2%er Motorcycle Motorcycle Parts Reviews

Filter

Write a review and get Webike Points!

Reviews

2%er

30 Aug 2022

Seesaw Pedal Kit II

Fits: YAMAHA SR400, YAMAHA SR500

Japanese Webike user

4/5

A product for which one's tastes differ

[How is it used?
It is suitable for Motorcycle for complete street riding.
I wanted this one because I have been using Seesaw Pedal on all the Motorcycles I have ridden.

Was the one you received as per Image?
The image is roughly as shown in the image, but the plating process is more beautiful than I had imagined, and in a good way, I was disappointed.

Was the installation difficult?
The OEM Shift Pedal is a 10mm Hexagon Bolt and this product is a 5mm Hexagonal Wrench, so be aware that you will need two tools.
The angle of installation should be easy to use by straddling the motorcycle before bolting on, and be careful not to hit it and move it on its own.

How was your experience with it?
It can be operated with any type of shoes, so it can be ridden with leather shoes or lace-up shoes.
However, be aware that if you are used to the existing Pedal, you may end up Shift-ing on your toes.

[Included Parts:were they on?
The front and rear rubbers and mounting bolt also arrived assembled, so they can be easily replaced without modification.

[Was there anything that disappointed you?
If I had to say something, I'd say that the vehicle I'm driving is an older model, with a duller suspension.
The plating process is so beautiful that newer cars may not have it, but older cars may look a little lifted if they are not clean.

Other items that would be helpful
Point and hang of installation
The working position is very low, so it is recommended to work on the ground with a terraced ball or similar.

[Availability and clarity of the Instruction Manual
There was no Instruction Manual, but it is not difficult because all you have to do is remove the existing parts and install this product.

[Notes]
The angle of the PARTS is also changed, so the feel of the operation changes, of course.
Be aware of the changes and operate the machine while making sure it is safe.

[ITEMS TO BUY TOGETHER
I can't think of anything in particular, but it would be an area that is not often seen or touched, so it would be possible to buy inspection and cleaning tools.

[Opinions and requests to Manufacturer
Nothing in particular, but if I may say so, I think it would be suitable for older vehicles if the finish were a pear finish with a certain degree of gloss. View detail

Aluminum Short Clutch Lever / Holder Set

2%er

01 Aug 2019

Front Fender Upper Bracket

Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500

Japan User(translated)

4/5

A product for a slightly different purpose, but it's an itchy one

I have a CHIC DESIGN Vintage front fender installed, and it's pretty tight Because of the tight height, I bought it as Up Stay. 18Inch Fender for 19Inch I thought it would be listed at about the same level, but if you read the description section carefully, you'll see that it's a high TireHeight one It was only made to correspond to the extent that it was made to support, and it was only about half-Inch Up in real terms

The Fender doesn't interfere with those who have a high-height Tire installed Recommendation, but if you expect 1Inch Up, as I do, it's not the right use

One-off would probably cost twice as much as this, so the price is pretty low

The bracket is thick enough to withstand the vibration of the SR400 and not break so easily I think

However, the 6-corner Nut was brilliantly not in there at all I was able to deal with it because I had a surplus at home, but I felt bad for myself for tearing the packaging prematurely without checking, but before I opened the package You should check it out carefully View detail