Reviews
Service Reminder Reset for New Model GSX1300R HAYABUSA
[How is it used?
Recently, many manufacturers have adopted a system in which the Lamp on the Meter lights up when it is time for maintenance.
Various foreign car manufacturers, especially Ducati, are doing this.
But recently, domestic cars are also becoming like that:you have to drop Gold to the Dealer to get rid of the Lamp. Is this part of the Dealer's business strategy? So, even for a simple oil change, if you don't go to the Dealer to have it done, the maintenance Lamp is still glowing all the time.
is Japanese pampas grass, a simple homemade one is all that is needed to solve the problem.
Was the one you received as per Image?
As per Image
It's better to buy it with other things. Since it's only about $100 anyway, the actual store is a better deal when shipping is included.
How was your experience with it?
Effective.
[Points to note]
You have to insert it deep to get it to work.
How did it compare to other products?
Nothing in particular to compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
In doing the work, this method is probably a maintenance procedure that is not covered under warranty.
If you want to be stingy with your Gold, please use it only as a reference.
If you are a little worried about the work, you should still buy the OEMReset switch.
OEM reminder Reset switch
09930-83130 Available at Webike, but currently out of stock?
By the way, in most cases, they fail.
It will not respond unless it is inserted firmly and deeply.
Then press and hold the LeftSelectSwitch▼Button to open MENU, select SERVICE, MODESwitch to determine RESET, which is not usually displayed, select Yes when Yes/No appears, and then you can set it individually!
View detail
Large capacity
[How is it used?
Bullet Type Terminals are required for USB power supply and other wiring processes, but of course Bullet Type Terminals are used up.
Quantity:I bought a set of 30pcs. or something like that, but I found that I had no Bullet Type Terminal on hand and had to stop working on it, so I bought Quantity:1 Set of 100pcs.
How was your experience with it?
It is an ordinary Bullet Type Terminal made by Emon, which can be easily obtained at Home center.
100pcsQuantity:Set is not readily available around there, so I purchased it on Webike.
How did it compare to other products?
No specific comparisons were made.
[Points to note]
Sleeve for waterproof is not included, so you need to prepare it separately if necessary.
【Review】
The Large capacity is recommended for those who do a fair amount of DIY Wiring work.
It is better to store them in a 100x box because they may be lost if left in the bag.
View detail
It reflects beautifully!
I purchased this product to increase safety as I drive more at night and use it attached to my Rear Fender. I think it contributes to safety because of its beautiful reflection. It is easy to process and can be cut into any shape you like. I also put it on the color cone in my garden. It can be used in various places, so I can recommend it to everyone. View detail
Used to extend BlinkerWiring
Used to extend the Right Side wiring as it was too short when replacing the Rear blinker.
Naturally, we were able to extend it without difficulty.
View detail
Ideal for Repair
I purchased this product to refresh a MotorcycleParts terminal cover that was given to me by a friend because it was yellowish and deteriorated. I recommend periodic replacement of the cover because many people use the cover for many years without replacing it, causing it to become damaged and short! View detail
My savior who mistakenly cut off CUB's Wiring
I bought it because I had mistakenly shibered CUB's RegulatorWiring.
The shape is exactly the same as the Coupler of the C50OEMRegulator.
However, please note that the OEM is like a double cord, so the attached terminals cannot be used.
View detail
Motorcycle Wiring Essentials
This is a must-have item when placing a Relay on the Seat and extending the wiring from under the tank, through the Engine sturdy, to the Handlebar on the Front. It protects the wiring from rain and heat and prevents unnecessary troubles. View detail
good qulity
This is including baral fuse .Very good qulity outer matirial.eazy to fix without any modification.amon produts are always good for DIY enthusiasts. View detail
Good and tiny design
I brought long time ago.But ididn't get time to install.This is push on switch (normally open) Finally I get time to do my DIY projects.I used as a car horne switch controller. Very tiny and solid design. On switch top printed "push on". switch operations is smooth. Made in Japan product.Recomenderd for DIY projects. View detail
Wiring as usual
[How is it used?
I had been using it for wiring work and bought it at Home centeretc. when I noticed it, but I ran out and had plans to shop at Webike, so I bought it along with the other products.
Fine wire 0.5sq is used for those with low power consumption, while Others basically use this 0.75sq.
[Was the product you received as Image?
It was just like the picture.
I always use the safe Black Wiring.
How was your experience with it?
This is a standard Wiring Cord, so the product is solid.
Emon's Wiring Cord allows you to hook up excess wire with the Holder, so you don't have to worry about it being RoseRose the next time you use it.
【Review】
It is inexpensive, readily available, and of consistent quality.
It is also convenient to keep Wiring together.
I always use Emon's Wiring because it has no problems with heat resistance, oil resistance, etc. for use on motorcycles.
View detail
Before running short on the way to the car parts store!
I had it in a 20-pack, but I started working on it, ran out halfway through, and had to run to the car parts store.
They are not expensive, so I should have bought a 100-pack from the beginning, considering that I would have lost efficiency if I ran out halfway through the process.
View detail
Unwavering Reliability & Quality 2
Unwavering Reliability & Quality 2
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Unwavering Reliability1
Unwavering Reliability & Quality
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Wiring Protection
Purchased to protect AntennasCable for ETC, though it was a challenge to get it through the Wiring Tube,
Once we got it through, it was ours, and Wiring was a breeze.
It also protects the Cable, so it kills two birds with one stone.
View detail
For easy power pickup
Used to get power for drareco
Easy power supply from Fuse box
However, the Wiring is caught on the Cover, so a little modification is required.
View detail
Cost-effective and time-saving
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many rectification diodes available, but we chose this one because of its reliability and the cost of taking out and producing it, considering the time and effort required to make it.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
Reliability used to date
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many inexpensive Relay products available, but we chose the smallest and most reliable one we have ever used.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
You can make it yourself, but buy peace of mind.
Useful for DIY of electrical components
Frankly, I could easily make something similar myself.
I use ready-made products because they are somehow safer.
View detail
For Wiring Processing
This is essential for Wiring processing.
They are inexpensive and come in a variety of colors, making them very useful.
View detail
Small size, so it can be put anywhere.
The reflector for the DAYTONA-made License PlateFrame had somehow flown away, so we have attached this one in its place.
MONKEY has a built-in reflector in the Tail Lamp, so it is not necessary in the first place, but it is nice to have.
It has a cheap feeling, but for those who are not particular about it and want it anyway because it would be illegal without it, it is good because it is small, so it is not difficult to find a place to install it, it can be detached, and it has a Tape.
View detail