Reviews
Tank capacity is low.
crf250l and CT110 HUNTER CUB
Purchased to store 900cc portable cans that I bought to prevent running out of gas during long tours.
I JUST love the Size of the portable can when I put it in.
View detail
For a small Accessory Case
It is mostly for dress-up purposes, but it will be useful as an accessory case for tools and other small things. (The contents are still empty...)
Waterproof property is not considered to be very good. I don't ride in the rain, so it's not a problem.
I am satisfied because it is somewhat cool.
Installation was a little loose with the supplied Band, so I reinforced it with Tie Band.
View detail
installation device
It is installed on a GB250 CLUBMAN.
I wanted to install the Tool Bag on the Right Side, but it would have gone into the Tire Side if I installed it as is, so I purchased an appropriate Stay at Home center and installed it.
GB250 CLUBMAN has a Tool Box, which is used for on-board tools, and the Tool Bag contains a Vinyl jacket, Touring net, spare Plug, and spare CDI in case of sudden rain. It is very useful for GB250 CLUBMAN which has no on-board tools.
View detail
Large is just right.
Puncture Repair Kit, tools and Dustcloth are included.
Mountings are Pillion Bar and SIDEGuard. It is.
View detail
well-built
Used for Eliminator
It's thick and sturdy, and I've used it for about two years out of four, but it's only slightly faded.
Initially, I wore it under Light, but I moved it to Rear side considering the heat of Light and wore it.
I like the Style and use it.
View detail
Accessory CaseSide Back, not Tool bag
It's just the right size for everyday use.
It can hold about 500ml Plastic bottle, Towel and Wallet.
It's a bit cumbersome to open and close, and the fixed band comes loose when you rummage around, but I'm satisfied with the solid construction.
View detail
Convenient and Cool Storage Case
YAMAHA_VIRAGO250 but it's a motorcycle with no storage capacity
To hold spare brake lever, clutch lever and needle gold
Purchased
I've found less expensive ones in stores and on the Net
I saw other people's imprecisions and thought”I like this”and
I made a chase purchase
It was a good product that didn't lose its shape when I tried it out
View detail
I tried to attach another one
I installed only One Side the other day, but the capacity is still 3. 5 L is not enough.
I bought another one again.
But One Side had a bit of a hard time, but when I become one more, I will do everything once from Rose Case.
Although it took a hard time by trial and error it took more than 2 hours but I could install it.
I wrote Impre the other day so I will write it as a little helpful.
The method
1. First I did not use Band from the beginning, I used the Band I purchased the other day.
2. Thread the Band through the hole through the Tool Box.
3. Band dunk below Tandem seat and put it through the hole of the Tool Box again (Second time) Fix it
4. In my case I was a little long as it was a long time (2m) I think that it is a little short
5. Lastly, since the Tool Box hits Rear Fender, I protected it so that it will not be hurt by Cushion.
I think that it is impossible to move a little by force, so I tried installing it so that it can move slightly.
View detail
Bag itself is exactly good
I purchased this American Type Motorcycle for the first time.
I had it until now (PCX) Rear trunk was not attached and it was troubled without any loading ability
I do not want to attach too much Side bag, I found this item that I am looking for and can also use this Tool Bag & Side bag and bought it.
Just did not install Band and I searched for installation Band, somehow managed to install today.
Easy to Implease
1. First of all, it is 3. The capacity is 5 L and Small, but if it is a Small one (Rain gear etc) It is enough to enter.
2. Bagle (Stopper gold tool is) Although it can be tightened tightly, although it takes some trouble to take out
3. To install, tighten the commercially available tightening band through the bottom of the Tandem seat.
It was surprisingly securely attached.
4. Although the upper part is certain but the lower part I want to see how the parts still remain because there is little movement at the moment
Although it is simple more than that, I told you the feeling that I installed, but I put rain gear and gloves when I stopped for the time being.
After that I do not know how it feels like rainy day, so I think I will make Cover.
View detail
It looks good
It looks nice, but you should not expect storage. It is easy to install, but it is Minus evaluation that it makes it da RAN without fixing it. However, Parenthesis is good. View detail
Smaller than expected
3. It's 5L capacity, but I still do not leave the Tool Bag area
Rain gear is about to enter Limit
However, considering the price can be said to be good products
There is not much insistence on appearance, Parenthesis is good
View detail
To Swingarm.
BOLT Shoulder Bag's body Left Side was lonely so I tried installing it on Left SideSwingarm. In the attached Band, the tightening is loose and it is dangerous that it falls under the BeltGuard on the lower side, so between the BagBody and Swingarm, cut a 2 mm thick Rubber board to the appropriate Large size and paste it with Double - sided Tape and Tie Wrap 4 I tightened it tightly and fixed it.
While instant Puncture repair agent is put in it, it shakes up and down with vibration during running so that the BagCenter part was shrunk with a thin Belt of 100 yen uniform, became a shake.
Originally it is not a thing to install in such a place, but I am satisfied personally.
View detail
Well it is cheap!
I am satisfied with a firm Material that is reasonable for the price. Installation Belt can also be used vertically and horizontally, so it was easy to install! Storage is double-end Wrench 10 Phillips Screwdriver Slotted screwdriver MONKEY Insulated Tape Pliers I just entered this. If it is too much, it tends to be downward with weight.
View detail
Tanax Moto fizzTANAX motofizz United States
I installed it as SR400 Rear bag.
Gold Amount, shape is satisfactory. I attach it with 2 points by Belt, but SR is attached as Tie Wrap is added as insurance because the vibration is Large..
I use it as a spare plug and tool requirement.
View detail
Since there was no place which stores the disk lock of vehicles, it attached to 250TR. It seems to be OK even if it puts in a heavy thing somewhat by firm structure than expected. A price is also comparatively cheap, and since it can be used so mu
Since there was no place which stores the disk lock of vehicles, it attached to 250TR.
It seems to be OK even if it puts in a heavy thing somewhat by firm structure than expected.
A price is also comparatively cheap, and since it can be used so much without using mind, it is satisfied.
View detail
The tool roll and the working-level month glove are put in. A handy price may be sufficient. Although he has no saying if MACHI is large to a slight degree.
The tool roll and the working-level month glove are put in.
A handy price may be sufficient.
Although he has no saying if MACHI is large to a slight degree.
View detail