Reviews
To Swingarm.
BOLT Shoulder Bag's body Left Side was lonely so I tried installing it on Left SideSwingarm. In the attached Band, the tightening is loose and it is dangerous that it falls under the BeltGuard on the lower side, so between the BagBody and Swingarm, cut a 2 mm thick Rubber board to the appropriate Large size and paste it with Double - sided Tape and Tie Wrap 4 I tightened it tightly and fixed it.
While instant Puncture repair agent is put in it, it shakes up and down with vibration during running so that the BagCenter part was shrunk with a thin Belt of 100 yen uniform, became a shake.
Originally it is not a thing to install in such a place, but I am satisfied personally.
View detail
Quite a capacity.
I installed it in Made by HURRICANE Backrest of BOLT Shoulder Bag.
Installation of Pad of Backrest Since Belt attached to the Bracket part seems unreliable, we did not use it and it was just fixed with a good feeling with 5 mm wide Tie Wrap.
As a Tool Bag, there is a space that is big enough to accommodate Small objects such as Touring mapple and Gloves and Size as much capacity. If only Mapple is thick, will 5 or 6 volumes enter?.
It seems to be durable to make with this size, so the price is also affordable so I'd recommend it to those looking for Large eyes Tool Bag.
View detail
Somewhat contrivance is necessary for fixing method
Although the attachment method to the car body uses the attached Strap, it may be a bit difficult to fasten firmly and fix it firmly only with Strap. I fixed it with Tie Wrap.
If the opening and closing of the lid is One Touch Buckle, it will be more comfortable for everyday use but I think that it is a fixed gold tool which also doubles as design, so I think this is fine.
The overall design also matches SR well.
View detail
Well it is cheap!
I am satisfied with a firm Material that is reasonable for the price. Installation Belt can also be used vertically and horizontally, so it was easy to install! Storage is double-end Wrench 10 Phillips Screwdriver Slotted screwdriver MONKEY Insulated Tape Pliers I just entered this. If it is too much, it tends to be downward with weight.
View detail
Tanax Moto fizzTANAX motofizz United States
I installed it as SR400 Rear bag.
Gold Amount, shape is satisfactory. I attach it with 2 points by Belt, but SR is attached as Tie Wrap is added as insurance because the vibration is Large..
I use it as a spare plug and tool requirement.
View detail
When the Chain lock was settled, he thought that it was kind, but it was impossible truly. Since there was neither an in-vehicle tool nor a Space in the APE, it will be occupied by the tool in the inside of a Bag and I was troubled.
When the Chain lock was settled, he thought that it was kind, but it was impossible truly.
Since there was neither an in-vehicle tool nor a Space in the
APE, it will be occupied by the tool in the inside of a Bag and I was troubled.
Since he did not want to break down the
Style, it inquired towards attaching neither a Carrier nor a VOX, and this Tool
Bag was found in the place which also considered attaching the pure Toolbox for FTR or the
MONKEYs.
Although a certain amount of tools, such as the
Driver and a Spanner, are settled, if even a 500-mm Plastic bottle
is put in, I will feel that nothing is put into others.
Even if too large, since it is troubled, a complaint is not in a Size, but it is the
question at the notation with a capacity of 2 liters.
View detail
When riding on an old Motorcycle, he wanted to reserve a tool and it was purchased. OK for the moment, although worried about whether the Belt of attachment loosens. Although put into the hezagonal wrench a Spanner, a Driver, and briefly,
When riding on an old Motorcycle, he wanted to reserve a tool and it was purchased.
OK for the moment, although worried about whether the Belt of
attachment loosens.
Although put into the
hezagonal wrench a Spanner, a Driver, and briefly, it is still generous.
Although it can be used also as a
accessory case, since opening and closing is troublesome, I think the optimal kana, although the thing which is not so frequently-used is put in.
Since it is the structure in which the
price became brave comparatively, I would like to continue to use regularly.
View detail
Since there was no place which stores the disk lock of vehicles, it attached to 250TR. It seems to be OK even if it puts in a heavy thing somewhat by firm structure than expected. A price is also comparatively cheap, and since it can be used so mu
Since there was no place which stores the disk lock of vehicles, it attached to 250TR.
It seems to be OK even if it puts in a heavy thing somewhat by firm structure than expected.
A price is also comparatively cheap, and since it can be used so much without using mind, it is satisfied.
View detail
The tool roll and the working-level month glove are put in. A handy price may be sufficient. Although he has no saying if MACHI is large to a slight degree.
The tool roll and the working-level month glove are put in.
A handy price may be sufficient.
Although he has no saying if MACHI is large to a slight degree.
View detail
Since there was almost no storage space in SR, it purchased, although a tool etc. are paid. A mounting arrangement is also flexible, and since waterproofness is also solid, it is found useful. Since the thick firm raw material is used, there is al
Since there was almost no storage space in SR, it purchased, although a tool etc. are paid.
A mounting arrangement is also flexible, and since waterproofness is also solid, it is found useful.
Since the thick firm raw material is used, there is also neither die collapse nor a color fade-out, and it is satisfied.
View detail