slowly with Full power slowly. Goods are good and Quantity : I bought 2pc.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Navigation installation etc etc. To
【Review】
Convenient to install Navigation etc.
The hexagon that holds Handlebar is hard (Screw Lock is used) So do not lick screws
[Content points]
Cheap price
[Unhappy point]
If Bolt's hole has Blind lid, water will not enter
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
I am useful.
We installed at the base of LeftGrip of Ninja 1000 and fixed the portable Holder and USB port. As for installation, it was still difficult to remove Bolt that was originally attached. I will try installing it for Right Side in the future. View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
It purchased in order to attach a Navigation to Ninja1000 of its own car. More than it considered, there is a profound feeling, and it was able to attach firmly! Although a future Touring is not related to ♪ goods which are pleasure, in
It purchased in order to attach a Navigation to Ninja1000 of its own car.
More than it considered, there is a profound feeling, and it was able to attach firmly!
Although a future Touring is not related to ♪
goods which are pleasure, in order to attach this, the existing Bolt must be removed, but this is hard! It is hard without a hamper (smile)!
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
purchased in order to attach a Radar and a portable holder to Ninja1000 -- that in which a little prices of quantity are is [ -- ] a difficulty although I think that it is the optimal Items for attaching various Accessorieses to the circumference of
purchased in order to attach a Radar and a portable holder to Ninja1000 -- that in which a little prices of quantity are is [ -- ] a difficulty although I think that it is the optimal Items for attaching various Accessorieses to the circumference of a Handle
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Although goods are as expected, they are one Bolt and one Stay, and they are 1890. It is honest delicate price setting out. It is necessary to remove the Bolt of Handle inner side. When removing, it went up to the Step, and the Towel
Although goods are as expected, they are one
Bolt and one Stay, and they are 1890.
It is honest delicate price setting out.
It is necessary to remove the Bolt of
Handle inner side.
When removing, it went up to the Step, and the Towel was wound around the hezagonal wrench of L character (Wound prevention of a Tank), and the whole pile was applied from the top.
It was able to remove alone somehow.
(Smile)
View detail
Since iPhone was fixed to a motorcycle, it purchased. It seems that the goods here are not dealt with by Webike now in March, 2010 although the holder only for iPhone (TM-AR001) is also owned. A photograph photos from a side face what attached the
Since iPhone was fixed to a motorcycle, it purchased.
It seems that the goods here are not dealt with by Webike now in March, 2010 although the holder only for iPhone (TM-AR001) is also owned.
A photograph photos from a side face what attached the holder only for iPhone to the handlebar mount.
Structure is rather strong.
Attachment to a handle is also carried out quite firmly.
Texture is also good touch.
Since it is fixing with the hexagon-head screw compared with the mounting system of a sygn house, angle adjustment takes time and effort a little.
However, does this neighborhood become the trade-off with robustness?
The price of the back is a neck for a while.
View detail