Reviews
ram OEM-RRGrip
The OEMGrip on the Gixxer SF250 was a little slippery and thin, so I replaced it. The unique design of the ScrewScrew makes it easy to grip and prevents slipping. I am also satisfied with the Large size because it is cost-effective and seems to last a long time. View detail
The Axel side is thinner
It feels much thinner when replaced from the OEM's thicker Grip
And Quantity:Pair (for Left and Right) There is a difference in thickness in ... the Axel side is thinner ... why?
Once removed, Quantity:Pair (for Left and Right) If you compare the thickness of the Rubber with a finger across the
A Lead is Quantity:Pair (for Left and Right) Against the degree of difference in
The OEMs are so thick on the Axel side that you can clearly see it
That's what it seems to be all about
Pattern of the File eye is preeminent Hold feeling, but it seems to be early to be shaved
But it's not expensive (nor is it cheap), so you can easily replace it when it's low
The Grip of the TDM900 is 130mm, which is not often seen in Aftermarket parts There is no size
I hope it doesn't become a discoon and continues if possible
If there's an Up date, I'd like to see the Axel side of the equation get a little thicker
View detail
The Grip is good
Quantity:Pair (for Left and Right) The Grip of the f800s was worn out and the heater of the Left Side did not work, so I decided to replace it The Grip of the f800s is uneven on the inside of the Grip, but the one I bought is not flat I shaved the barrel side of the handlebar to fit it The diameter was right View detail
Cheap and satisfying
It seems that it was made for Boxer of BMW, but it is about 5 mm long. I cut it and added it. It is saved because there is no Grip Bar only setting in OEM Parts Number with Grip heater. View detail
Surely the feel is nice.
Although it is Hard, it is pretty soft, it feels like a rice cake.
It seems that vibration is attenuating slightly, so it is surprisingly good for Touring use as well.
However, it is not only soft but also somewhat like Kosi or a feeling of elasticity There is nothing to disagree because too much going on Circuit driving.
However, there is not much durability, half a year from use ? The part where the mountain disappears in about 2,500 kilometers has come out extensively.
By saying motogp, the durability is not thought so much with Fe Ring first.
Personally, the durability required for Grip is quite insufficient so I guess it is unfortunately not next time.
Even durability was what I wanted to use again if I cleared it.
View detail
Is it moderate softness?
It is a feeling that it is not hard, it is not soft either.
The surface feels soft to fit gloves moistly, but when you hold it there is a waist, I feel secure. I just got it, so I'm looking for how durable it is. (I think that it seems to be quite possibly)
View detail
Fits: KAWASAKI GPZ900R NINJA, KAWASAKI Z1000, KAWASAKI Z1000, SUZUKI RG400 γ, SUZUKI RG500 γ, YAMAHA SRX400, YAMAHA DIVERSION400, YAMAHA DIVERSION600, YAMAHA SRX600, KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI Z1000, KAWASAKI Z1000, SUZUKI RG400 γ, SUZUKI RG500 γ, YAMAHA DIVERSION400 [DIVERSION]., YAMAHA DIVERSION600 [DIVERSION]., YAMAHA SRX600, SUZUKI RG400 γ, SUZUKI RG500 γ, YAMAHA DIVERSION400 [DIVERSION].
It does not replace OEM Product
In case of SRX OEM Product and Gold amount did not change, but I tried using it. I do not have any problem on the quality feeling and I used hundreds of kilos, but there is no leak. I think that that point is good because Grease is attached.. You have to be careful on the back and front of Seal. View detail
Ariete A Lead OEM-RR RACER to YAMAH
We exchanged Grip for exchange due to wear of Throttle cone.
I felt like using the ariete OEM - RR RACER, so this time I made it to YAMAHADesign of the same series.
Since we already made Throttle and Handlebar Penetrating, exchange old grip cut off with Cutter Just spot it without painting Chain cleaner inside Handlebar surface and inside of Grip. I have never used any glue, but I think it's durable Large.
YAMAHADesign is thicker and more flexible than RACERDesign so I think that it is suitable for Touring I am looking forward to the feeling of running in the future.
I made it to YAMAHADesign according to Motorcycle, but it is not so fancy as possible with a modest design.
View detail
I started to blot out a little..
Although it is only VT, which has been only a few months since the exchange, Fork oil adherence has become visible to a little Inner part (' - Ω - `)
Since the point Rust was somewhat in the Inner part, is not it fairly good if you have 2 months?
Although it was not bleeding to worry about, I decided to exchange it together because the Inner part removed from the part pickup vehicle got in (handled as ` - Ω - ')
Although it is the amount of Oil this time, I felt a bit Stroke was astringent in the prescribed amount we put in the last time so put Oil in a soft item and tried to make it a little less.
Dirt was seen inside, so I cleaned up at the same time.
It took about 2 days to run about 500 km while assembling, while adjusting the Air inside the Fork on the Service station, confirming that leaks and bleeding disappeared and the work is completed.
In the Oil seal of the OEM, there was Rust, it had spread quickly from there, but this Oil seal was pretty good as it was usable for 2 months without leakage.
It is said that Fork in a neat and beautiful state seems to be able to use it for 1 and 2 years without problems.
