Reviews
Hook was not needed.
Used on GPZ900R. The large hooks are not suitable for motorcycles with hooks, but the large mesh of Rubber is the best choice. View detail
Convenient to carry Helmet
[How is it used?
Helmet attached to Carrier.
How was your experience with it?
Large is better for touring net. For camping, it may be too small or too small.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's durable & textured.
I have used it extensively for touring and camping and it has not a scratch on it! The hooks are well made and easy to hang. The paint is high quality and does not rust or peel. The paint quality is high and does not rust or peel. It is an attractive part and I would recommend it to anyone! View detail
When it comes to touring, it’s Thanax.
Actually, I have a net in a size 5cm larger than this, but I bought it because I thought it would be nice to have a smaller web because I use Tanax's carrying cord so well. First of all, I like the unusual color and the size that is good for use as a seat bag. Actually, I have a net in a size 5cm larger than this, but I bought it because I thought it would be nice to have a smaller web because I use Tanax's carrying cord so well. First of all, I like the unusual color and the size that is good for use as a seat bag. -------------------------------------------------- -------- Actually, I have a net in a size 5cm larger than this, but I bought it because I thought it would be nice to have a smaller web because I use Tanax's carrying cord so well. First of all, I like the unusual color and the size that is good for use as a seat bag. Powered by Google Translator View detail
No inconvenience without it, but more interesting with it.
Installed because I go Touring a lot.
If you have Navigation on your phone, etc., there may not be much need for it.
While driving, it is also interesting to visualize the map in your mind while checking the direction of travel.
Installation is easy with double-sided tape, but it depends on the location of the tape.
Note that the magnetism from the Motorcycle prevents accurate display.
1Display an accurate heading away from the Motorcycle
2Apply it to the place where you like it and where it does not affect the Motorcycle in the state of Engine.
By the way, in the case of my CUB125, the Meter area is Large sturdy.
View detail
If you want to put Cargo on Tandem seat, it is essential!
It is attached using the Bolt on the License Plate. It is Firmly more than you think, so much so that it would be sufficient if the weight is not heavy enough to tow the vehicle. (I'm not sure what the actual load capacity is, though.)
I always have a buckle belt attached to my side bag, but I can also hang a Cargo Net Hook on it, which is very useful. This is a great price! Quantity per car:1 Set, required.
View detail
Good cupholder
t's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
Touring net is still TANA-X.
The Hook shape and thickness are also very solid. View detail
I use it all the time.
I've been commuting by Motorcycle for over 10 years now, and I've been using it to secure my luggage for a long time. I've tried other companies and Net, but in the end I keep coming back to it.
Stretchable and easy to hang.
View detail
Analog GPS..
I took a risk with this item as the only place to put it was on a non-magnetic metal instrument screen, and quite close to the instrumentation too. Unfortunately this does mean it does get occasional interference from magnetic fields on the bike. This isn't a big deal for me as I mainly just want to know which general direction my bike is travelling when in unfamiliar territory. If there was one thing this compass lacks, that would be a glow in the dark feature; which it doesn't have..hence it's useless when on the move at night. View detail
best cup holder
I've been riding motorcycles for about 10 years, buying and selling them many times.
This is a cup holder item that is always required.
It is light, sturdy, and has an excellent design.
Tanax is the origin of most cup holders sold in Korea.
In the photo, I mounted it on Ct125. -------------------------------------------------- -------- While riding a motorcycle for 10 years, I bought, sold, and sold it several times It is a cup holder item that is always required. Light, sturdy and design is excellent. Most of the cup holders sold in Korea are Tanax. The photo was mounted on CT125. Powered by Google Translator
View detail
To increase capacity when the need arises
The mesh is so fine that I don't think the luggage will fall out.
I was not sure about the large size, but it can be adjusted by attaching hooks in the middle without hooks on all four sides, so I think a slightly larger size is fine.
The rubber part is also firm and does not seem to deteriorate over time, so I think it can be used for a long time.
The Hook itself is also covered, so it is not likely to cause any damage to the motorcycle.
