Reviews
Fits: SUZUKI V-Strom650 L2, SUZUKI V-Strom650, SUZUKI V-Strom650 XT, SUZUKI DL650 V-Strom, SUZUKI V-Strom650 L2 XT
Engine Guard installed
Installation should not be a problem if you have some knowledge of maintenance.
An Engine Guard was added to protect the engine in the event of a runaway and to mount the Fog Lamp.
View detail
Fewer options compared to CB1100
I purchased a CB1100RS Final edition, but the poor loadability is a Large problem that could lead to a decrease in my desire for Long touring. (This is my personal opinion.)
I thought I needed a rear box, so I started by looking for a current available carrier, but the OEM product was already discontinued during the CB sales period …HURRICANE had stopped accepting orders, etc. The only ones I could find were Endurance and Hepco, which are semi-OEM products. I found only Endurance or Hepco, which are semi-OEM products.
Once again, I felt the disparity between the recognition of the unbranded CB1100 and that of the late modelrs.
Personally, I liked the SMART look of the HepcoMini Rack better than the firmly design of the Endurance, but it's just too expensive.
…。
Also, the Painting was even and the welding was carefully done and satisfactory, but the accuracy of the installation seemed to be lacking.
Split Quantities:Pair (for Left and Right) After attaching the carrier bar to the body of the car, I put the rack plate on the car. (I almost got it by brute force.)
However, the fitted appearance is good!
The Seat is horizontally connected from the Seat almost horizontally, and it seems that even a large Seat bag can be used without any difficulty.
However, I have a GIVI that I unloaded from my previous Motorcycle and wanted to operate it! (at your own risk).
The Mini Rack has a few holes and gaps that can be utilized without modification. The weight capacity of the Mini Rack is up to 5 kg, so we will use it only to the extent that we do not put a load on it.
View detail
Fits: TRIUMPH Thruxton R, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Speedmaster, TRIUMPH Street Twin, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100 Black, TRIUMPH Bonneville T100, TRIUMPH Thruxton, TRIUMPH Speed Twin 1200, TRIUMPH Speed Twin 900
Compact.
Installed in my wife's car 。 He has never had to stand up and walk away before, but he said he feels uneasy without it. 。 We selected Engine Guard with a sturdy-looking three-point stopper to support the vehicle body and protect the legs in the event of a fall.
Color in the picture on the Product Page:It looked Gray, but it is actually Black as the description says! 。 It is inconspicuous in the black of the vehicle body, but when you stand astride the Motorcycle, it sticks out just enough to ensure that you can cover your knees, giving you a sense of security. 。 Although quite pricey, the sturdy-looking Pipe is painted Beauty and has a convincing texture.
I had it installed at the shop when I took delivery of my new Motorcycle, because I didn't want to damage it! 。 One of the lower of the two front locations bolted to the car body and the Quantity after the Engine.:Pair (for Left and Right) I am confident that if I had installed it myself, I would have added a Wound somewhere in the one place where the two are connected.
View detail
Moderate Large size
Installed in my wife's car 。 Bobber was chosen for its style, but he doesn't want to give up camping touring.
It is not large enough to hold a box, but I think this size is the limit for a Bobber style motorcycle, and it may be large enough to hold a bag. 。 Fixing to the vehicle body is done at the tips of the Parts and the Quantities near the PartsCenter.:Pair (for Left and Right) 4 locations in total at 。 The structure protrudes backward, and there is no support directly under the cargo area, so you can sense that it is not recommended to carry very heavy items. 。 In that sense, you shouldn't load a Box or anything like that.
I had it installed at the shop when I took delivery of my new Motorcycle, because I didn't want to damage it! 。 The structure around the PartsCenter is fixed to the reverse side of the Frame, so if I had done it myself, I probably would have damaged it somewhere.
View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
Wow that's cool
Was the one you received as per Image?
It looks really good on the SV, so much so that it looks OEM.
Was the installation difficult?
I pulled out the existing Bolt and installed it, but the picture in the Manual was confusing and I pulled out a different Bolt.
I thought it would be a good idea to check Net for photos of the installed condition before the work is done.
How was your experience with it?
I had to slowly let the Left Side fall to the ground at home,
Clutch lever and Bar End are scratched, but Shift Pedal is intact. If it is a standing fire type, it is surely effective.
[Included Parts:were they on?
neither too much nor too little
[Was there anything that disappointed you?
None at all.
[Opinions and requests to Manufacturer
Please publish the Color code. I want to paint the scratches with the correct color.
View detail
Steady making
It is solidly made, and installation is easy by removing the Bolt from the Carrier.
It was easy to tighten the four bolts with the supplied Bolt.
The lower bolt is 13mm and the upper bolt is tightened with a Hexagonal Bolt.
45L Seat bag is a little bit small.
I flipped it over and installed it.
The fixation was done well.
View detail
Slight gap at the front joint.
The parts were installed by a shop using Webig's parts installation service. When we first consulted HondaDream about installing the parts, we heard that there was a problem with the handlebar lock not being able to be locked due to interference with the front fork. The shop did a very careful work, and during the work, it was confirmed that there was interference with the front fork due to interference with the Horn, so the shop adjusted this area. If we pay attention to this area, it is possible to install the product as the manufacturer says, but the Horn and the wiring around the Horn also need to be adjusted. The Engine Guard and Tank Guard for NT1100 are rarely produced, so I had no choice but to choose this one. I think it is a satisfactory product. View detail
Tank Guard HEPCO & BECKER:Hepco & Becker
The Bolt holes are perfect and the precision and texture are good. View detail
It would have been better if it were a little wider.
