Reviews
It looks good
Mounting ScrewQuantity clamping Number:Just remove the 2pc.
Therefore, 15 to 20 minutes of your time is all that is needed.
I chose Black because the surroundings are Black, but it is not noticeable.
There is a sense of unity.
The seat shape inevitably gapes in the front.
This position was where we wanted it.
This time, when I opened the box, I found the Package in the upper part of the box.
It was off. It was open.
I was disappointed thinking it was a return product. I also inspected the product when it was shipped.
I wonder how they are doing.
The product was fine, but...
View detail
Loader Hook
The usability and texture were also good. View detail
Items needed to secure a bag to a sports type motorbike
Fewer and fewer modern motorcycles have loader hooks. (There may be a hole in the front side for fixing the belt behind the tandem footpeg, but in many cases there is no place to fix the belt in the rear side.
This Plate hook makes it easy and convenient to secure the Belt. It looks inconspicuous, so there is no problem even if you leave it attached.
View detail
Stable loading
[How is it used?
I wanted to carry a large luggage for a long distance touring, so I chose this one to be stable and secure.
Was the one you received as per Image?
Image is as is.
Was the installation difficult?
It is easy to use, as it is only co-tightened to the License Plate.
How was your experience with it?
There are more physical places to hook up, so fixing can be done easily and reliably.
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
The quality of the product was also good.
Other items that would be helpful
Installation Point or hang
It may not be possible to assemble if the Bolt has already been assembled to Bolt or if the Number Bolt is too short.
View detail
Also helps prevent deformation of the License Plate
I purchased Repeat following MT−09. I installed it for a hard-bound Hook when I have a little luggage on the road. It also helps to prevent deformation of the License Plate. I would be happy if the price is a little lower...so I gave it a Cost performance of 3. View detail
License Plate Protection
When I remove the seat on a weekend ride, the seat gets caught on the license plate quite a bit. "Won't you bend the License Plate someday?" I was wondering.
I installed the License Plate with confidence because there is an Instruction Manual with Large and strong though the regulation became severe recently.
Body is Quantity:Pair (for Left and Right) There was a place to hook up the Hook to, but I don't plan to use it. "Well, it might come in handy for something." and I think it's part of Design.
It seems to be strong with a thick plate, and installation is also easy by removing the screw of the license plate once and tightening it together.
Recommendation to License Plate protection.
View detail
It's strong, solid and easy to use. But depending on the Motorcycle…
The Plate is thick and I thought it would not bend even if I hooked the Touring net or Belt.
I think that even a beginner can do it with only one Driver because the installation is only to remove the License Plate and to put it between the Mounting Base.
However, since the license plate is attached with Bolt and Nut, it may be difficult to install depending on the car model because the Nut may be in a position where you can't put your fingers (mine was exactly like that).
I used it for Touring immediately, and Seat bag was fixed firmly, and it was quite good.
However, on my Motorcycle, the License Plate is attached to the Swing Arm, so even if I fix it Firmly, the suspension sinks when I sit down, so it looks a bit loose. I don't have any problems with riding, and I don't have to worry too much about the seat bag shifting, but I thought I'd write this to help others who have the same problem.
View detail
Maybe we should also get Bolt?
I'm very happy with it, but the Bolt that came with it was too short to stop when I put it on, so I had to stop it.
Just tuck it in! I'm a little disappointed because it said something like….
And when I finished and looked at it from the front, it was close to one side. (Lol)
Put it back on again.
I should have done it when there was daylight.
When I looked at other reviews later, it said that Bolt was still short.
As for the important product, the License Plate has become bulky and is nice.
View detail
It's handy to have!
My MT−09 does not have a Hook and I was having difficulty securing my luggage. So I installed this product.
It can also be used to attach the SeatBack's fixing strap without any problems.
It also helps when you have more luggage.
It is a convenient product to have and I am satisfied with it.
It would be nice if it was a little cheaper if I wanted.
View detail
It's a big help when you need it.
The MT-09 doesn't have a Hook so I installed this product along with the Plate hook.
When you're on the road and have more luggage, the more Hooks you have, the better.
A little cheaper would be nice
View detail
Increased loading capacity
Do you have trouble with the hook when loading?
I was having trouble hooking up Touring net and other Hooks due to my Ninja 1000 being Fenderless.
I think it is standard to put it on the Number place (front), but by putting it on the back, you can put Hook on it discreetly.
I chose Black, so it's even less noticeable.
View detail
For cars with less Loading Hook.
If you have the bolt holes, you can add a Loading Hook. It's a pity that it doesn't look like a pad, because it's very functional. View detail
Almost satisfied
Basically, it's a simple piece of work.
But Pe LePera is not surprisingly solidly made
It looks like it's a no-brainer.
If the Number bolt is too short, it may not reach you.
View detail
very good
I used a Rope hook with camping equipment to test it out The position of the hooks is very important It's perfect, so if you have a lot of luggage, you should give it a try I think it looks and feels good in Parenthesis View detail
It is easy to install.
I installed it on a GOLD WING
There is not much room in terms of size, but the installation is fine
Now you have more places to mount the Hook
I like the look of it and I like it
View detail
very good
In the installation, as it was described, the existing license plate is stopped by The length of the nut is not designed to be used for the installation of this product I bought the thing
Other than that, I have no problems with the fit It looks good, and I'm looking forward to having a point to put the Camping bag on
View detail
It's thick and secure
VTR250 (14 years MODEL) When installing the Tour Shell Case 2 and the MiddleField Seat Bag on I use it as a Hook
Previously, I was using a product with a hole in the top side only, but I installed the Tour Shell Case 2 I wanted a little more holes on the bottom side and the top side of the product is the same as that of the Rear Fender Because there was a gap between the License Plate and the License Plate, I was worried about it, so I used the License Plate I purchased this product which covers the entire surface
By the way, the front and back can be mounted in either direction I thought it is good to make it easy to use But you need to be careful not to hide the License Plate
good point
There is a buckle at the bottom of the Tour Shell Case 2 etc. and you want to attach the cord It is useful for
The license plate can be covered to prevent bending
Thick and sturdy
It won't rust so much
A bad point
It is difficult to straighten the cord when extending it upward It's just a matter of appearance, so it's not a problem ,
Quantity of holes:Pair (for Left and Right) I wanted it to be divided into three parts instead of two at a time I wanted to install it further down
The length of the Bolt that holds the License Plate is insufficient due to its thickness and the Nut is not long enough It can be a Limit I had no problem with it, but I was cringing
View detail
Design is zero
The MT-07 license plate is attached to the Material:Since it's Plastic, I'm more concerned about the durability around the mounting screws than this product
The texture of the Plate Hook 3 itself was a satisfactory finish
I'm going to gobble it up on this year's camping touring
View detail
Made in TANAX of safety and achievement
Recent Motorcycle has no Point to hook Loading Hook, so products that add this HookPoint's are necessities.
In the near future, we are forbidden to hide some of the License Plate by law amendment, but this product has already been addressed. TANAX's products can be used with confidence, including correspondence around here.
View detail
Be satisfied.
I am using it for H2SX-SE. With NORMAL as it is, the License Plate is only hanging from the Holder, so I was worried about distortion so I bought it. Quality is also satisfied well. Regarding Hook, it is a simple decoration because Pannier case is attached. View detail