Reviews
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
Fits: HONDA XLX250, HONDA XR200, HONDA XR250, KAWASAKI KL250, KAWASAKI KLX150, SUZUKI DF200, SUZUKI SX200, SCORPA T-RIDE 250F, HONDA CRF150R, HONDA CRM250AR, HONDA CRM250R, HONDA FMX650, HONDA SL230, HONDA XR250 BAJA, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230, KAWASAKI KL250, KAWASAKI D Tracker, HONDA XR250
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
I used it on Cushion for a chair.
This is the third time I have used this Seat sponge.
At first I used it to improve the OEMSeat of the Initial Model Grom, which was a pain in the buttocks.
Reference https://imp.webike.net/diary/205834/
The second one. Torture Seat" The Seat of KLX125 (Initial Model) was used to convert the Seat to a wider Seat. It took a lot of time and effort, but the result was satisfactory.
This is https://imp.webike.net/diary/205834/I showed how to do it in
The third time I used it to improve Cushion for chairs.
The Cushion for home use has a very soft and thin Sponge, so it quickly becomes floppy.
Therefore, we decided to substitute the Sponge with this product, which is a urethane product for motorcycles.
First, take out the Sponge inside from the Cushion.
Shape the eyeNetSponge to that same shape.
Cutter knives are often used to cut urethane sponge, but it is always hang to use new ones. If the teeth become even slightly rounded, the sharpness will deteriorate.
This time I cut it with Large type scissors because it is thin.
Two sheets were not enough, so I also used leftover eyeNetSponge that I had saved.
Bond is used to attach eyeNetSponge.
When the shape is the same as the original Sponge, place it in Cover to complete the process.
Feeling of use
Hmm? Better, but still not good enough.
Songe lacks thickness.
A thickness of 2 cm does not seem to be sufficient to create a comfortable seat that wraps around the buttocks.
If the thickness is 4 cm, the seating comfort would be satisfactory.
View detail
Centrifugal clutch.
I installed the clutch in my scooter over a year ago. After starting the engine, it turned out that it had quite large radial runout. I was afraid that it would jerk when starting, but I dismantled it and have been driving the Honda for over a year. Last fall, it started jerking a bit when starting the scooter, so I'll have to check it out by spring this year. -------------------------------------------------- -------- I installed the clutch in a scooter over a year ago. After starting the engine, it turned out that it has quite a large radial beating. I was afraid that he would jerk while starting, but I dismantled him and I have been like Honda for over a year. Last fall, it started to jerk a little while starting with a scooter so I will have to check it until spring this year. Powered by Google Translator View detail
Let's just call it RepairMaterial.
Used for OEMSeat Repair.
Seat is back to normal.
It doesn't have the performance to reduce buttock pain, but it does have the performance to reduce buttock pain.
I am satisfied with the hold feeling and as a repair material,
View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
the screen is good
I like that the clear screen is clean.
It bends well too.
It's nice that it's easy to install.
However, the screen cracks over time.
I don't know why.
However, the price is cheap so I can forgive it.
I hope the screen is not broken -------------------------------------------- --------------- The clear screen is clean. It is also good to bend. It is also easy to install. However, after time, the screen splits. I don't know why. But the price is cheap and you can forgive. I hope the screen won't break Powered by Google Translator
View detail
exchange
Fuse ran out and was replaced with a new one.
I don't use the single items that often, so it is helpful to be able to purchase the A items that I want as a single item.
View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
It is cheap and good
Used for SUPER CUB 50Custom.
I bought this for a fine, nondescript Grip. I think it is good for the price, with no smell and moderate elasticity.
The length is just right and the hole Size is appropriate and fine.
It is a mistake to ask for the same level of durability as OEM, but if it gets worn out, feel free to replace it because it is a cheap product.
View detail
Replace with new one
Fuse ran out and was replaced with a new one.
Since the frequency of replacement is not that high, it is helpful to be able to purchase a single item of the A I want.
View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Easy to replace. The quality is appropriate for the price. I think it will last for a long time.
I raped the Handlebar Grip of the LETS4 replacement.
Perhaps the grip texture is different from the NORMAL (OEM Product), but this product has a mussed texture. In that sense, it does not slip.
*Working time is 20 to 30 minutes
After chopping off the old Grip with Scissors, I cleaned the old Bond by scrubbing and wiping, sprayed Parts cleaner on the new Grip and tube, and inserted it all at once.
*You can start over.
The Axel side inevitably feels uneven when you hold it, but since it is not an OEM product, this is to be expected.
The rest are fine, a little on the Large size and sticking out.
View detail
Have been looking for it for a long time
Thank you webike for the prompt delivery!
The plastic is a little flimsy otherwise it fits well --------------------------------------- ------------------- Thank you webike for the prompt delivery! The plastic is a bit weak on the same way it fits well Powered by Google Translator
View detail
Fits: SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman
Smoke Screen, a little better Parenthesis?
