Reviews
Movable flap with sucking disc to secure the well
Purchased for my phone.
The good thing about the Suction Cup
My motorcycle is a steel plating tank, so I was looking for a suction cup type because of the risk of damage with a magnet.
The suction cup at the bottom of the center of the bag is not usable because it is attached to the tank belt, and it is unnecessary.
And the Flap of Both Sides was Firmly and strongly attached with the two Suction Cups (standard position) in parallel with the Tank belt.
Less Risk of Wound worn in Suction Cup
Suction Cup position can be freely moved for easy installation
Suction Cup Repair Parts from TANAX are readily available even if the cup deteriorates.
● The feel is fine if you only use the phone.
The latest large smartphones can also afford it, [Color] Touch screen from the clear surface is also available, but it is difficult to operate in detail.
Also, if the phone is covered with a Glass-type protective Seat, the Touch response will be poor.
Bag can be mounted either horizontally or vertically
Easy to attach and detach the bag with just a hinel.
When placing it horizontally, the handlebar should be placed a little to the rear because it will hit the bag if the handlebar is fully extended.
When I installed the bag vertically, the handlebar did not interfere with the bag when the center of the bag was placed over the fueling port.
In any case, you have to lower your eyes to look at the smartphone screen while navigating, so you have to be careful when moving forward.
Smartphone holders can cause camera failure due to direct vibration to the smartphone, but this backer suppresses vibration, so there is less risk of failure.
I think the smartphone thermal runaway Risk will be higher in the summer, so please be careful!
View detail
It was the right purchase.
I have been using a SeatBack of about 4L from another company, but it was too small for my wallet and cell phone... I carefully examined the products this season. The K-SYSTEM BELT is easy to use and has a satisfactory load capacity. It is a good SeatBack for day-trip touring. View detail
Seat bag
Enough for a day or two's worth of luggage, Design and Size are just right. View detail
Available for yzf-r25
It could be used for yzf-r25.
I am planning an overnight touring trip and my normal Seat bag will not be able to handle it, so I purchased this product.
If I wanted to buy a large seat bag, it would cost about 10,000 yen, but I felt that I would not use it that often, so I put my Rucksack on the Tandem seat and hook the Belt to the Hook here to hold it in place.
Although a fixed belt must be purchased separately, it is cheaper than buying a large Seat bag!
It is also recommended for occasional overnight Touring with SS, as it is hardly noticeable!
View detail
Fits: HONDA ADV150, HONDA CBR250RR, KAWASAKI Z650, KTM 390DUKE, SUZUKI KATANA, YAMAHA MT-03, Others
Side bag with a shape that matches the car body
This side bag is shaped to fit the CB400T11 perfectly, and has a good matching as if it were an Exclusive Design.
The back body is Nylon, so I think it is classified as a soft case.
It is lightweight and easy to attach and remove via the Nylon band attachment to the Seat. I think the capacity is also large enough. I bought this for an overnight touring trip.
The bag is also equipped with a thin inner back like Eco Bags, so by putting things inside the inner back, the bag can be protected from water to some extent. Small items stored inside tend to be scattered, but this may be unavoidable with side bags, not limited to this product.
When opening and closing the fastener, whether due to insufficient rigidity of the fastener part or due to its shape, smooth opening and closing is sometimes not possible.
View detail
Trust Brand
Yamaha Bolt, purchased for securing luggage on Rear Carrier.
KIJIMABackRailQuantity:Pair (for Left and Right) This touring net is being used by hooking it up to the
Thanks to KIJIMA BackRail, Net does not interfere with Rear Fender.
I was concerned about the 100-unit Net, so I purchased a trustworthy BrandTANAX product.
I have just started using it and it holds my luggage firmly in place and looks like it will last a long time.
View detail
Great for OFF cars. Versatile.
About 3 candidates to install on WR250X
Off-road tank bag3:This seems to be a popular item often seen on off-road vehicle blogs.
However, all of my Touring mapples are R versions.
Map does not go in.
Size-wise, 4.5L is not enough.
I am not a big fan of the Map inlet/outlet spec. either.
RALLY50Tank Bag:This is an off-for-vehicle version of the multi-system tank bag we have been using.
Touring mappleR version will also be included.
Quantity:Pair (for Left and Right) and Pocket on the front side.
Variable capacity from 13L to 21L.
The shape and spec. are similar to multi-system tank bag,
It is expected to be as easy to use as it has been in the past.
