Reviews
Tank capacity is low.
crf250l and CT110 HUNTER CUB
Purchased to store 900cc portable cans that I bought to prevent running out of gas during long tours.
I JUST love the Size of the portable can when I put it in.
View detail
The cosmetics, appearance and use are Exactly for me.
[How is it used?
It is installed on a Motorcycle for Street Nori/Touring and stores the Chain lock when parking the bike.
Was the one you received as per Image?
It is cute, just like the Image.
Since many of the impressions were related to the installation Belt, we were able to Image the Material.
Since this product is offered at a low price, I chose this product with the feeling of enjoying Arrangement by myself. The appearance and installation feeling of the product was just like Image.
How was your experience with it?
Many people say they are worried about the attached Belt alone, but in my case, the attached Belt alone has been stable so far.Belt is wrapped twice around the stay of the MotorcycleBody, and the Quantity of the Belt threaded inside the Bag:Pair (for Left and Right) is tied up. This is all. (Photo attached)
The only thing I thought after using it is that opening and closing the bag is a bit of a hassle…. I thought, "Oh, I should have chosen the one that is easy to open even if it is a little expensive…".
[Points to note]
Depending on the mounting position, it may be difficult to stabilize with only the supplied mounting Belt.
How did it compare to other products?
I think it's the best in terms of look cuteness and cost performance.
▼Point of other installations and hang
If the installation is obviously insecure, reinforcement should be considered.
I only drive down the road, and since I install it in a place where I can see it in front of me, I only use the attached mounting belt to secure it. However, when driving long distances at high speeds, I think it is a good idea to take safety and security measures first, taking various situations into consideration.
▼Items you may want to purchase together
If the Bag is to be installed in a location where there is nothing to support the bottom of the Bag, it may be necessary to consider purchasing a separate Stay.
Opinions and Requests to the ▼Manufacturer
I think the manufacturer is trying to make the product large and sturdy, but it would be nice to have a more detailed explanation of how to use the product so that the intention can be conveyed. I think it would be good if there were more detailed explanations on how to use the product or something to convey the intention of the manufacturer. For example, a video feed would be nice.
View detail
For a small Accessory Case
It is mostly for dress-up purposes, but it will be useful as an accessory case for tools and other small things. (The contents are still empty...)
Waterproof property is not considered to be very good. I don't ride in the rain, so it's not a problem.
I am satisfied because it is somewhat cool.
Installation was a little loose with the supplied Band, so I reinforced it with Tie Band.
View detail
installation device
It is installed on a GB250 CLUBMAN.
I wanted to install the Tool Bag on the Right Side, but it would have gone into the Tire Side if I installed it as is, so I purchased an appropriate Stay at Home center and installed it.
GB250 CLUBMAN has a Tool Box, which is used for on-board tools, and the Tool Bag contains a Vinyl jacket, Touring net, spare Plug, and spare CDI in case of sudden rain. It is very useful for GB250 CLUBMAN which has no on-board tools.
View detail
Installed to increase packing capacity when camping
Quantity in Capacity Up when Camping touring.:Pair (for Left and Right) attached to the
I am using it conveniently to store Motorcycle Cover, Peg, For side stand board, etc.
Unlike genuine leather, it is resistant to rain and dirt and can be used roughly.
View detail
Large is just right.
Puncture Repair Kit, tools and Dustcloth are included.
Mountings are Pillion Bar and SIDEGuard. It is.
View detail
well-built
Used for Eliminator
It's thick and sturdy, and I've used it for about two years out of four, but it's only slightly faded.
Initially, I wore it under Light, but I moved it to Rear side considering the heat of Light and wore it.
I like the Style and use it.
View detail
Accessory CaseSide Back, not Tool bag
It's just the right size for everyday use.
It can hold about 500ml Plastic bottle, Towel and Wallet.
It's a bit cumbersome to open and close, and the fixed band comes loose when you rummage around, but I'm satisfied with the solid construction.
View detail
Convenient and Cool Storage Case
YAMAHA_VIRAGO250 but it's a motorcycle with no storage capacity
To hold spare brake lever, clutch lever and needle gold
Purchased
I've found less expensive ones in stores and on the Net
I saw other people's imprecisions and thought”I like this”and
I made a chase purchase
It was a good product that didn't lose its shape when I tried it out
View detail
Hard and fragile
I thought of Parenthesis as a toolbox, but the leather is too hard to open Hard …
After using it a few times, the plastic in the mounting area broke
View detail
Back is the best Cospa
BackBody, texture - capacity - I think that COSPA looks pretty expensive. I'm putting onboard tools and Rain Wear. But the problem is mounting Belt! Just put a bit of heavy things, it seems to be loose when running, I am afraid. I fixed the Sissy bar so that I could afford to Belt whom I had troubled with the installation location, and joined the Belt in inside. If it does not improve within that, it may not be good. View detail
Ideal for Accessory Case!
