Reviews
What does Speedometer do? ・・・・
Speed display is naturally functional enough
But the Light on the Meter display at night is too dark.
The needles are hard to see, and the Odometer is nearly invisible.
There are many recent products that use LEDs, so if you are thinking about nighttime use, it would be better to buy those products.
View detail
Lowdown rate is high
Footing will improve DrumstickDrumstick.
Low and longStyle is decided if you are a longsuited person.
View detail
Dress-up
I wanted to replace the OEM RedCap with a Vintage plug cap.
Terminal nut was needed on the Plug side.
View detail
Cost-effective! Well made!
I bought this Mirror because Shovel's Mal Mirror was RustRust and difficult to see.
The clamp portion had the same shape as the existing Mirror and was easy to replace.
The visual quality is only slightly better, but the Square Mirror alone makes the Image more rigid.
Since it is cosmetic, it is good to replace it when it gets rusty or tired, as the mood strikes.
View detail
strong
I use Fender Eliminator to prevent the License plate from bending.
Material:The carbon style is also designed to look tight.
The Body is made of FRP, so it is very light and strong.
View detail
Replace as they deteriorate over time.
The Fuel Cock was replaced because it had become clogged due to aging.
It will be a complete set of OEM compatible Fuel Cock.
good point
Since it is OEM compatible, screw holes and other dimensions are the same as OEM. Easy to mount.
I have been using it for 3 years and have no problems.
It is easy for OEMs to search for individual products.
A bad point
●As a precaution. When replacing the tank, be sure to remove the gasoline from the tank. Because it leaks.
If you see Gasoline seepage near the carburetor, you should also check the Fuel Cock.
And this is a complete set, so replacement is easy.
View detail
I've been using it for a long time.
I've been using it for a long time now, and I think it's a great product, no deformation and Large odd. And it is inexpensive. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Exactly!
I bought it because I needed it when replacing the Exhaust System.
Easy to install and brilliantly positioned Exactly and Center Stand.
Here it comes.
View detail
On a 5-inch Seat.
One of the few Seats that can be pontooned onto a Type 5.
It is nice that there is no gap between the OEMTank and the OEMTank.
Seat is stiffer than OEMSeat and has better footing.
The heels of both feet are sticky.
Installation was easy.
I also expect Seat to be durable.
View detail
It was easy.
I put it on Seat's Accent.
It is not something that works, but it is a little Retro.
View detail
EventuallyQuantity:Use only 1pc.
I purchased this product to change the diameter of the Exhaust System.
There were three of them, but I ended up with Quantity:Only 1 pc. was used.
View detail
Replacement and machining of aged Coupler
We decided to replace the 3-pole coupler on the Speedometer side, which had deteriorated significantly over time. In addition, I decided to take out the necessary wiring directly from the coupler to cancel the intermediate harness of the Shift positionIndicator, which was in the way. Since I had just replaced the 6V MONKEY/GORILLA Main Harness the year before last, the Coupler on the body side was in good condition, so all I needed this time was Female. Quantity:I was going to buy the Set stuff, but I found a product that was just the part I needed.
For the replacement work, the wiring of the old Coupler is cut off at the root, and when the terminals are newly installed, the wiring cut off from the middle harness is added to each terminal, and the quantity is changed from one terminal to the other.:I finished by plugging the terminals into the new Coupler so that the 2pc's Wiring comes out. Now I can connect the Shift positionIndicator directly without interrupting the intermediate Harness, and the Wiring of the Front is a bit Refreshing.
The body texture is not bad, so it can be used normally without any problem.
View detail
I bought as many as I needed.
We decided to replace the 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since the coupler on the body side was in good condition, only the female coupler was needed this time. Quantity:I thought about buying a Set item, but I found a product for only the part I needed, so I bought this one. I cut off the wiring of the old coupler at the base, installed the terminals I bought at the same time, and inserted the terminals into the new coupler one by one while checking the color of the remaining wires on the old coupler. The texture of the body is not bad, so unless there is an Accident in the future, it will not have to be replaced until the car is scrapped. View detail
OEM same etc.
I decided to purchase the Decompression cable as well. View detail
Fits: YAMAHA V-MAX 1200, YAMAHA SR400, YAMAHA SR500, YAMAHA XT500, YAMAHA YB-1
Not compatible with YB-1
It is not for YB-1 but probably for YB-1 four. I couldn't use it, but the texture seemed to be adequate.
(Right image is OEM, Left is this product.)
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Recommendation to use with AIS Cancel Plate
The SR400 Final Edition did not have an exhaust system that was compatible with the vehicle inspection, so I had to do some research and came up with this exhaust system.
I'm new to both motorcycle and customizing, so I was a little intimidated by the idea of replacing my exhaust system for the first time, but the installation process was much easier than I expected.
At first, I was surprised at how large the Normal muffler sounded. I thought I'd get used to it, but after about 100km, it still bothered me, so I decided to take countermeasures.
After a few days of installing the Exhaust System, I installed the AIS Cancel Plate that came with the kit when I purchased the Exhaust System. The installation itself was a pain in the ass and a pain in the ass. I regretted that I didn't do it, but after installing the AIS Cancel Plate, the exhaust system's after-fire yell was almost gone.
First of all, the bass sound is quite stable and AfterFire ya. "BALIBALI" The crisp bass sound is pleasant because it is not audible.
I thought it would be more complicated than NORMAL, but with the cancellation plate, things have changed quite a bit.
View detail
exchange
In conjunction with the replacement of the caliper, we replaced it with a brembo compatible one.
The color of the corners peeled off when tightening, and since it's aluminum, you have to be careful not to overtighten.
View detail
Priceworthy accuracy, rare and excellent design
This is an EMGO product from Taiwan, which is famous for its Re-Product.
The M6 ShoulderBolt for lever fixation is a rare DomeHead type that understands the old car lovers.
There are two things I am not happy about.
1. The position of the fulcrum hole of the brake lever is slightly off, so it does not fit into the holder exactly when the brake is returned. (Tolerance is acceptable and there is no functional problem)
2. Cable AdjustingBolt and Holder are hard due to inaccurate screw cutting, and need to be adjusted with M8Tap and Dice. (After correction, it turns smoothly.)
Still, I am very satisfied with the overall product and would buy it again if I need it.
View detail
Fits: YAMAHA SR400
GOOS for SR
I wanted an Exhaust System for my 2019 SR400, so I replaced it.
It was not a Japanese Vehicle Inspection Correspondence, so I removed it immediately.
The volume is a blast of sound that only a single cylinder can produce. () It is
I was not satisfied with the OEM Exhaust System as I could only hear a little sound.
The sound is not that loud and pleasant when you turn it.
I was not sure about DAYTONA, but I decided to goos for SR400.
Recommended
The price was a little steep, but the workmanship was real!
View detail
It's not just about looks.
Lowdown suspension.
Since I have a Ronsui, I need to lower the suspension, so I went with a lowdown suspension.
This product is effective in dumping. So there is no degradation in corner performance, which is common with lowdown suspensions.
good point
It's easy to run the Corner ring.
The vehicle body does not get out of control due to road surface gaps, which is common with lowdown suspensions.
It is cheaper than other suspensions. It's cheaper than other suspensions, so I'm not nervous about replacing it.
A bad point
STAND needs to be Short Type.
Lowdown tends to prioritize looks, but that is not the case with this one. It is a good suspension.
View detail