LandCROSSTank Bag:Compatible with Touring mappleR version.
Quantity:Pair (for Left and Right) A pocket with a large overhang on the top (can hold a 500ml plastic bottle).
Movable Smartphone Case in the front pocket.
SizeCapacity:17L
In terms of shape, it is my favorite.
I was going to use a LandCROSSTank Bag, but after doing some research on it originally designed for BigOffLoader, it seems that it has a distinctive Quantity:Pair (for Left and Right) The RALLY50 Tank Bag was purchased because of the possibility of interference with the 250cc class when the handlebar is turned all the way down.
The back side is fixed by Belt.
When it is removed, the Buckle portion of the tip is inserted into the gap between the Seat and the Belt is attached with Magic tape.
The front side cannot be fixed by Magnet because it has been changed to IMSBig tank.
Therefore, we modified the excess belt from the TANAX bag we had been using in the past so that it could be fixed in place.
On the front side, four Suction Cups are attached, but they do not stick to the surface of the IMSBig tank because the resin molding itself is not smooth.
Once all four Suction Cups were removed, the Buckle was installed along with the Suction Cups.
(Cut the Belt of the Buckle part, drill a hole in the Belt part, and fix it together with the Suction Cup fixture.)
The front side can now be fixed to the belt without modifying the large size.
It is just the right size in terms of large.
When refueling, turn the front Buckle to Quantity:Pair (for Left and Right) Remove and cause the Tank Bag to move toward the front.
There is no hassle of securing it to the Carrier with Net for small purchases and such, just open the Bag and throw it in.
Since it is fixed at four points, it will not shift even with slightly heavy objects.
You can also change the size capacity, so you can buy souvenirs that you gave up on at your touring destination.
The only thing is that there are so many ZipTags that until you get used to using them, you won't know which one is which....
https://mystxl1200.com/archives/1454
View detail
buying a replacement
I used to use a Type that was fixed with Rubber, but it was difficult to use, so I had to replace it. It is a little too large for a day trip, but it is easy to use. If I may say so, I would like to have only one drink holder, and I would like to have a wider opening to take out the main pocket, and I have to remove the buckle of the SIDE strap every time I open the SIDE pocket, so Minus ★1. View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Not too Large, not too Small
Since the capacity of a shell-type SeatBack is small, we searched for a SeatBackSingle Body that has a reasonable capacity without relying on a Side Back.
Since the tandem seats of modern motorcycles are fashionable, a large-sized touring back would be unstable while riding, so I think this size is just right.
Since this is a new SeatBack, the XBelt has been improved. In the previous model, the XBelt was fixed only with an X shape, but now there is a Belt for fixing the pedestal and an XBelt for fixing the Back. It is good to see progress and ingenuity.
The back itself is a stable Mr. Tanax, with Inner Frame and various Pockets, and is sophisticated and easy to use.
View detail
Quite tense when pasting.
[How is it used?
Since the Tank and Seat are in close contact, the longer the ride, the more fine abrasions will appear on the Tank.
I bought this product to prevent that. 2 sizes, LargeSmall, 3 sheets in total, can be shaped with scissors.
How was your experience with it?
It is quite thin in thickness but seems to be resistant to abrasions. After making a paper pattern to make a similar shape to the contact surface, it can be cut along the pattern to make a shape that corresponds to the contact surface. However, while it is easy to cut, this Seat does not seem to be able to protect against sharp objects. Durability is hard to say at this point.
How did it compare to other products?
This is my first time using this type of product.
[Points to note]
I bought the one with luster and carefully applied it to a glossy tank, but it has a few air bubbles, and as noted in the notes, there are wrinkles where there are curved surfaces. It seems that you don't need to worry about it if the shape is simple.
View detail
It is convenient to increase the Size.
It fits Small Rear Sets and is convenient to increase the capacity. View detail
Difficult to install
It may be due to the Material, but no matter how much Tension is applied, it slips.
Included Parts:is not enough to hold it in place, so I use a rushing belt to hold it in place, but it still slides around.
On the Seat, it becomes unstable and theQuantity:Pair (for Left and Right) Balance tends to collapse.
If you don't apply a lot of Tension with Belt, it is likely to fall off.
I then bought and installed Carrier to stabilize it, but this time it slid all over the place.
When I consulted with Manufacturer, the answer was as if to say that it was because they were trying to fix it to Carrier, and if you don't like it, don't use it.
I have used a variety of TANA-X products, but I did not expect such a User-ignorant Manufacturer.