I bought to put Bike Cover out.
Quality is also very well very satisfied than I thought.
It is a very recommendation because it comes in as normal as a thin Cover or Rain jacket!
View detail
I tried to attach another one
I installed only One Side the other day, but the capacity is still 3. 5 L is not enough.
I bought another one again.
But One Side had a bit of a hard time, but when I become one more, I will do everything once from Rose Case.
Although it took a hard time by trial and error it took more than 2 hours but I could install it.
I wrote Impre the other day so I will write it as a little helpful.
The method
1. First I did not use Band from the beginning, I used the Band I purchased the other day.
2. Thread the Band through the hole through the Tool Box.
3. Band dunk below Tandem seat and put it through the hole of the Tool Box again (Second time) Fix it
4. In my case I was a little long as it was a long time (2m) I think that it is a little short
5. Lastly, since the Tool Box hits Rear Fender, I protected it so that it will not be hurt by Cushion.
I think that it is impossible to move a little by force, so I tried installing it so that it can move slightly.
View detail
Bag itself is exactly good
I purchased this American Type Motorcycle for the first time.
I had it until now (PCX) Rear trunk was not attached and it was troubled without any loading ability
I do not want to attach too much Side bag, I found this item that I am looking for and can also use this Tool Bag & Side bag and bought it.
Just did not install Band and I searched for installation Band, somehow managed to install today.
Easy to Implease
1. First of all, it is 3. The capacity is 5 L and Small, but if it is a Small one (Rain gear etc) It is enough to enter.
2. Bagle (Stopper gold tool is) Although it can be tightened tightly, although it takes some trouble to take out
3. To install, tighten the commercially available tightening band through the bottom of the Tandem seat.
It was surprisingly securely attached.
4. Although the upper part is certain but the lower part I want to see how the parts still remain because there is little movement at the moment
Although it is simple more than that, I told you the feeling that I installed, but I put rain gear and gloves when I stopped for the time being.
After that I do not know how it feels like rainy day, so I think I will make Cover.
View detail
It looks good
It looks nice, but you should not expect storage. It is easy to install, but it is Minus evaluation that it makes it da RAN without fixing it. However, Parenthesis is good. View detail
Just right Size
It is named Tool Bag but I purchased it for use as ETC Body + α's Accessory Case, installed in the Grab Bar.
Although loading capacity and Large Kimono are as you see, they do not get in the way and I do not have a presence like Side bag, so I think that it is just right for everyday use.
The price is also reasonable, thick and sewing is also solid, and even as a tool holder, COSPA is enough.
I just bought it and it was hard to open and close, but I wonder if it will become familiar within that?
Because of Separate handle, there are few Attachment attachment areas around Handlebar, I was worried about the installation position of USB charging port, but I'm thinking of putting it here.
Whether the Band fixation is not relaxed by vibration or not is checked but as with others it is fixed with Tie Wrap anything.
View detail
Smaller than expected
3. It's 5L capacity, but I still do not leave the Tool Bag area
Rain gear is about to enter Limit
However, considering the price can be said to be good products
There is not much insistence on appearance, Parenthesis is good
View detail
Satisfied with solid making
I wanted a Tool Bag and studied variously, I tried to purchase because I was able to convince most of the contents of Impre and the price most.
I installed it in the Sissy bar instead of Front fork, Large is not too big Large It's too small It looks just good.
Since there is a Side bag, Tool Bag wears fashion sensibly rather than practicality, VIRAGO thinks that it is recommended to install various Bags in order to produce a sense of volume since the body is small.
This time I attached it to the Sissy bar but due to the shape of the bar I used Belt and Tie Wrap because I could not tightly tighten it with the attached Belt.
With this I stayed Firmly so it does not seem to be moving.
I also have a solid foundation and the price is not that expensive so I think it is reasonable, Orange's Stitch is also a good Accent.
View detail
Is it easy to loosen? - - -
I installed it on Front fender.
Installation Belt tightly caught
It seems easy to loosen so reinforcement may be necessary.
I'm updating again because I have not run since installing it yet.
View detail
APE 50 attached to FI type D
APE's Front fender is installed after it is down. I purchased Rain jacket and I wanted to insert a tool. I thought that it was good to purchase because the texture of Bag was also good and Large Kimono was just right. We will Recommendation! View detail