Reviews
Shipping is good.
It is only now possible to attach an external DialWire lock to the Handlebar.
I think what you want to do is reasonable.
However, we still would like to see some improvements due to the use of existing locks.
1.Dial is Smaller
I don't want to touch it in the winter or anything.
2.Wire is too long.
Handlebar position could be half as short as it is now.
3.Lock position
Not the other way around, as they tend to pop up on the Grip side and interfere with each other.
I dare to put it on the other way around.
It would be nice if this area could be improved, but it is regrettable.
View detail
Quite tense when pasting.
[How is it used?
Since the Tank and Seat are in close contact, the longer the ride, the more fine abrasions will appear on the Tank.
I bought this product to prevent that. 2 sizes, LargeSmall, 3 sheets in total, can be shaped with scissors.
How was your experience with it?
It is quite thin in thickness but seems to be resistant to abrasions. After making a paper pattern to make a similar shape to the contact surface, it can be cut along the pattern to make a shape that corresponds to the contact surface. However, while it is easy to cut, this Seat does not seem to be able to protect against sharp objects. Durability is hard to say at this point.
How did it compare to other products?
This is my first time using this type of product.
[Points to note]
I bought the one with luster and carefully applied it to a glossy tank, but it has a few air bubbles, and as noted in the notes, there are wrinkles where there are curved surfaces. It seems that you don't need to worry about it if the shape is simple.
View detail
It was too long for MONKEY.
It is convenient to attach it to carriers of various sizes, but it is too long for MONKEY carriers, so I have to cut the string.
Since they are expensive, it is better to make your own with UniversalParts.
View detail
What regulation of die length is hard to carry out is ITAI. A hook is excellent.
What regulation of die length is hard to carry out is ITAI.
A hook is excellent.
View detail
Fits: KAWASAKI Ninja1000, YAMAHA YZF-R25, HONDA XR250, KAWASAKI NINJA2 Helmet50 , HARLEY-DAVIDSON XL1200S, KAWASAKI Z1000, KTM 390 DUKE, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R1000R, YAMAHA MT-01, YAMAHA R25, Others
It's huge on the z1000!
I'm using the Shell Seat Bag SS.
I bought this one to increase the capacity.
It's too large for the Z1000's pointy Seat and it hammers it out.
The capacity is enough for my needs, but it's not cool to look at.
It doesn't come into play very often.
View detail
I don't have the original anymore, but...
I bought this product to bend, but I didn't know it was a steel product and couldn't bend it, so I ended up cutting and welding it.
I think it's a good thickness for Welding, but it's not good to buy for Small processing.
Absolutely no bending by hand.
The video shows the driving scene when passing the ETC Lane.
View detail
What do you base the length on?
I bought it with the hope that it would be easy to fix, but it is too long to use.
It has to be narrowed down to the smallest dimension of the Back, but it's so long that it looks like a motorcyclist's Rushing belt.
Think about it.
View detail
It needs to be processed from the beginning
Buckle or Adjuster for Seat Fixing with Belt is Instruction Because it has not arrived in the direction of the manual, first of all, we have to lose the Belt and put on the buckle It needs to be fixed
I wasn't sure how to evaluate it because I haven't used it yet, but I had to do this kind of work before I installed it I felt it would be a hassle not to be, so I'm writing to you 。 I trusted Tanax's products quite a bit, and the quality seems to be good if you can install them normally Very disappointing
View detail
Hard and fragile
I thought of Parenthesis as a toolbox, but the leather is too hard to open Hard …
After using it a few times, the plastic in the mounting area broke
View detail
high
The seat was hitting the tank [Color] The Clear paint is scraping off, so I decided to put it on
I tried to cut and paste it, but it's still going to be Wrinkle
But the price is high for just Seat
View detail
Only One Side
One Side of Single Order product If Single Item sells Color One Side as Color : GrayOut it and display it.
If Side case is Both Sides product, its Rain Cover will also be Quantity : 2pc. Sell ??it in Set group.
View detail
Fits: KAWASAKI Ninja1000, YAMAHA YZF-R25, HONDA XR250, KAWASAKI NINJA2 Helmet50 , HARLEY-DAVIDSON XL1200S, KAWASAKI Z1000, KTM 390 DUKE, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R1000R, YAMAHA MT-01, YAMAHA R25, Others
It got broken during installation
I bought it for the 2016 model ZX6R but it can not fix perfectly exactly.