I clearly do not recommend it.
If you are considering for touring campingetc., it is better to use another manufacturer's bag.
View detail
Fits: HONDA CB1300SB, KAWASAKI Ninja1000, HONDA CB400SB, HONDA CB650R, HONDA CBR250RR, YAMAHA XJR1300, YAMAHA Tracer900, Others
Sufficient capacity for overnight touring
[How is it used?
Used for touring, can a man stay 1-2 nights? (except winter season)
Was the one you received as per Image?
The texture is good, and the Silver color of the Shell also shows the Hairline finish like the surface treatment of Aluminum material.
How was your experience with it?
Effective enough to bulk up capacity
[Points to note]
Belt for fixing the seat is long, and the excess part needs to be removed after installation.
How did it compare to other products?
The product in question was matched to the Seat shape.
Point of installation and hang:
Easy to install
Items that should be purchased together:
Optional parts to handle extra belts (directions are marked)
Opinions and requests to the manufacturer:
If there is a Velcro or similar on the end of the Belt, it would be possible to fix the excess Belt that would be bloated after installation (it would be dangerous if the Seat is thin on the model/vehicle as it could wrap around the rear wheel).
View detail
Easier to use than Backpack or Backpack
[How is it used?
A few hours to a day touring
Was the one you received as per Image?
Generally. A little disappointed that the waistband is too long and too much is left over.
How was your experience with it?
It holds a Long Wallet, Coin Purse, Disc Lock, and my phone, and is useful when I go out for a short trip. I don't feel any weight or hassle while riding.
[Points to note]
The waist strap is too long. Even a sumo wrestler could wear it.
As mentioned in the description, there is no waterproof performance.
How did it compare to other products?
This is the only leg bag I have, but I think it is easier to use than the Fanny pack while riding the Motorcycle.
View detail
Useful.
I am using it as an additional fixture for Bag and it is very useful. View detail
Comes in handy when you have extra luggage!
I don't often use it with Touring netSingle Body, but with NINJA1000, M size is too tight, but it can carry something like a box of Sneakers.
I mainly use Seat bag + Touring net (M). When I have a little less luggage, I use a sub-hook to adjust the load.
I carry it in the drink holder of my Seat bag.
I left it in there, so when I thought it would be there and my luggage grew, I cried when it wasn't there. (Laughs)
View detail
OEMOption?
[How is it used?
I bought this for long distance touring.
Was the one you received as per Image?
The Right Side has a good distance from the Muffler silencer and does not receive any heat damage from the silencer.
How was your experience with it?
Quantity of Tail cowl:Pair (for Left and Right) The overhang of the bag and the concavity of the inside of the bag match each other perfectly, making it look like an OEM option. The bag looks good when installed on the vehicle, but the inner volume of the bag could have been a little larger. However, when the bag is covered with the waterproof cover, it is inconvenient to put something on the top of the bag to secure it. It will not be flooded in a little rain, but in a heavy rain, it is not good.
[Points to note]
In the case of FZS600, use the fixing buckle attached to the back of the Bag for the Quantity:Pair (for Left and Right) The bag on the rear side was not used because the Tire would wrap around the Belt when the Rear suspension was in full stroke. Even without using the rear buckle, there was no problem in practical use. The front buckle was fixed by connecting it to the Belt wrapped around the Bracket of the Tandem Footpeg. In this condition, there was no problem in highway driving.
How did it compare to other products?
We compared among TANAX products with good cost performance, and found MFK-135 to have the best cost performance.
Other items that would be helpful
Installation point or hang:Install so that the rear wheels do not catch the belts.
View detail
License Plate is not bent
I bought this because when I put a Cover on my motorcycle, it hits the License Plate and bends. I was worried about the large load on the screws because they are plastic, so I applied Screw Lock to the screws to prevent them from falling off.
It also looks good.
View detail
Fits: KAWASAKI NINJA 400, YAMAHA YZF-R7, DUCATI STREETFIGHTER V4, YAMAHA MT-03, Others
Recommendation for SS vehicles
I installed it on my S1000RR, but you can recommend it to your vehicle EXACTLY.
I think the Belt is a little long to make it universal…I'm screwing it under the Back.
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
watchman
Standard side bag
Basically, it can be installed on any type of car, but I think it is better to have a side stay.
A simple waterproof bag is included, but since the soft PolyethyleneCase (inside) from Muji is a CinderellaFit, it is easier to use and recommendation to buy this one.
View detail