The person who replied SR previously can still use without leaking ヾ ('∀ `*) A
View detail
He bought it for crack prevention of a Tank. It was good to become an One point of a Motorcycle although having stuck straight was serious. To crack prevention, it may be slightly small.
He bought it for crack prevention of a Tank. It was good to become an One point of a Motorcycle although having stuck straight was serious. To crack prevention, it may be slightly small. View detail
It carried out now which was purchased and was kept for a while. Since time was made and he understood the method of OH, Oil seals were exchanged. Especially, it could do satisfactorily, and attachment does not have an exhaust air omission, oi
It carried out now which was purchased and was kept for a while.
Since time was made and he understood the method of OH, Oil seals were exchanged.
Especially, it could do satisfactorily, and
attachment does not have an exhaust air omission, oil leakage, etc., either, and was finished (since it is a new article do naturally?).
I also regard
Sas's motion as a Smooth a little.
The
price is also handy and satisfactory.
View detail
It was good exactly also in size, and the color of the Tank was finely transparent, the Design was also visible, and it was very beautiful.
It was good exactly also in size, and the color of the Tank was finely transparent, the Design was also visible, and it was very beautiful. View detail
Since it was reputation that the Honda form it was [ Honda ] conclusive factor that was cheaper than the pure estimated cost will also be the same 2012 / as of August and it is soft in play [ other ] in fact. Perfect, when you think whether
Since it was reputation that the Honda form it was [ Honda ] conclusive factor that was cheaper than the pure estimated cost will also be the same 2012 / as of August and it is soft in play [ other ] in fact.
Perfect, when you think whether to be liking and it purchases! Although based also on
liking, since an authentic positive one was the same form as an Off, since DR-Z400SM was not so pleasant, it was exchanged in the Road this time.
It is thought that the product here of form was good and the pain and tiredness of the hand reduced it.
View detail
[Webike Monitor] Before , I was allowed to purchase [ ZX-10 or ] and the ZEPHYR400 also chose this time also. Since the delivery date of brand-name parts is taken although the actual thing has not been compared as it is pure, made in A
[Webike Monitor] Before
, I was allowed to purchase [ ZX-10 or ] and the ZEPHYR400 also chose this time also.
Since the delivery date of brand-name parts is taken although the actual thing has not been compared as it is pure, made in Alito has been purchased.
After exchange does not still have oil leakage ZX-10, either, and it is making the same Alito Fork seal as
last time into the kitchen.
I think that I will continue using the Manufacturer which is individually reliable too.
View detail
[Webike Monitor] A Honda type is purchased although it is a Motorcycle of the SEA BASS. It is good for the form of the Grip to be little by little thin toward the outside to an inner side. It is the form which is easy to operate it.
[Webike Monitor] A Honda type is purchased although it is a Motorcycle of the
SEA BASS.
It is good for the form of the
Grip to be little by little thin toward the outside to an inner side.
It is the form which is easy to operate it.
View detail
Since the ZRX1100 fork was diverted to the other vehicle type, I purchased for the overhaul. Although there is a completely same size and a parts number is different, only this parts number is slightly expensive. Texture and structure are completely diffe
Since the ZRX1100 fork was diverted to the other vehicle type, I purchased for the overhaul. Although there is a completely same size and a parts number is different, only this parts number is slightly expensive. Texture and structure are completely differerent from genuine. I think attached exclusive grease is important to make this product efficient. I was also able to put it satisfactory like a genuine. I think that I will see from now on a situation since the reduction of durability enhancement or friction is the merit of this product. View detail
I thought that I planned to exchange the grip near an original manufacturer's product in all black, and while looking for many, I found this. A slanting slit is only reverse and the appearance is almost same. Although I don't compare with a new car, this
I thought that I planned to exchange the grip near an original manufacturer's product in all black, and while looking for many, I found this. A slanting slit is only reverse and the appearance is almost same. Although I don't compare with a new car, this one has a soft feeling and grip feeling is good. Since this one is cheaper, I would like to exchange in about 10,000 km, although the structure of genuine is more frim in details. View detail
ZZR400 was equipped to serve also as the dress-up of the protect effect from a jacket, the fastener of pants, etc., and appearance up. It is large, and the cover range became a sporty and has also satisfied appearance.
ZZR400 was equipped to serve also as the dress-up of the protect effect from a jacket, the fastener of pants, etc., and appearance up.
It is large, and the cover range became a sporty and has also satisfied appearance.
View detail
Although the barrel type grip was attached until now, grips were also exchanged with handle exchange. Although the barrel type had barrel type merit, the simple grip here also adapted itself to the hand softly, and also tended to operate a thick winte
Although the barrel type grip was attached until now, grips were also exchanged with handle exchange.
Although the barrel type had barrel type merit, the simple grip here also adapted itself to the hand softly, and also tended to operate a thick winter glove, and I felt that a road condition was known immediately for it.
View detail
Although it exchanges and is still two days, for the moment, there is also no leak and it is favorable. Since it is not so sensitive as a difference is known about operation, he has no problem for the time being. Since the price is cheap compared
Although it exchanges and is still two days, for the moment, there is also no leak and it is favorable.
Since it is not so sensitive as a difference is known about operation, he has no problem for the time being.
Since the price is cheap compared with an original manufacturer's product, it can exchange freely and is satisfactory.
If it can do and there is also a lineup of a dust seal, in addition, I am glad.
View detail