Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Convenient for Blinker relocation. High quality.
The Blinker was interfering with the side bag, so we used this to relocate it.
Side bag is no longer compressed.
The lighter Blinker was recommended over the OEM Blinker, so I made the change. I have driven several thousand kilometers with no problems.
I am satisfied with the high quality and practicality of the product.
I wonder if a Blinker with a Large tilt would stand up to it anymore.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
First of all, I'm satisfied.
I regretted that I should have chosen this one over DAYTONA from the beginning, but the fact that it can be installed even with Y's Gear's Rear Carrier is highly appreciated!
I can't help but feel that prices are high due to the high cost of living, but … I hope you do your best with the prices, etc!
View detail
Fits: YAMAHA SR500, YAMAHA SR400
The most natural atmosphere among side bag supports for SR400
There are various side bag supports for SR400, but Shim's Craft's side bag support feels comfortable when I put it on.
The front side uses a Seat Fixing Bolt, so it will be wobbly if the Seat is removed. When installing the rear side, it is easier to remove the License Plate.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
small change
Depends on the location of the ETC Antennas.
Light and thus interfere with Meter and
Light gaps may be wider
I just need to change the length of the Light Bracket.
Because of the similarities and differences in Size.
I am in a state of wondering what to do.
Those who wear Antennas between Meter...
Caution.
Separate handle is more delicate to install.
It is a change, but I think it will look good together.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Satisfaction that no one notices from the side
The MeterBracket is simpler than the NORMAL and I like it better. I like it. The MeterBracket is simpler than the NORMAL and I like it, but it is so normal that I don't even care about Custom↓ anymore. So far I have no complaints. View detail
Fits: YAMAHA SR500, YAMAHA SR400
Pleasant bass.
The sound is pleasantly low-pitched, not vulgar, and I am glad I bought it.
It looks close to NORMAL and Material:Polishing is beautiful and different from cheap plating.
It will be a long term relationship.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
It sounds good.
I am satisfied with the sound, it has a nice Pulse feel.
When combined with SP Tadao's PowerBoxPipe, I did not feel a drop in Torque at low speeds, which was my concern.
View detail
Nice exhaust
Well-looking exhaust with nice (but not loud) sound. There is just one heat shield for rider, and nothing for passenger. I know they are exist, but i had not found the way how to order them additionally. Also i wanted to play with mufflers sound, but could not pull out the catalysts. Installation was easy except the problems with original yoke/baggage system. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Design priority, not practical.
I love the Design and bought it with my new car purchase.
Small top case (25L) I had been using it for commuting and touring, but it broke after 5 months of purchase and 2200km of driving.
It is as slender as it looks. And since it is not made of steel, it is difficult to weld and repair…
If you're thinking of wearing the Case all the time, you might want to remove it from your options.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Meter Bracket replacement
OEM Meter angle was bothering me, so I replaced it.
Functionally satisfactory, but a little disappointing because of the high price and sweet paint job.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Required when rear suspension is changed.
I installed this product to replace the rear suspension with Other Brand Product.
I was looking for a design that was as NORMAL as possible, and this product was it.
InstallationInstruction ManualThe manual is well written and anyone can install it.
View detail
Good!
I like it. Dream50 Rear mud guard. This is the best what i bought parts of dream50 ac15 cb50v products. My dreams come true by honda dream50 View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Not bad, but not as good as OEM.
I really wanted to add a Rear Carrier, so I bought this one from OEM replica.
I had high hopes for Shims' product.
It is used for touring immediately.
good point
●This is not Attachment, but a practical Carrier.
Plating finish is also beautiful.
Easy to install.
A bad point
The structure is delicate. I tied it tightly, but it collapsed.
The price difference is only about $1,000 from OEM.
I then bought the OEM one and the Pipe thickness is as different. This one was thinner.
After all, there is a considerable difference from the OEM Product.
But I think this product is Slim, Stylish and suitable for people who want to load it and use it as Attachment.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Installed on a 2020 Model 5 SR
When the Handlebar is changed to Separate handle, the height of the Meter becomes noticeable.
The installation of this product has alleviated the problem. Happy with the angle and the look.
If you want to use Normal meter, I think this is the product for you.
View detail
Fits: KAWASAKI W400, KAWASAKI W650
Cabton to Up, as usual.
I'm glad I bought it, it changed my W's Image completely.
The installation is OK without any problems as expected JAPAN
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Like SR.
I moved the Blinker to the Tail and lost the Reflector, so I relocated it. I bought a Nut that fits the size of the OEM Reflector at Home center and installed it because the diameter of the Nut did not fit. The bracket of the reflector is visible because it interferes with the mudguard, but I am very satisfied with the result. View detail
Fits: YAMAHA SR400, YAMAHA SR500
I think it's a great exhaust system!
I'm using it for the SR400Fi 2019MODEL
I was not satisfied with the sound volume and quality of sound like CUB with the OEM exhaust system, so I decided to buy this one Purchased
The result is Large Satisfaction
I used it for a while with Baffle, but I got used to the volume, so I took it off now It is
As others have reviewed
Not too loud, not too quiet I think it's just the right amount of volume so you don't get tired of listening to it for long periods of time
As you would expect when driving past 10pm in a residential area, etc That's not loud enough for this hour &hellip I think so … lol
It has been very well received by friends and family members who have been riding in the back
I was idling at an intersection and the driver of the Truck next to me That sounds great! I was complimented on that lol
Is the exhaust system from another company that I bought new before this one used? It was so dirty that you'd think
Torque was also skunked and disgusting, so the beauty of Shim's Craft is that it's a great idea It feels outstanding
We can confidently recommend this exhaust system
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Unique products that cannot be found anywhere else
The kind of product you'd have to be a big fan of to get your hands on
Even though it is called a carrier, it can only provide a very small space But if you have rain gear or CampingMatte, for example, you can strap it on
It is hard for the wrench to enter the large though it tightens at the base of the installation of the meter I'm at a loss as to how to tighten it up …
Also, it seems that a little time has passed since it was manufactured, and the surface of the Stainless Steel is a little cloudy But that's nothing if not polished
Overall, I'm glad I bought it
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
break down ((
Very high quality workmanship and beautiful detail. Installed, fixed, everything was fine. But after driving a thousand kilometers, I noticed some extra overtones from the exhaust. Inspection showed that the mount broke off, apparently from vibrations. It is a pity that such a high-quality part (in appearance) broke down after a week of use. Very high quality made, and beautiful detail. Installed, fixed, everything was fine. But having traveled a thousand kilometers, I noticed some extra sound from the exhaust side. Inspection showed that the mount broke off, apparently from vibrations. It is a pity that such a high-quality part (in appearance) broke during the week of use. translated by Google Translator View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Relocated for Side Back
I installed it on my SR400fi, and the OEM Blinker is in the way of the Side Back So I relocated it and installed a DAYTONA Small blinker
I saw some imprecisions struggling with the wiring, so I asked Large People Shop for help
I took it to the Reflector with a partial exposure, and then took it to the back of the Reflector & rarr; Fender back side The attached Wiring was not long enough, so I had it extended The attached Wiring Tube has been changed to Spiral Tube
I like the look and feel of the Refreshing
View detail