For the price, I think it is good.
The formation is inferior to OEM, but the GrommetScrew feels like a Limit stop and interfered a little with Cowl's Cover, so it was shaved off.
Up close. The molding is wavy at the mall, but this is still better as the OEM was dirty from the UV rays.
View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
Exhaust System for AF34/35 with the best cost performance
2stExhaust System is a product that wears out faster than expected. "2000 AF34 71CC bore up version." Although we are using this one for the
This is the third time I have purchased this iNet Exhaust System, and it is a great match. The exhaust sound is quieter than the OEM product, the exhaust pressure is good, and when the Torque is applied, it really extends well. By the way, Intake is self-improved from NORMAL by 71CC bore up, and it marks 84km/h on flat road, 78km/h up road, and 94km/h down road by using Eye Net Exhaust System.
Of course, it is not only the performance of the Exhaust System, but it is a product that can demonstrate sufficient Potential compared to other companies' products.
Moreover, the cost performance is the best, and we can't use a bad, expensive Chamber, because it is a consumable product. Therefore, I Net products are the best in terms of cost performance, so I have decided to replace the exhaust system.
It's really helpful because I can replace it without hesitation. 。 We intend to use it in the future.
The following are some of the improvements that could be made in terms of design.
(1) Stainless Steel decorative winding is not necessary (it's contrary and tacky), Black or Color.:One solid coat of Gray is fine.
As a decoration of Exhaust System ai net I think it would be cool if there was a heat-resistant PlateLogo.
I hope you will go ahead with branding because the product is good.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
ai-net Secondary Air Pipe available Spec. OEM Type Exhaust System
Replacing the OEM made it lighter and sounded more like a 2-stroke.
We are not sure how long OEMChamber will last, and we have a motive to purchase it while we can.
Performance-wise, it is not that different from the OEM, but I am satisfied with the lighter weight and the more Chamber-like appearance.
The fixing bolt holes were correctly positioned with no gaps, and there is a secondary air pipe for the Second Type Model CE13A, so installation was no problem.
The fact that Gasket is included is also appreciated in a humble way.
View detail
Convenient
[How is it used?
Rear boxB27N was attached and used.
There are no functional problems at all.
Was the one you received as per Image?
As per Image
I also liked that the length of the bike made the impression of a motorcycle a little more "large".
Was the installation difficult?
I was able to install and use it myself at the same time I purchased the VTR. It is not difficult at all.
Attaching the GIVIMonokey base is also no problem.
How was your experience with it?
I use it with a box, but it is also convenient for loading without a box.
It is the same height as the Seat, not tiered, and the Carrier is long enough to pack a lot.
[Included Parts:were they on?
Collars (thicker Washers) are included and are interchangeable with OEM collars.
[Was there anything that disappointed you?
There is a Tandem grip part, but it is thin and difficult to hold.
Paint film tends to peel off easily (especially at Bolt attachment points).
It is disappointing to see rust progressing from where the paint has peeled off.
[Opinions and requests to Manufacturer
I would like the Tube in the Tandem grip section to be thicker.
I would like to see the painting improved.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
NORMAL style Exhaust System
Give up playing Normal muffler
Changed to NORMAL style Exhaust System
Installation went without a hitch and took less than 30 minutes!
I appreciated that there was no difference between NORMAL and LARGE in both volume and sound quality!
View detail
It is a very large size.
It seems to be quite sturdy and may require a bit of force and hang to install, but it provides a sense of security.
As the name of the product suggests, it is designed to be quite large, and may be a little too large when attached to a small VTR. (It depends on the intended use and the size of the box.)
If too large a box is used, the front/rear balance may not be good with the weight of the VTR, but this is a matter for the user.
I think the product itself is a good one with excellent cost performance.
View detail
Long Screen for GSX400
I did not want to change the style of KATANA, but I wanted to increase the wind protection performance. The height is within Plus4cm, so it does not need to be put back at the time of vehicle inspection. Note that there are two types, one for 400CC and the other for 1100CC. (The Screen for 1100CC could not be attached to 400KATANA because the mounting position holes are different.) 。 View detail
From Maru Mirror Now?"
OEM Equivalent Product of z900etc.
It was scratched from the beginning, but I don't mind (because it's cheap).
This is a replacement from z900rs whole Mirror, so it will take some time to get used to it.
Looks Shoo!" I did and loved it more than I expected.
View detail
Can be used on the Front side.
Radiator's Quantity:Pair (for Left and Right) Drilled holes in the cover and installed, completing the front and rear LED conversion. Inspired by the original:ACTIVE's LED Front Blinker + Radiator shroud kit for KATANA... Homage... Well, I made it by myself because it doesn't exist for SV650X. I am aware that it meets the safety standard (20 degrees visibility inside), but at your own risk. View detail