Pulling to tighten Belt a little more, the plastic part of Buckle broke and broke.
I think that it is a disappointing though it is a thing with more than 10,000 yen.
I will never purchase again.
View detail
It is better to have Bracket and Springs Gold separately
With Rain Cover and smart Body with Cover attached, even a little rain does not really matter.
Because each string has a strap on it, it is safe to connect Carabiner etc and connect it to the car body.
It is a point of note when purchasing this product, but it is quite fatal.
First of all "Bracket" I think that it depends on the car type, but the worst key can not be removed, or it can not be pulled out. It is necessary to slightly raise the base position with Bracket.
"Spring seat gold" As for probably good people, I think that they probably noticed, but screws fastened to the base flew during high-speed driving. As expected as if I thought that it was fixed with Double nut! As I expected it was Cover installed on the car body I did not lose my smart, but it is a fatal problem.
As I noticed using it, it seems that inside the Cover, it is easy for heat to stay. There seems to be shut down.
View detail
To wrinkle
I was wrinkled again ~.
I purchased it a few times, I pasted it, but it will not go well.
That's too bad..
It is attached with a loose curved surface so as to pull somewhat,
I will become a little wrinkle by all means.
I hope Dryer can be used, but it can not be helped because it is incompatible.
I bought it cheaply at the time of Sale, so I regard it as good.
View detail
TANAX motofizz Off-road tank bag 3
OEMHigh seat installed We are using with WR 250X. I bought it because I thought that there was only a good Size to put in Wallet, Mobile, Cigarette.
If you try to attach it to a position that does not interfere with the Handlebar, it will be installed a bit behind. Therefore, Tank Bag slightly floats and does not Fit to Tank. Although there is no trouble at the moment, when viewed from the side, the gap with Tank becomes matter of concern, and there is discomfort when riding the former person.
The shape also opens to the side of the Handlebar with the opening and does not open Large when it is fully opened. Honest ease of use is bad.
I think that there is no choosing this if there are options other than this product. As Universal Product gives up feeling of Fit, I want at least the opening to be in front.
View detail
I screwed it out
I purchased Jupiter's for Vehicle 5-inches Car navigation system to mount it. I strongly tightened the Bolt that fixes the mount, and threaded the Bolt. Please also be careful not to overtight Bolt. View detail
Shape and functionality are good, but ...
While I got on the Motorcycle, I was able to handle various things with one hand was very good ....
I think that I am lacking confirmation, but I did not enter the touring mapple's Ring binding (Lol)
Touring mapple It is said that if you are like ordinary books you can say that it was OK. I did not understand with the Motorcycle beginner .... I was glad that it was written as a note somewhere that it does not correspond to Ring bookbin if I want it ....
View detail
not really
Purchased by being attracted to 10 Liter.
When I used it a couple of times, the engagement of Fastener got worse and I could open and close it from both, but only one could use it.
Also, because it can not be used widening so much, I think that 10 Liter can not be used. I purchased Backpack separately.
View detail
Artificail leather is thick and solid. Since a belt is also the same material, opening and closing is difficult. I wanted to have a mainstream one-touch metal fittings at least. Although a connection position can be adjusted and it is good, I wanted to hi
Artificail leather is thick and solid. Since a belt is also the same material, opening and closing is difficult. I wanted to have a mainstream one-touch metal fittings at least. Although a connection position can be adjusted and it is good, I wanted to hide the position full of holes by a leather. I wanted to have used the zipper stop instead of a string and to attach a key. It is also a demerit that I cannot carry around when it removes, since there is no handle in a bag. Only thick leather which shape does not collapse with budget prices is one star object. View detail
The power rope of JTC was used before (photograph right-hand side). Although the reinforcement of a rope is perfect, if it uses for years, it will surely be extended. Since the lock function of the clinch was attached the rope of JTC to the end ho
The power rope of JTC was used before (photograph right-hand side).
Although the reinforcement of a rope is perfect, if it uses for years, it will surely be extended.
Since the lock function of the clinch was attached the rope of JTC to the end hook, even if it was extended, several favorite time attached it and it had the hook attached to a favorite location by the loading platform.
It seems that this carrying cord must twist the part and cord which were extended when extended.
Although it is what to replace when being extended to some extent, since the price is cheap well ...
View detail