View detail
Is good
I bought this for fixing the Rear bag when doing RonTwo.
This is a Type that is co-tightened with the License Plate.
Easy to install and use with no problems.
View detail
Durable, long-lasting and fully functional!
[How is it used?
I purchased the cord from longtime seller TANAX because I needed it to secure large luggage for touring etc.
Was the one you received as per Image?
It is more solid and sturdy than Image.
How was your experience with it?
I have been using it for quite a long time, and although there are some fluffed areas, the elasticity is not compromised, it does not break, it is durable, and there are no functional problems at all.
[Points to note]
In terms of baggage, it is suitable for luggage with a capacity of more than 15 liters, so it would be difficult to secure it in a Small Bagetc.
How did it compare to other products?
Inexpensive competitors' products do not last long because the Rubber is stretched out or deteriorates over time, so as a result, this product, which lasts longer, is cheaper.
▼Mesh Type and this code can be used together to add even more breadth to your touring.
View detail
It looks good
Mounting ScrewQuantity clamping Number:Just remove the 2pc.
Therefore, 15 to 20 minutes of your time is all that is needed.
I chose Black because the surroundings are Black, but it is not noticeable.
There is a sense of unity.
The seat shape inevitably gapes in the front.
This position was where we wanted it.
This time, when I opened the box, I found the Package in the upper part of the box.
It was off. It was open.
I was disappointed thinking it was a return product. I also inspected the product when it was shipped.
I wonder how they are doing.
The product was fine, but...
View detail
Standard Plate hook
Standard Plate hook, easy to install, ideal for attaching a back to a RearSeat. View detail
great item
I am a SR400FI user. I have been using it with Henry Begins' touring seat bag in the past, and I was quite satisfied with its versatility. It's not damaged or lost yet, but I thought it would be nice to have a spare, so I bought an additional one. Recommended for touring. -------------------------------------------------- -------- SR400FI user. Previously, I was using Henry Biggins's touring seat bag, and I was very satisfied with its versatility. I haven't been damaged or lost yet, but I thought it would be good to have extra. Recommended for touring. Powered by Google Translator View detail
For CUBC125 Seat bag installation
Purchased a Belt for fixing Seat bag on CUBC125 (JA58)
The C125 has a small cargo bed area and not much space to fix the belt, so this plate is used.
Installation is as simple as removing the Number and re-fixing it on top of this Plate.
View detail
I would recommend it to anyone who is Touring.
It was installed for the addition of Hook.
There is not much space between the Tail lamp and the License Plate for the Fender Eliminator Kit, so there is a Hook next to the Plate. Three. I chose the
The texture is not that high, but it is thick and the Hook part is firm, and there is no weakness in the feeling of the Hook being applied.:Pair (for Left and Right) If it is fixed securely from both sides, there seems to be no problem with strength.
It is also recommended for motorcycles such as the SS series where it is difficult to secure the seat bag.
View detail
It's not bad, but there's no outstanding ingenuity or functional beauty.
I think this is a dead feature, although it is mentioned that it can be adjusted according to the Bottle width.
The construction of the Screw part seems to loosen easily if it is tightened frequently and repeatedly, so it cannot be used extensively.
The holder is recommended to be semi-fixed with a width that allows a 500ml bottle to fit in the limit.
If possible, I would have liked to see consideration such as a strong Spring type to make it easier to adjust the width.
Also, when installing a Short Screen on a car body or near the Grip, the Tumbler of ConvenienceCoffee, for example, must be careful because the container, which has lost its contents and become light, can easily be blown away by the driving wind, effectively littering the area.
I must say that if the Holder is not able to hold it securely until you throw it in the trash yourself, it is not a very good drink holder.
I would like to see a mechanism to keep Hold on the Bottle.
Also, if the Handlebar is installed as is, it will scratch the paint on the Handlebar, so I think it should at least come with a weather-resistant rubber plate.
After about three years of use, there has been almost no deterioration, and the product seems to be made to be resistant to rust and deterioration, so the durability aspect is promising.
View detail