The shop did a great job and installed the parts without any difficulty. I am satisfied with the installation, but I really had no choice but to choose the HepcoAndBecker product. View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure
I can stop it without worry.
Surprisingly Large, easy to install, and can be unthinned and STAND. View detail
Fits: SUZUKI DL650 V-Strom, SUZUKI V-Strom650, SUZUKI V-Strom650 L2, SUZUKI V-Strom650 XT, SUZUKI V-Strom650XT
Side Stand End
[How is it used?
Used at every stop
Was the one you received as per Image?
It fits and feels just as I expected.
How was your experience with it?
No problem at all, I don't have to use another Plate anymore, which is great!
[Points to note]
None
How did it compare to other products?
There is no comparison. This was the only product available for the specific model of the car.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
1Quantity of hard work:2pc
Bolt1Quantity:I installed it with 2pcs. Is it the accuracy of the product or are Japanese people too detailed? I had a hard time installing it.
I installed the DL1000 V-STROM because I could not allow the Oil Filter of the Engine to be seen in its entirety.
View detail
Meter visibility has been improved.
In the OEM condition, the meter panel was almost invisible when a high tank bag was installed, but now the meter panel is visible except for extremely high tank bags. The visibility has been improved, although it is only 35mm higher than before. When I installed the meter panel myself, I realized that there was not enough room in the length of the cord connected to the meter panel, so it could only be lifted 35mm, which is why the current size was chosen.
The problem is that, in my case, the key box is in a deep position because I have also installed a WorldWalk Long Screen, and I can no longer reach it with the gloves on. Also, the price is too high for small parts made from a steel plate. Therefore, I gave it a low rating in terms of cost performance.
View detail
Looks good
The Headlight Grill frpm Hepco&Becker I purchased arrived a bit deformed, squashed (happened during shipping to my destination?) Before installing it, i had to straighten it out to fit the headlight accordingly. All in all a solid piece and it looks good. View detail
Fits: KAWASAKI Z H2
Please purchase with your Motorcycle purchase!
I used a Tanax Mini Field Seat Bag in the extended state, and when I tightened the KSystemBelt, thinking that I didn't want the bag to fall or move, the Seat was stuck in the Bag and the Fastener handle rubbed against the Tail cover (Tail cowl) when it was extended and scratched the bag. I am sorry, of course, that I neglected to take measures to prevent scratches. Of course, it is my fault for neglecting to take measures to prevent scratches.
If you think about it, I think the Bag capacity was reduced by dizzying it and it didn't fit, and if you stuffed it in, the Bag sagged because it was too heavy, and as a result, it got scratched.
If you have the Speed Rack, you can attach it tightly with the capacity as it is. I put SHAD's Top case on mine rather than a bag, and it's comfortable. It is comfortable and a helmet fits in it. If you are an owner who can attach it to your motorcycle without carrying luggage on your back, I recommend you to buy it immediately.
It seems to be Large sturdy up and down and front and back, even if it rattles around on AsphaltRepair marks and bumps when used. The only thing is that the Quantity:Pair (for Left and Right) The Plate itself is heavy and solid.
The rest is Large sturdy if you are careful to run the Bag and Case and the weight of the luggage against the allowable load capacity.
I was struggling when I put on the Songe and installed it, and the Green paint on the Frame where it hooks in the front was scraped off.
View detail
Installation by Maintenance novice
I switched from an old model Africa Twin to a Triumph TIGER1200XCX in March 2023, and what I thought was very different between the Africa Twin and the TIGER was the inclination of the side stand. I had bought a Plate for Africa Twin from Amazon, but it was not the right size, so I decided to buy a solid one from HEPCO & BECKER this time. I translated the English version by Google and found that a Hexagonal Wrench and a medium-strength screw lock agent were required, so I purchased DAYTONA's medium-strength screw lock agent from Amazon and installed it. One thing that was not mentioned in the instruction manual is that the screws are a little wobbly even after installation. My impression after using it is Maybe this gluttony is assorted." That is what I was told. I don't know if that is correct, but so far it looks good, and there is no interference even when the Side Stand is folded down. I think I made a good purchase. View detail
Be prepared for the "what if?
I don't think it is strong enough to withstand Gymkhana, but it seems to guard Body and Engine well in case of a standing fall or a minor fall. It looks stylish and I am glad I installed it. View detail
I'm so glad I bought it!
I'm so glad I bought it!
Design and gravitas were also great!
I know that many people use Fender for DAX, but I was looking for something that I could change without changing it!
Recommendation! I'm glad I bought it because it changes the atmosphere a lot!
If anyone has any doubts, please refer to this page.
View detail
It was worth the wait! Recommendation!
I am very happy with the quality and design! The fit is great and I am amazed at the quality!
If you are wondering about buying it, it is worth buying!
View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
These are the Items I wanted!
I have been wanting these Items for a long time.
The installation is only to fasten Bolt, but since it is where the Engine is fixed, it requires force to loosen it, and it is also dangerous if it is not fixed Firmly.
It will look a bit lumpy after installation, but that is a sign that it is protected, so it looks cool.
It is reassuring to know that Guard is there to help in an emergency.
View detail